Lowest price in the last 60 days: £ 275
Prices and availability may change several times a day. Check the current data directly in the e-shops. You can find all available colors and sizes directly in the e-shops.
The automatic monitor alignment system (Automatic Monitor Alignment) MA 1 ensures the best possible sound quality in any room, be it a living room or a listening studio. The calibrated measuring microphone in conjunction with the calibration algorithms, developed in cooperation with the Fraunhofer IIS Institute, guarantees optimal adjustment of amplitude and phase correction. The result of the process is absolutely accurate and reliable sound for ideal monitoring. The MA 1 system is designed for direct control of the parameters of monitors equipped with a DSP converter - KH 80 DSP and KH 750 DSP. Through the KH 750 DSP subwoofer, you can also use calibration for 'analog' monitors, i.e. KH 120, KH 310 and KH 420. Unlike standard calibration systems, MA 1 is an integral solution with completely new algorithms designed exclusively for Neumann monitors. No plugin or PC driver is needed for calibration, all data is stored in the monitor's DSP processor. The uniqueness of the MA 1 is the optimization of not only the amplitude but also the phase response. This provides the highest accuracy of tonality and reproduction. Type: Measurement Microphone Impedance: 50 Ohm Sensitivity: 30 mV/Pa Sound Pressure Level (SPL): 132 dB Frequency Range: 20 Hz - 20 kHz Interface: XLR Application: Studio Capsule Type: Pressure gradient transducer Polar Pattern: Omnidirectional
The automatic monitor alignment system (Automatic Monitor Alignment) MA 1 ensures the best possible sound quality in any room, be it a living room or a listening studio. The calibrated measuring microphone in conjunction with the calibration algorithms, developed in cooperation with the Fraunhofer
The MM 1 is a condenser omnidirectiona measurement microphone which has been designed specifically for measuring sound reinforcement and PA-systems. It is designed to work with spectrum analysers for measuring frequency response and sound pressure levels of loud speaker systems. The MM 1 is the
Sonarworks Calibrated Measurement Microphone - XREF20R5 | An omnidirectional measurement microphone with individual calibration profile. Every microphone has been measured by Sonarworks acousticians against an ANSI certified measurement microphone. This means perfect accuracy within the audible
Condenser microphone with large diaphragm and classic Neumann design. It is designed for universal use. Has a cardioid directional characteristic, acoustic-pressure gradient system, transformerless circuitry, frequency response 20 Hz - 20 kHz, impedance 50 ohms, maximum sound pressure 138 db SPL
Condenser microphone with large diaphragm and classic Neumann design. It is designed for universal use. It has a changeable directional characteristics (omnidirectional, wide angle cardioid, cardioid, hypercardioid, figure-8), switch for selected parameters with LED signalization, pressure-acoustic
The U87 is probably the best known and most widely used Neumann studio microphone. Every sound engineer will immediately recognize it by its characteristic shape. It is an excellent choice for general use in studios, broadcasting, film and television. It is also used as the main microphone when
Condenser microphone with a compact body and classic Neumann design. It is designed for universal use. It has a cardioid polar pattern, frequency response 20 Hz - 20 kHz, impedance 50 ohms, maximum sound pressure 144 db SPL and slight presence boost above 6 kHz. The microphone capsule is placed in
The BCM 705 is Neumann’s first dynamic microphone. The housing and headgrille are identical to those of the BCM 104; only the green logo indicates that this is something new from Neumann. The principle of reduction to the essentials can be seen in the dynamic capsule with a hypercardioid
The microphone's smaller dimensions contribute to an exceptionally compact appearance that nevertheless fits in with the classic Neumann design. The elegant shape together with the chrome-plated ring catches your attention at first glance. Inside the microphone is a newly developed large-diaphragm
The microphone's smaller dimensions contribute to an exceptionally compact appearance that nevertheless fits in with the classic Neumann design. The elegant shape together with the chrome-plated ring catches your attention at first glance. Inside the microphone is a newly developed large-diaphragm
Wind protection for the TLM 102 microphone. The diameter of the wind protection is 80 mm. It is produced in black. Foam wind shields prevent disturbing sounds that arise from wind, rapid movements of the microphone pole or sensing from a short distance. They are made of special foam (polyurethane
Studio microphone. The Neumann U 87 Ai is probably the best-known and most frequently used studio microphone the world over. Its smooth and refined sound is as iconic as its elegant exterior design. The U 87 Ai is the standard microphone for speech and vocals. Three polar patterns plus pad and low
The KMS 104 plus is a studio grade vocal microphone for stage use with a Neumann condenser capsule and all the virtues of a rugged stage microphone: excellent pop protection, enormous SPL capability, and high feedback resistance, thanks to its tight cardioid pattern. Compared to the KMS 104, the
The 'Series 180' consists of three compact miniature microphones with patterns that satisfy the demands of all common studio applications. Because of its optimized mechanical construction and conscious omission of modularity, which is unnecessary in many cases, the 'Series 180' is predestined for
The 'Series 180' consists of three compact miniature microphones with patterns that satisfy the demands of all common studio applications. Because of its optimized mechanical construction and conscious omission of modularity, which is unnecessary in many cases, the 'Series 180' is predestined for
Foam wind shields prevent disturbing sounds that arise from wind, rapid movements of the microphone pole or sensing from a short distance. They are made of special foam (polyurethane foam with open cells) and do not cause disturbing resonances or affect the directional characteristics of the
The 'Series 180' consists of three compact miniature microphones with patterns that satisfy the demands of all common studio applications. Because of its optimized mechanical construction and conscious omission of modularity, which is unnecessary in many cases, the 'Series 180' is predestined for
The 'Series 180' consists of three compact miniature microphones with patterns that satisfy the demands of all common studio applications. Because of its optimized mechanical construction and conscious omission of modularity, which is unnecessary in many cases, the 'Series 180' is predestined for
The 'Series 180' consists of three compact miniature microphones with patterns that satisfy the demands of all common studio applications. Because of its optimized mechanical construction and conscious omission of modularity, which is unnecessary in many cases, the 'Series 180' is predestined for
Broadcast condenser microphone with large-diaphragm capsule which has a flat frequency response up to 3 kHz, and cardioid directional characteristic that is ideal for the faithful reproduction of speech and music. It features integrated pop protection and elastic suspension, easy to clean
Large diaphragm condenser microphone. The extremely quiet self-noise of the TLM 103 is regarded a milestone until today. In technical terms: a noise level of just 7 dB(A). In other words: the TLM 103 is so low noise that even the faintest nuances become audible. Thus, it is perfectly suited for
Microphone clip for fastening KMS 104/105 microphones. The clip is tiltable and has a 5/8'-27 female thread with a reduction to 1/2' and 3/8' for mounting on a microphone stand. It is produced in matte black. | Compatible with: Neumann KMS105 | Colour: Black
Ultralinear measurement condenser microphone that is perfectly suited for room equalization, highresolution recording and live applications (mainly acoustic instruments and vocals), and for use with Behringer Ultracurve or any other audio spectrum analyser. Microphone features electret condenser
The ECM999 is an omni-directional microphone for free-field measurement with built-in highly-reliable circuit, 1/4” pre-polarized condenser capsule, high stability, low distortion, and less noise in performance. Its excellent flat frequency response make it an idealcandidate for sonic analysis