Stage Equipment351

Cordial CYB-STAGE-BOX-CARRY-CASE 3

Duratruss DT-TABLE 2 3 Truss furniture

Stage table with three straight legs. It is made of solid steel construction and equipped with wooden top. Dimensions: 590 x 1100 mm. | Made in: China

Duratruss DT-TABLE 1 3 Truss furniture

Stage table with three curved legs. It is made of solid steel construction and equipped with wooden top. Dimensions: 590 x 1100 mm. | Made in: China

Bespeco PR2K

IMG Stage Line FLAT-M200 Active Stage Monitor

Active stage monitor (monitoring) power max. 300 W. Flat and very compact design. Equipped with 4 x 10 cm (FaitalPRO, 4 x 4 ') wideband speakers with neodymium magnets. Control panel offer: input combo connector XLR / 6.3 mm Jack Mic / Line. Output OUT XLR connector. VOLUME and TONE control (sound

dB Technologies LVX XM12 Active Stage Monitor

Two-way active stage monitor from LVX series that is equipped with heavy duty components and features a particular coaxial horn design, delivering a powerful yet clear sound quality. The design enhances the benefits of coaxial wedges concept and does not only shape high frequencies’ directivity,

Konig & Meyer 11992 Stage platform beam

Set of 4 plug-in feet made of aluminum for conductor podium 11990. Integrated levelling screws to adjust for uneven surfaces: for conductor podium hight 20 cm. Dimensions diameter: 50 x 182 mm. Weight: 0,31 kg. | Made in: Germany

Konig & Meyer 11993 Stage platform beam

Set of 4 plug-in feet made of aluminum for conductor podium 11990. Integrated levelling screws to adjust for uneven surfaces: for conductor podium hight 40 cm. Dimensions diameter: 50 x 382 mm. Weight: 0,47 kg. | Made in: Germany

Duratruss DT 23-050 Triangle truss

Straight construction with transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 500 x 220 x 194 mm. Weight: 1,4 kg. | Height (cm): 50.0 | Width

IMG Stage Line MR-402 Rack Case

Flight case, 2 RSMultilayer multiplex wood, black laminatedAluminium profile edgesChromium-plated ball protection corners, reinforcing angles and connectorsAluminium rails at the front and rear with M6 cage nuts for variable installation of devices, no slipping of the cage nuts, thus easy

Behringer Eurorack Rack

The EURORACK RACK is ideal for any Behringer Eurorack-style synthesizer or equipment. This desktop/rack-mount kit converts a 19” rack into an 84 HP Eurorack chassis. A compact 4 HP power supply with two flying bus boards are included together with a 3A universal power adapter. 52 sliding nuts

Behringer Powerplay P1

Personal In-Ear amplifier ideal for stage and studio applications offering a reliable and affordable personal monitoring solution. This In-ear stereo system provides the option of a stereo or mono signal and is powered by a 9V battery with a 12-hour operating time. It is controlled by

Duratruss DT 23-C19-L45 Triangle truss

2-way construction with 45° angle and transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 1000 x 1000 x 194 mm. Weight: 3,2 kg. | Made in:

Duratruss DT 23-C21-L90 Triangle truss

2-way construction with 90° angle and transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 500 x 500 x 194 mm. Weight: 2,1 kg. | Made in: China

Duratruss DT 23-C22-L120 Triangle truss

2-way construction with 120° angle and transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 500 x 500 x 194 mm. Weight: 2,2 kg. | Made in:

Duratruss DT 23-C23-L135 Triangle truss

2-way construction with 135° angle and transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 500 x 500 x 194 mm. Weight: 2,4 kg. | Made in:

Duratruss DT 23-C25-L90 Triangle truss

2-way apex in construction with 90° angle and transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 500 x 500 x 220 mm. Weight: 2 kg. | Made in:

Duratruss DT 23-C41 Triangle truss

4-way X-joint with 90° angle and transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 500 x 500 x 194 mm. Weight: 2,7 kg. | Made in: China

Duratruss DT-STOOL 1 4 Truss furniture

Stage chair with four straight legs and a square footrest. It is made of steel and fitted with wooden seat. Dimensions: 350 x 630 mm. | Made in: China

Markbass Mark Stand

When playing on a small stage and standing close to your rig, it can be difficult to hear yourself. This ingenious little accessory shows how well Markbass understands the needs of working bass players. Especially on smaller stages, bassists often need to angle their cabinet upwards (in 'monitor'

Samson SRK S1U

Universal rack shelf for equipment without rack mounts with a height of 1 unit with four mounting points for mounting in a rack, is constructed of cold-rolled steel plates, easy removal of hot air is provided by openings on the sides, ideal for use with SRK racks | Made in: China

Bespeco RMTROLLY

Sliding platform for rack cases, equipped with fully rotating wheels and brakes. It is made of wood in black color, dimensions: 620 x 515 x 18 mm. | Made in: Italy

Samson SRK12

Samson's rugged equipment racks are solid steel and feature fully enclosed steel side panels. They are available in four sizes: 8-space (SRK8), 12-space (SRK12), 16-space (SRK16) and 21-space (SRK21). The racks are set upon 4 heavy-duty, 3-inch (75 mm) casters with locking fronts. Each Samson

Duratruss DT 23-C24-L90 Triangle truss

2-way apex out construction with 90° angle and transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 500 x 500 x 220 mm. Weight: 2 kg. | Made

Duratruss DT-BPS-4040 Truss base plate

Truss plate designed for stage construction. It is made of solid steel and includes half connectors. Dimensions: 400 x 400 x 10 mm. Weight: 12,2 kg. | Made in: China

Duratruss DT 23-C25R-L90 Circle truss

2-way rounded corner with 90° angle and transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 500 x 500 x 220 mm. Weight: 1,7 kg. | Made in:

Duratruss DT 23-C24R-L90 Circle truss

2-way rounded corner with 90° angle and transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 500 x 500 x 220 mm. Weight: 1,5 kg. | Made in:

Duratruss DT-STOOL 3 3 Truss furniture

Stage chair with round base, three straight legs and a round footrest. It is made of steel and fitted with wooden seat. Dimensions: 350 x 850 mm. | Made in: China

IMG Stage Line ECM-2500

Electret tie clip/lavalier microphone that is equipped with a cartridge of omnidirectional characteristic and removable clip for various installations. It is supplied with a phantom power supply adapter EMA-20 that requires one 1.5V AAA size battery (not included). It provides connection via 3.5mm

IMG Stage Line MR-DMIX20 Rack Case

Flight case, for transporting one digital audio mixer DMIX-20. Multilayer multiplex wood, black, plastic-laminated. Aluminium profile edges. Chromium-plated ball protection corners, reinforcing angles. Butterfly locks, folding recessed handle.SpecsDimensions: 505 x 200 x 470 mmWeight: 8.5 kg | Made

Shure WA570A

Belt pouch for wireless bodypack transmitters. Neoprene Belt Pouch for Shure Wireless Bodypack Transmitters. Ideal for fitness instructors. Works with the following transmitters: LX1, SC1, SLX1, T1G, T1, U1, UC1, ULX1, UT1, PGX1, Color: Black | UK/EU Power supply included: No

Duratruss DT 23-C31-ULDR Triangle truss

3-way apex up right construction with 90° angle and transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 500 x 500 x 500 mm. Weight: 3

Duratruss DT 23-C32-ULDL Triangle truss

3-way apex up left construction with 90° angle and transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 500 x 500 x 500 mm. Weight: 3

Duratruss DT 23-C33-LD Triangle truss

3-way apex down right construction with 90° angle and transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 500 x 500 x 500 mm. Weight: 3,2

Duratruss DT 23-C34-LD Triangle truss

3-way apex down left construction with 90° angle and transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 500 x 500 x 500 mm. Weight: 3,2

Duratruss DT 23-BPM Truss base plate

Base plate male designed for stage construction. It is made of solid steel and includes half connectors. Dimensions: 240 x 212 x 5 mm. Weight: 1 kg. | Made in: China

Duratruss DT 23-C52-XU Triangle truss

5 way X-joint + up with 90° angle and transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 500 x 500 x 500 mm. Weight: 3,5 kg. | Made in: China

Duratruss DT 23-C44-LUD Triangle truss

4 way corner + up + down right with 90° angle and transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 500 x 500 x 500 mm. Weight: 3 kg. | Made

Duratruss DT 23-C45-LUD Triangle truss

4 way corner + up + down left with 90° angle and transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 500 x 500 x 500 mm. Weight: 3 kg. | Made

Duratruss DT 23-T42-DTD Triangle truss

4 way T-joint + down with 90° angle and transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 500 x 500 x 550 mm. Weight: 3 kg. | Made in: China

Duratruss DT 23 C61 Triangle truss

5 way T-joint + up + down with transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 500 x 500 x 500 mm. | Made in: China

Duratruss DT-STOOL 2 3 Truss furniture

Stage chair with round base, three curved legs and a round footrest. It is made of steel and fitted with wooden seat. Dimensions: 350 x 640 mm. | Made in: China

IMG Stage Line ECM-402L

Miniature version of an electret tie clip/lavalier microphone that is equipped with a cartridge of cardioid pick-up pattern characteristic. It is supplied with a 1.2m long cable with unbalanced 3-pole mini XLR connector for connection to an optional phantom power supply adapter (EMA-300P) or a

Duratruss DT 23-WPM Truss base plate

Wall plate male designed for stage construction. It is made of solid steel and includes half connectors. Dimensions: 240 x 212 x 5 mm. Weight: 1 kg. | Made in: China

Duratruss DT 23-T43-UTD Triangle truss

4-way T-joint + up unit for stage construction, with a 90° angle. It is made of steel, and can be powdercoated in every RAL colour. Dimensions: 500 x 500 x 500 mm. Weight: 3 kg. | Made in: China

Duratruss DT 23-T51-TUD Triangle truss

5 way T-joint + up + down with 90° angle and transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 500 x 500 x 500 mm. Weight: 3,8 kg. | Made

Soundking KC 15D Active Stage Monitor

Active monitor in a wooden box equipped with a 15' speaker with a power of 1000W. It has a maximum acoustic pressure of 129 dB and works in the frequency band 55Hz - 20kHz. Includes XLR/Jack 6.3 mm TRS Combo inputs (2x), RCA Line IN and XLR M outputs (2x). | Microphone Input: Yes | AUX IN: Yes | MP3 /

Duratruss DT 23/2-025 Triangle truss

Straight construction with transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. | Width (cm): 22.0 | Material: Aluminium | Made in: China | Weight: 1,1 kg | Package

Soundking KC 12D Active Stage Monitor

Active monitor in a wooden box equipped with a 12' speaker with a power of 1000W. It has a maximum acoustic pressure of 128 dB and works in the frequency band 55Hz - 20kHz. Includes XLR/Jack 6.3 mm TRS Combo inputs (2x), RCA Line IN and XLR M outputs (2x). | Bluetooth: No | Made in: China | Power RMS

LD Systems HPA 1

The LD Systems HPA 1 is a versatile headphone amplifier with high power output for stage, studio and home recording and is the perfect solution for wired in-ear-monitoring.. The compact device in a rugged, ergonomically shaped plastic housing with soft-touch surface and practical belt clip is very

Decksaver Le Soundswitch Control One

Custom moulded in the UK to fit the contours of the Le Soundswitch Control One. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst

Bespeco RM2EX Rack Case

Made of ABS. Covers equipped with butterfly latches. Sturdy aluminium handles. Front and rear rack bar. Screws set for equipment assembling included. Black color. | | Weight: 4 kg | Made in: China

Bespeco RACKB10

10U rack construction for installations in recording studios that is compatible with Bespeco RACKB10R. It is made of sturdy metal with nontoxic powder coating for better protection of the instruments.  | Made in: China

PROEL PPCASE12W Utility case for stage

Modified polypropylene injection molded case. Equipped with practical pull retractable handle, with locking system and recessed wheels in the structure. The PPCASE series of Proel cases, built with high quality standards, have been designed and created to transport and protect sensitive equipment

Decksaver SQUARP INSTRUMENTS HAPAX

Hapax boosts creativity as it can synchronize and sequence all of your synthesizers, DAWs and much more together, therefore, it is crucial you protect it!The Hapax utilizes a lot of touch-heavy pads, knobs and LCD screens, which are important to its use and operation. However, accidents can happen

Decksaver Solid State Logic UC1

Custom moulded in the UK to fit the contours of the Solid State Logic UC1. Designed for the Digital DJ, super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling DJ. Shields faders and controls from dust, liquid

Decksaver Solid State Logic UF8

Custom moulded in the UK to fit the contours of the Solid State Logic UF8. Designed for the Digital DJ, super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling DJ. Shields faders and controls from dust, liquid

PROEL PPCASE13W Utility case for stage

Modified polypropylene injection molded case from Proel. Equipped with practical pull retractable handle, with locking system and recessed wheels in the structure. | Depth (cm): 42.0 | Colour: Black | Interior Length (mm): 36.0 | Interior Depth (mm): 22.5 | Interior Width (mm): 49.0 | Type: Case | Height (cm):

Artiphon Orba Silicone Sleeve BK

Add an extra layer of protection to your Orba with Silicone Sleeve. This flexible sleeve allows full access to buttons and cable ports and features a removable strap long enough to attach Orba to your wrist or backpack. Silicone cover for Artiphon Orba Device fully playable and operable Carrying

Black Lion Audio PBR8 500

Equipped with a fully balanced TT/Bantam patchbay, the PBR-8 is an 8-slot 500 Series chassis with unlimited routing options for quickly dialing in sounds without your modules having to be mounted in any particular order. With the PBR-8, you can easily audition a signal chain, re-route it, split it

Decksaver BEHRINGER X-TOUCH

While the X-Touch might be the perfect controller for your Ableton, Logic or the like, it doesn’t have the perfect protection against damage and any other bad mishaps.To fix this problem they have carefully crafted and manufactured a cover to protect the Behringer X-Touch. Super durable

Black Lion Audio PG-2 F

The PG-2 F provides clean and sufficiently dimensioned power for your equipment. In its production, high-quality components are used, including Panasonic and Wima capacitors. Thanks to their excellent properties and PG-99 technology, up to 99.7% of high-frequency noise and interfering components

Decksaver Zoom Podtrak P4

Have you ever considered how much you rely on your hardware? Units such as the Podtrak P4 sit at the very heart of your setup and without them, content cannot be captured. Dust, liquid and accidental impact have taken many a good hardware unit down over the years – this is where Decksaver steps

Turbosound TS-PC10-1

Use this Turbosound Deluxe Water-resistant Cover to keep your Turbosound iQ10 or other 10' loudspeaker safe from the elements. Thick interior foam padding protects against bumps during transport, and convenient handle openings make it easy to unload your speakers without having to remove this

Turbosound TS-PC15-1

Protective cover for iQ15 and iX15• High quality water repellent protective cover for Turbosound iQ15 & iX15• Tear-resistant multi-layer nylon guarantees the best protection against dirt and dust• Coarse padding safely protects during transport• Precisely fitting shape with corresponding

Avante 1161350020

Whells for Avante A15S and A18S subwoofers. 4x wheels with brake | Made in: China

Decksaver BEHRINGER RD-9

Behringer RD-9 cover is custom-moulded to perfectly fit whilst accommodating cables, meaning the RD-9 can sit ready for operation while being fully protected. Super durable polycarbonate shell features extreme durability and offers the highest degree of protection.You will never have to worry about

Gator GM-1W

Gator Cases GM-1W Singular Wireless Microphone System Padded Bag provides solid support and premium protection for your Single Wireless System. A lightweight, durable nylon outer shell surrounds convenient compartments designed specifically for your system. Your receiver rests securely inside along

Artiphon Orba Travel Case

Protect your Orba with our impact-resistant softshell case, made from durable EVA plastic foam, and lined with soft fabric. Beneath the zippered lid is a compartment for your charging cable, and there’s a lanyard for carrying or clipping the case to your backpack. Shockproof softshell bag for

Turbosound TS-PC12-1

Use this Turbosound Deluxe Water-resistant Cover to keep your Turbosound iQ12, iX12, or other 12' loudspeaker safe from the elements. Thick interior foam padding protects against bumps during transport, and convenient handle openings make it easy to unload your speakers without having to remove

Turbosound TS-PC18B-1

Use this Turbosound Deluxe Water-resistant Cover to keep your Turbosound iQ18B or other 18' subwoofer safe from the elements. Thick interior foam padding protects against bumps during transport, and convenient handle openings make it easy to unload your speakers without having to remove this cover

Decksaver LE Behringer X-Touch One

Custom moulded in the UK to fit the contours of the LE Behringer X-Touch One. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst

Samson PB10-PRO

Professional rack-mountable power distributing and rack-lighting unit that is exceptionally useful for any rack and provides comprehensive power distribution, metering and lighting in one rack space. Its large, easy-to-read front panel metering system includes a 10-segment voltmeter to ensure

ART PB4x4

The voltage stabilizer with a capacity of 1800 W and a solid steel construction. It has RFI and EMI filters and a built-in Surge and Spike Protection system designed to protect the powered device. On the front panel there is a 15 A circuit breaker, switch and backlit input voltage meter. There are

Roland CB-RAC

Protect your AIRA Compact instrument with this official Roland carrying case. Streamlined and rugged, it features a semi-rigid EVA shell and tough polyester exterior. An internal mesh pocket provides a convenient home for a USB charging cable.Custom carrying case for Roland AIRA Compact

Bespeco RACKB10R

10U rack for installations in recording studios that provides maximum carrying capacity of 70 kg and useful depth of 485 mm. It is made of sturdy metal with black nontoxic powder finish. | Made in: China | Width (cm): 54.0 | Type: Rack | Depth (cm): 48.0 | Height (cm): 62.0 | Load Capacity: 70 kg | Weight: 11 kg

Light4Me BLINDER LED 4x100W

Introducing the Light4Me Blinder LED 4x100W, a fully professional stage spotlight equipped with four 100-watt COB LED diodes, emitting warm and cold white light. This versatile illuminator creates captivating atmospheres for various events, illuminating stages, and producing strobe effects. An

ART TPatch

The ARTcessories TPatch is a compact 8-point balanced patchbay that organizes your cables into a convenient central location on your studio desktop. Designed for maximum flexibility, the TPatch has 1/4 '' TRS phone connectors user selectable normal and half-normal modes.The compact black-anodized

Gator GM-1WEVAA

EVA Foam Case for A Single Wireless Mic System; half rackSlim Rigid 5mm EVA Rubber Foam DesignHolds Most Common Sized 'Half-Rack' Wireless UnitsFront and rear access unzips for easy setup in the fieldZipper access to allow antenna to be in place and functional while in bagStorage for receiver,

Decksaver Solid State Logic SSL 2 and SSL 2+

An integral and vital component of many studio and mobile recording setups – we wouldn’t like to wager how many sessions have been halted in their tracks by misplaced coffees and beers infiltrating these units. Cover offers peace of mind and protection against these little disasters. Custom

Turbosound TS-PC15B-1

The super-tough, black nylon TS-PC15B-1 fits your Turbosound loudspeaker like a glove, and protects your investment in tone from the dirt, dust and rain – and is an amazingly-affordable way to keep your gear looking great for years. | Material: Nylon | Water Resistance: Yes | Suitable for: Turbosound

Decksaver RME Babyface Pro FS & Madiface Pro

Custom moulded in the UK to fit the contours of the RME Babyface Pro FS & Madiface Pro. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental

Roland CB-RU10

Specially designed for music products and accessories, the CB-RU10 provides a protective, well-organized home for your gear while traveling around town and beyond. This quality backpack-style bag is ideal for carrying one or more Roland electronic instruments—such as the TR-8S Rhythm Performer,

Boss CB-BU10

Specially designed for music products and accessories, the CB-BU10 provides a protective, well-organized home for your gear while traveling around town and beyond. This quality backpack-style bag is ideal for carrying a BOSS multi-effects processor or Loop Station plus cables, pedals, footswitches,

Zoom PCF-8N

The Zoom PC-8n is a protective case designed to house your Zoom F4, F8, or F8n multi-track recorder in the field. It provides bottom, top, and side access to your recorder, so you can easily tend to your duties during the session. | | The removable clear-window cover allows you to keep an eye on

Palmer PPB 10

10 channel audio splitter for press conferences and other applications. On a transformer split basis, one line input is split out to ten outputs. All inputs and outputs are balanced transformer isolated. Line input and outputs. Adjustable input gain (-8 to +25dB). Level meter. Headphone output to

Palmer PPB 20

20 channel audio splitter for press conferences and other applications. On a transformer split basis, one line input is split out to ten outputs. All inputs and outputs are balanced transformer isolated. Line input and outputs. Adjustable input gain (-8 to +25dB). Level meter. Headphone output to

Yamaha Dollyboard DLSP1K

The Yamaha DL-SP1K is a trolley for the STAGEPAS 1K and features four buckles for locking the cover and four wheels for ease in transportation. An anti-roll pad is included. Once installed, the case can be easily lifted by using the built-in handle on the STAGEPAS through the open flap on the cover

DJ Techtools Chroma Cover Midi Fighter Twister / Spectra / 3D / Classic

Protective dustcover lids for Midi Fighters. It was made to protect your expensive controllers from disaster both on-stage and in the home or studio. Think of the Chroma Cover as an investment in a protective shield that repels any liquid or impact issues and protects the perfection of your

Monacor RCP-8702U

Closed 2U rack panel that is ideally suited for individual pair of 19”/482mm systems. It is made of 1.5mm thick steel with black plastic coating. The upper and lower 8mm edges are angled in different configurations. Outer dimensions: 483 x 89 mm. | Made in: Taiwan

Light4Me RC1 COVER

Light4Me RC1 is a professional stage lighting cover that protects equipment against rain on open-air stages, but also against the scorching sun or falling leaves. The cover is made of waterproof synthetic fabric and transparent soft polyethylene forming the lampshade. The excellent sliding

Light4Me RC2 COVER

Light4Me RC2 is a professional stage lighting cover that protects equipment against rain on open-air stages, but also against the scorching sun or falling leaves. The cover is made of waterproof synthetic fabric and transparent soft polyethylene forming the lampshade. The excellent sliding

MARK RMI009

RMI 9 PRO is a 9U 19' wallmounted cabinet for IT and installation. It offers a wide range of exceptional features, which, together with a static load capacity of 60 kg and a coldrolled steel construction, predestined it for professional use.Steel construction.Tempered glass door with key

InEar Hearmix Pro

The hearmix® PRO is an active ambience sound system. A special cable with built-in microphones allows the infinitely variable control of the outside sound by the musician himself on the body (no extra technicians, mixing console, additional microphones needed). The audience and ambient sounds

Sennheiser GA 4

Rackmount Set for the evolution wireless D1 EM stationary receiver.. Consists of rack mount and antenna converter. Fixing equipment included | Made in: Germany

ART SP4x4

Power distribution system. The SP 4x4 features a backlit linear meter to monitor input voltage, which gives the user a familiar analog style readout when monitoring voltage from a power source. Four of the eight rear outputs are 1,25 inches apart. This allows the user to plug in wide power cables

RME MADI Router

Building on the eight year success of the MADI Bridge and the MADI Converter, RME presents a newly designed device that is a worthy successor of both - in fact, its innovative core will redefine and inspire MADI systems for years to come.The MADI Router is a compact device designed to link MADI

Furman P-2300 IT E

10 A voltage regulator. Designed for the most critical, ultra-low noise installations, supplies up to 10 amps of balanced AC power ideal for recording studios, broadcast stations, video production facilities, or any environment requiring a pristine, studio-quality signal-to-noise ratio. Features a

Duratruss DT 30/40-FCBC Truss accessory

Female connector for box corner DT34. Connector: Female. | Made in: China

Monacor RCP-8704U

Closed 4U rack panel that is ideally suited for individual compilation of 19”/482mm systems. It is made of 1.5mm thick steel with black plastic coating. The upper and lower 8mm edges are angled in different configurations. Outer dimensions: 483 x 177 mm. | Made in: Taiwan

Mackie Thump 12 Bag for loudspeakers

Transport cover for Mackie THUMP12 speaker. It is made of durable black nylon with internal padding and serves as protection during speaker transport. It features a zipper closure, solid handles and storage space for equipment located on the front side. | Material: Polyester;Polyurethane | Zip:

Monacor RCP-8731U

Rack panel (1 RS) with six NEUTRIK D-series punched holes that is compatible with various connectors, e.g. NC-3MDL1, NC-3FDL1, NL-2MP, NL-4MP. Due to different hole spacing with panel connectors of the D and P series from NEUTRIK, manual modification of the rack panels was necessary up to now in

Chauvet Nimbus Cart

Nimbus Cart easily transports your Nimbus dry ice machine to and from the car and around the dance floor. Four high-strength, ball bearing casters allow for smooth transportation, while two locking casters securely transport Nimbus by locking it in place. Highlights:Easily transport your Nimbus

Gator GR-2L

Moulded 2U rack case with lightweight polyethylene construction and threaded, filed replaceable 7mm zinc-plated steel front and rear rack rails. It provides total rack-able depth of 19.25”/489 mm for versatile use. It features four heavy-duty twist latches that provide better safety of the case

PROEL ADRK2CR

Lockable 19” - 2U - steel construction metal rack drawer with telescopic zinc plated slides. | Made in: China

PROEL ADRK3CR

Lockable 19” - 3U - steel construction metal rack drawer with telescopic zinc plated slides. | Made in: China

Behringer Eurorack Ears (70HP)

The Behringer EURORACK EARS (70 HP) is a pair of mounting brackets that allow Behringer synthesizers and other 3U format equipment to fit in all 70 HP EURORACK chassis. | | Made in: China

Behringer Eurorack Ears (80HP)

The Behringer EURORACK EARS (80 HP) is a pair of mounting brackets that allow Behringer synthesizers and other 3U format equipment to fit in all 80 HP EURORACK chassis. | | Made in: China

Duratruss DT 23-T36H Triangle truss

3-way horizontal T-joint construction with 90° angle and transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 500 x 500 x 194 mm. Weight: 2,4

Soundcraft RW5745

Rackmount adapter for MFX8 / MPM8. Package includes 2 rack-mounts for the EMP 8-channel audio mixer and offers an easy instalation into a standard 19-inch rack. Color: Black. | Made in: China

dbx PMC16

Personal monitor controller. The PMC16 is a 16 channel personal monitor controller which allows the user to create a custom mix from 16 channels of audio. Designed to be used with the dbx TR1616 or any other BLU link compatible device, the PMC16 allows for monitoring with headphones, in-ear

Furman M-10LX E

10A Standard Power Conditioner. Install it in to the top slot of your rack, and the ten switched outlets in the rear panel will power up and protect all your equipment up to a 10-amp load. Main features are: Noise Filtration - AC noise filtering to reduce radio frequency and electromagnetic

Furman P-6900 AR E

30 A voltage regulator and conditioner. Features: True RMS Voltage Regulation - True RMS Voltage Regulation delivers stable voltage output (selectable between 230V and 240V) to protect equipment from problems caused by AC voltage irregularities. Surge Protection - Furman’s exclusive SMP

Behringer GMX-300 3 m

The GMX-300 connects your microphones or stage equipment directly to any XLR audio source and is optimized for stage and studio applications.The GMX Series multicore cables are available in two different lengths for all types of setups: 10 ft/3.0 m, 16.4 ft/5.0 mThe GMX-300 features a 8 x 0.22 mm²

Behringer GMX-500 5 m

The GMX cables connects your microphones or stage equipment directly to any XLR audio source and is optimized for stage and studio applications. The GMX Series multicore cables are available in two different lengths for all types of setups: 10 ft/3.0 m, 16.4 ft/5.0 m. The GMX cables features a 8 x

EIKON RM3000EK 863 - 865 MHz

The new in-ear monitoring system offers outstanding sound quality and high dynamic range. The system allows switching between mono or stereo mode for all the needs of live musicians, actors or speakers. The integrated limiter guarantees an optimal level of protection and a uniform sound

Soundcraft RW5745

Rackmount adapter for MFX8 / MPM8. Package includes 2 rack-mounts for the EMP 8-channel audio mixer and offers an easy instalation into a standard 19-inch rack. Color: Black. | Made in: China

Furman AC-210A E

10 A two outlet power conditioner. Furman's exclusive SMP Technology provides the highest level of surge & spike protection available. LiFT offers linear AC power filtering to ensure clean power for unequaled audio & video clarity. Auto-Reset EVS circuitry detects dangerous voltage irregularities

Presonus HP2

Headphone, stereo amplifier with battery power supply. It has clear and loud sound, and is made of solid construction. It is the ideal choice for musicians, and delivers signal to in-ear monitors or headphones. It is equipped with two XLR input jacks (female) and one 3.5 mm headphone jack output

RCF CR 2642

The CR 2600 series rack enclouseres are designed to hold all RCF 19' rack standard components. The rack enclosures are bake-painted at high temperature using epoxy powders to make the structure unalterable over timeand resistant to scratching, abrasion, and atmospheric agents. The CR 2600 SERIES