Electronics Components69

SRAM Red AXS Power Meter Kit 35T-48T Power Meter

TECHNOLOGY |   | | AXS | | AXS is SRAM’s new bike component integration system that connects electronic bicycle components and software. The SRAM AXS app allows riders to see battery status, change component behavior, personalize controls, get maintenance reminders, and update firmware. |  

DPA DAD6001-BC

Adapter for powering Miniature Microphones via standard P48 phantom power. Designed for use with miniature microphones from DPA. Belt clip is included. This adapter is active-signal balanced, which improves suppression of induced electromagnetic noise. Common Mode Rejection Ratio (CMRR) is better

DPA DAD6033

Special adapter for an original DPA MicroDot and a 4-pin Hirose connector that connects the DPA's d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to Audio-Technica wireless systems, providing flexible, simple and

DPA DAD6003

Special miniature adapter for a 3-pin Lemo that connects the DPA's d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to Sennheiser, Trantec, Shure, Wisycom wireless systems, providing flexible, simple and

DPA DAD6017

DPA DAD6010

Special original DPA microdot to TA-4F Switchcraft adapter that connects the DPA's d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to adapter for Shure, TOA, PGXI and Line 6 wireless systems, providing flexible,

DPA DAD6032

Special adapter for an original DPA MicroDot and a TA-4F Switchcraft connector that connects the DPA's d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to adapter for Beyerdynamic OPUS wireless systems, providing

Rycote PCS 3/8 Classic Boom Connector

The PCS-Boom Connector is an incredibly convenient and efficient way to simplify and speed-up the fitting and removal of any accessory to a 3/8″ male threaded boom pole. And, importantly, it provides a completely secure and silent connection during use!A range of optional attachment products are

DPA DAD6034 - Sennheiser Evolution/G2/G3/D1, X2 Digital Wireless, Audio Ltd En2 TX

Adapter that connects the d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to Sennheiser Evolution/G2/G3/D1, X2 Digital Wireless, Audio Ltd En2 TX wireless systems. The adapter comes with an original DPA MicroDot

Shimano FD-R7150 Front Di2 Brazed-On Front Derailleur

Di2 brings precise, coordinated front shifting to SHIMANO 105SHIMANO Di2 electronic shifting lets you change from the big to small chainrings, or vice versa, whenever you like while minimizing the risk of a dropped chain. Similarly, you can perform rear shifts without the need to trim the front

AKG MDA5 AT

Adapter for Audio-Technica. The MDA5 AT adapter connector links every AKG Microlite microphone with an Audio-Technica bodypack transmitter with 4-pin locking connector. | Made in: China

AKG MDA1

Adapter XLR female. The MDA1 adapter connector links every AKG MicroLite microphone with an AKG bodypack transmitter with 3-pin Mini-XLR input. | Made in: China

SRAM Battery

The SRAM battery is the power source for eTap® or AXS™ components. The same power unit is interchangeable between front and rear eTap® AXS™ derailleurs, Eagle AXS™ derailleurs, and the RockShox Reverb AXS™ seatpost. |   | FEATURES | | Charges in 60 minutes or less | Lightweight (24 g) and

AKG MDAi CPA Mic Adapter XLR Connector

PA microphone adapter that allows any dynamic vocal microphone to instantly become part of the HARMAN Connected PA system. Simply attach the device to any input of the Soundcraft Ui24r mixer and then plug-in the dynamic microphone and microphone cable for automatic recognition with the HARMAN

Oehlbach Fusion Banana for Loudspeaker

Premium banana connectors for assembling the innovative Oehlbach FUSION loudspeaker cable or comparable high-quality loudspeaker cables. The plugs enable optimum and convenient connection of speaker cables to speakers and electronic components, such as AV receivers and amplifiers. The particularly

IMG Stage Line EMA-300P

Phantom power supply adapterFor connecting ECM-300B, ECM-300L and other microphones with 3-pole mini XLR connector to a mixer with 48 V phantom powerMini XLR plug and XLR plug, 3 poles | Made in: Taiwan

Rode VXLR PRO

The RØDE VXLR Pro is a female TRS mini-jack to male XLR adaptor for connecting RØDE microphones with a 3.5mm output to devices with an XLR input. It utilises an internal transformer to convert an unbalanced signal to a balanced signal, making it ideal for connecting a microphone with an

Inakustik Excellence BFA Banana

Suitable for cable cross-sections of up to 6.0 mm². Meets the strict requirements of the BFA standard (British Federation of Audio). red/black coding. With screw connections. | Type-B Connector: Banana | Connector Material: Gold plated | Variant: 2 pcs | Type-A Connector: Banana | Package Quantity (pcs):

Oehlbach CJG 66 11,0mm? Gold 4 pcs

Connector for the assembly of interconnect cables, 24 ct. gold plated, suitable for cable diameter up to 11 mm. | Variant: 4 pcs | Type: Analog | Connector Material: Gold plated | Made in: Germany | Wired Diameter: 11 mm | Package Quantity (pcs): 4 | Type-A Connector: RCA Cinch Male | Colour: Gold

Monacor XLR-703JSM XLR Connector

Shock-mount base with XLR socket. Attenuation of impact noise and structure-borne noise due to rubber-cushioned 3-pole XLR socket. 1.2 m connection cable with 3-pole XLR plug. Description: base, Colour: black, Weight: 183 g, Connections: 1.2 m, cable with 3-pole XLR jack | Made in: Philippines

AudioQuest HDMI-IN to DVI-OUT

HDMI standards and capabilities have improved significantly since DVI first evolved into HDMI. All generations are backward compatible. However, not all previous HDMI cables can transmit the full 18Gbps of data required to optimize today’s HDMI 2.0 equipment. While there is currently no 4K/60

Inakustik Excellence BFA Banana Red Black 4pcs

Suitable for cable cross-sections of up to 6.0 mm². Meets the strict requirements of the BFA standard (British Federation of Audio). red/black coding. With screw connections. | Connector Angle: Straight - Straight | Type: Analog | Type-B Connector: Banana | Colour: Black;Red | Made in: Germany | Original

Oehlbach CJK 51 CC Cinch Coupling

High-quality cinch coupling for audio- or video-cinch cable assembly. The innovative design of the contact-surface areas means that this Oehlbach cinch plug always creates reliable connections to the connected electronic components – irrespective of whether these components are AV receivers,

Rode MiCon-5

The RODE MiConTM connector system provides seamless integration between the RODE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-5 is designed to connect to a standard 3 pin XLR, with P48 phantom power. Dimensions: 61,8 x 30,1 x 21 mm. Weight: 50 g. | Made

MiPro MJ-53

Condenser microphone adaptor that enables a condenser microphone with mini XLR plug to connect directly to the XLR jack input of a mixer which provides 12–48V DC phantom power. The high output impedance of a condenser microphone will be transformed to low output impedance at about 200 Ohms. The

Ibanez PA01K5L JACK Connector 6,3 mm

High quality instrument patch cable kit. Set includes cable with 1,5 m legth and 6 angled plugs with 6,3 mm Jack connector. Cables are finished in PVC. Connectors: 6 x angled. Length: 1,5 m. Color: Black. | Made in: China

Oehlbach CJG 51 5,5mm Gold 4 pcs

Massive and contact strong RCA plug for self-assembly. You can easily solder a suitable cable to this high-quality RCA plug. The plug is to be taken apart for this purpose, including the spring - which serves as bend protection. You can use the plug to assemble subwoofer, digital but also analog

Eagle Cable Banana Luxury 4 pcs

High-quality banana plugs for connecting speaker cables. Suitable for cable cross-sections of up to 16.0 mm². The spliced pins provide a perfect hold in the socket. With screw connections and 24k gold-plated contacts. Red/black coding. | Made in: China | Material: Copper | Package Quantity (pcs):

AudioQuest Dragon Tail for Android OTG Cable with USB C

Connects a USB-C Output Smartphone or Computer to a DragonFly DAC. Low jitter and low noise preserve clarity, warmth, and dynamics.• Semi-Solid 5% Silver Conductors• Direction Controlled for Lower RF Noise | Colour: Black | Package Quantity (pcs): 1 | Made in: China | Type-A Connector: USB C | Type-B

AudioQuest Dragon Tail for Android OTG Cable with USB Micro

The DragonTail USB adaptor activates USB Host Mode on most Android devices, allowing the devices to transmit USB digital audio to an outboard digital-to-analog converter (DAC). Using DragonTail to connect to an external USB DAC, such as an AudioQuest DragonFly, will provide greatly improved audio

AudioQuest Splitter FLX-Mini/RCA

Added flexibility for when a headphone (3.5mm) output requires a flexible extension of 15 cm to a pair of female RCA connectors, allowing for the use of a pre-existing set of RCA interconnects. Male stereo 3.5 mm. to 2 x Female RCA. Metal: Solid PSC+. Length: 15 cm. | Colour: White | Made in:

AudioQuest Splitter FLX-Mini

This Male stereo (3.5 mm.) plug splits to 2 x Female (3.5 mm) jacks for shared stereo output. The metal used is Solid Perfect Surface Copper+ (PSC+). Length: 15 cm. | Connector Angle: Straight - Straight | Colour: White | Made in: China | Type: Analog | Type-B Connector: Jack STEREO 3,5 mm Female | Type-A

AudioQuest Dragon Tail USB-2,0 Extender

DragonTail is a USB extender for use when a USB device (such as AQ’s DragonFly or a flash drive) is too large to fit next to other occupied computer ports. DragonTail’s flexibility also makes it safer to use USB devices on airplanes and in other mobile environments. Using DragonTail to connect

RockBoard CAB-PW-PLUG-6-GD JACK Connector 6,3 mm

Plugs set for PatchWorks solderless patch cable system. Cable set features the first genuine 2-directional 2-piece solderless plug design on the market designed and developed in Germany. They will always offer the plug orientation you need, since you can easily flip them from straight to angled or

Rode MiCon-4

The RODE MiConTM connector system provides seamless integration between the RODE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-4 is designed to connect to Audio Technica UniPakTM Body-Pack transmitters 1800, 2000 and 3000. Dimensions: 36 x 11,6 x 11,6

Prodipe Devolter 21

Step-down adapter 5 Volts XLR/Mini XLR Series 21 | Type-B Connector: XLR mini Male | Connector Angle: Straight - Straight | Package Contents: XLR-XLR Mini Reduction | Type-A Connector: XLR Male | Type: Reduction | Made in: China

Rode VXLR+

Transforming Adapter. Quality adapter transforms phantom power for use with your on-camera or headset mic. Steps 12V-48V XLR-supplied power down to gear-compatible 3V-5V ''plug-in power''. Works with the threaded locking connector on the Rode HS2 and the RodeLink Filmmaker Kit Lavalier. Connector

Klotz AYS-3 Y

Cable type Y, 1 x jack 3.5 mm M - 2 x jack 6.35 mm F. Very lightweight, durable, with gold plated connectors. Splits a stereo signal into two channels. Weight: 0.095 kg. Lenght: 0.2 m. Colour: Black and red. | Made in: Germany

TIE TXLRD3

Phantom power adapter for connecting TIE instrument and other microphones with 3-pin mini XLR connection to a mixer or audio interfaces with 48 volt phantom power. | Type-A Connector: XLR Male | Type: Reduction | Type-B Connector: XLR mini Male | Made in: China

RockBoard CAB-PW-PLUG-6-CR JACK Connector 6,3 mm

Plugs set for PatchWorks solderless patch cable system. Cable set features the first genuine 2-directional 2-piece solderless plug design on the market designed and developed in Germany. They will always offer the plug orientation you need, since you can easily flip them from straight to angled or

Klotz AYS-5

Cable flexible short Y adapter. Used to split stereo signals into left and right channel. | Made in: China

Shure WA-330 MINI XLR Connector

4pin miniconnector adapts a smalldiameter microphone cable to a bodypack transmitter

TC Electronic Teleport GLT

TELEPORT GLT is the transmitter component of the TELEPORT High-Performance Active Guitar Signal Long Cable Run System. Engineered to convert your guitar's output to a balanced low-impedance (Lo-Z) signal, GLT can easily transmit over distances of up to 100 m with absolutely zero signal loss –

Sommer Cable Hicon HI-HDHD-FFDN

HICON HDMI, 19-pol, metal-, patch-female connector with gold plated contacts, Type D, nickel coloured. | Connector Angle: Straight | Colour: Silver | Made in: Germany | Type: Digital | Connector Material: Gold plated | Original Colour by Producer: Nickel | Type-A Connector: HDMI Female | Package Quantity (pcs): 1

Neutrik NA4FX-F

SpeakON NL4FX - 3 pole XLR female. Versatile, pre-wired and ready to use adapters to reliably interlock various connector systems. Professional look and compact space saving design, based on the X Series (XLR worldwide accepted standard). Rugged diecast shell for best reliability. | Made in: China

Klotz AYB-2 Y

Cable type Y, 1 x jack 6.35 mm M - 2 x jack 3.5 mm F. Very lightweight, durable, with gold plated connectors. Distributes a stereo signal to two stereo channels. Weight: 00535 kg. Lenght: 0.2 m. Colour: Black | Made in: Germany

Rode MiCon-7

The RODE MiConTM connector system provides seamless integration between the RODE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-7 is designed to connect to Lectrosonics transmitters SM Series, UMa Series, LMa Series and UM450. Dimensions: 36 x 13 x 10,5

Rode MiCon-10

The RODE MiConTM connector system provides seamless integration between the RODE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-10 is designed to connect to MIPRO transmitters with 4-pin mini XLR connector. Dimensions: 36 x 13,6 x 10,4 mm. Weight: 10

Rode MiCon-6

The RODE MiConTM connector system provides seamless integration between the RODE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-6 is designed to connect to AKG transmitters PT40, PT60, PT61, PT80, PT400, PT2000 and PT4000, as well as the Audix RAD-360

Monacor BP-420 JACK Connector 6,3 mm

Pair of speaker pole terminals. Nickel-plated version. To be screwed and plugged. For wooden cabinets up to 25 mm. Uninsulated | Made in: Taiwan

Neutrik NA4FX-M

SpeakON NL4FX - 3 pole XLR male adapter. Versatile, pre-wired and ready to use adapters to reliably interlock various connector systems. Professional look and compact space saving design, based on the X Series (XLR worldwide accepted standard). Rugged diecast shell for best reliability. | Made in:

Oehlbach i-Connect Split

This i-Connect Y-adapter can be used to connect two sets of headphones to a portable media player. The adapter is equipped with a 3.5 mm jack on one side and two 3.5 mm jack sockets on the other. High quality metal connectors with 24 carat gold-plated contact surfaces provide maximum transmission

AudioQuest USB Mini-to-Micro Adaptor

Connects USB Mini to USB Micro devices. Enables charging and data transfer (syncing). USB 2.0 and 3.0 compatible. Compact, durable design for secure connections and long- lasting performance. | Connector Angle: Straight - Straight | Made in: China | Type-B Connector: micro USB | Type: Digital | Type-A

AudioQuest USB B-to-Micro 2,0 Adaptor

If you have a standard USB A-to-B cable but the device to which you want to connect requires a Micro-USB connector, this adaptor will allow you to bridge the connection and preserve audio performance. | Type-B Connector: micro USB | Made in: China | Colour: Black | Type: Digital | Connector Angle: Straight -

BOYA 35C-XLR Pro

The BOYA 35C-XLR Pro Adapter converts 3.5mm mini jack input to a male XLR output. It allows you to connect a microphone with a mini jack output to a professional mixing desk, camera, or other device with an XLR input. | Made in: China | Type-B Connector: Jack TRS 3,5 mm Female | Type: Reduction | Connector

Neutrik NP2X-AU-SILENT JACK Connector 6,3 mm

Professional 2pole straight 1/4” phone connector from silentPLUG series that was designed specifically for guitar applications and automatically mutes a guitar cable to avoid pops and squeaks when changing the guitar under load. It features an integrated silent switch based on REEDtechnology with

Source Audio SA 157 Neuro Coupler Set

Connectors for Source Audio One Series pedals- 6.3 mm (1/4) straight jack plugs- set includes 1 x TRS (stereo) + 1 x TS (mono) connector- allows for simultaneous transfer of Neuro Mobile App messages and stereo audio signals to the entire One Series chain of pedals. | Type: Adapter | Made in:

Klotz AYB-1 Y

Cable type Y, 1 x jack 6.35 mm M - 2 x jack 6.35 mm F. Very lightweight, durable, with gold plated connectors. Distributes a stereo signal to two stereo channels. Weight: 0.1 kg. Lenght: 0.2 m. Colour: Black | Made in: Germany

D'Addario Planet Waves PW-P047B

1/4' Male Mono Offset Adapter. Offset adapter gives you a highquality solution to common cabling situations. Use it to connect your guitar or bass effects pedals with a minimum of cabling, or to turn a female TS connection into a male one. The Planet Waves PWP047B, like all Planet Waves adapters,

Enova SP24FN SPEAKON Connector

4-pole loudspeaker connection with a robust metal housing female. Max. Current of 40 amps. | Material: Zinc | Connector Angle: Straight | Type-A Connector: Speakon Male | Colour: Grey | Made in: China

D'Addario Planet Waves PW-P047C

Connector, adapter 3,5mm to RCA | Made in: USA | Type-B Connector: RCA Cinch Female | Connector Angle: Straight - Straight | Type-A Connector: Jack STEREO 3,5 mm Male

D'Addario Planet Waves PW-P047BB

XLR Female to 1/4' Female Adapter. A handy adapter when adapting from XLR to 1/4' stereo cables. | Made in: USA

D'Addario Planet Waves PW-P047Z

Adapter for mono cables with Jack 6,3mm connectors. Adapter can be used to transform Jack 6,3 mm Male connector to XLR Male connector. Connectors: 1x Jack 6,3mm Female mono, 1 x XLR 3 pin male. Color: Black. | Made in: China

D'Addario Planet Waves PW-AGRAP-1 JACK Connector 6,3 mm

Guitar Cable, 1/4' Angled TS Male - 1/4' TS Male, 20' Long. Check out the Circuit Breaker guitar cables from Planet Waves! Guitarists, we're sure you're familiar with the nasty sound your amp makes when you unplug the cable from the guitar without turning the amp off or going into standby mode. You

Enova SP24MN SPEAKON Connector

4-pole loudspeaker connection with a robust metal housing male. Max. Current of 40 amps. | Made in: China | Colour: Grey | Connector Angle: Straight | Type-A Connector: Speakon Female | Material: Zinc

BOYA 35C-XLR

The BOYA 35C-XLR Adapter converts 3.5mm mini jack input to a male XLR output, it allows you to connect a microphone with a mini jack output to a professional mixer, camera, or other device with an XLR input. | Type-B Connector: Jack STEREO 3,5 mm Female | Made in: China | Type: Reduction | Type-A

Prodipe AD-AL21-TA4F

Cable adapter Prodipe AL212 x Mini XLR x Mini XLR Cable. | Made in: China | Type: Adapter | Type-A Connector: Mini XLR | Type-B Connector: TA4F | Connector Angle: Straight - Straight

Bespeco SLAD380

Stereo 3.5 mm jack male plug to two RCA female sockets adapter connector from SILOS series. Black and orange colour combination. | Connector Angle: Straight - Straight | Made in: China | Type-A Connector: Jack STEREO 3,5 mm Male | Type: Reduction | Type-B Connector: RCA Cinch Female

Monacor XLR-307/P MINI XLR Connector

Miniature XLR plug with 3 poles, gold-plated contacts, metal housing and cable bending protection. For cables: Ø 3.5 mm, Colour/colour coding: black, chrome, Admiss. ambient temp.: 0-40 °C, Weight: 7 g | Made in: Taiwan