AKG MDA1

AKG MDA1

Adapter XLR female. The MDA1 adapter connector links every AKG MicroLite microphone with an AKG bodypack transmitter with 3-pin Mini-XLR input. | Made in: China

AKG MDA5 AT

Adapter for Audio-Technica. The MDA5 AT adapter connector links every AKG Microlite microphone with an Audio-Technica bodypack transmitter with 4-pin locking connector. | Made in: China

AKG MDAi CPA Mic Adapter XLR Connector

PA microphone adapter that allows any dynamic vocal microphone to instantly become part of the HARMAN Connected PA system. Simply attach the device to any input of the Soundcraft Ui24r mixer and then plug-in the dynamic microphone and microphone cable for automatic recognition with the HARMAN

Shure WA-330 MINI XLR Connector

4pin miniconnector adapts a smalldiameter microphone cable to a bodypack transmitter

AKG MK/GL-WMS

Cable adapter with TQG to 6.3 mm jack connectors. Instrument cable for PT pocket transmitters. Length 114 cm. Color: Black. | Length: 110 cm | Made in: China | Colour: Black | ~ Length: 1 m

DPA DAD6032

Special adapter for an original DPA MicroDot and a TA-4F Switchcraft connector that connects the DPA's d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to adapter for Beyerdynamic OPUS wireless systems, providing

DPA DAD6021

Special adapter for an original DPA MicroDot and TA-5F connector that is ideal for normal sound pressure level (0 dB attenuation) and connects the DPA's d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to

DPA DAD6033

Special adapter for an original DPA MicroDot and a 4-pin Hirose connector that connects the DPA's d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to Audio-Technica wireless systems, providing flexible, simple and

TIE TXLRD3

Phantom power adapter for connecting TIE instrument and other microphones with 3-pin mini XLR connection to a mixer or audio interfaces with 48 volt phantom power. | Made in: China | Type-A Connector: XLR Male | Type: Reduction | Type-B Connector: XLR mini Male

DPA DAD6001-BC

Adapter for powering Miniature Microphones via standard P48 phantom power. Designed for use with miniature microphones from DPA. Belt clip is included. This adapter is active-signal balanced, which improves suppression of induced electromagnetic noise. Common Mode Rejection Ratio (CMRR) is better

DPA DAD6003

Special miniature adapter for a 3-pin Lemo that connects the DPA's d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to Sennheiser, Trantec, Shure, Wisycom wireless systems, providing flexible, simple and

DPA DAD6010

Special original DPA microdot to TA-4F Switchcraft adapter that connects the DPA's d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to adapter for Shure, TOA, PGXI and Line 6 wireless systems, providing flexible,

AKG MPAVL Black 50 cm

Phantom Power Adapter with integrated switchable bass roll-off switch. Cable adapter is compatibile with C519, C518 and C516 models from the L-Type Series and all models from 500X series. Legth: 50 cm. Color: Black | ~ Length: 0 m;1 m | Made in: China | Length: 50 cm | Colour: Black | Type-B Connector:

Rode VXLR PRO

The RØDE VXLR Pro is a female TRS mini-jack to male XLR adaptor for connecting RØDE microphones with a 3.5mm output to devices with an XLR input. It utilises an internal transformer to convert an unbalanced signal to a balanced signal, making it ideal for connecting a microphone with an

DPA DAD6017

BOYA BY-BCA7

The BOYA BY-BCA7 is a Microphone Cable with Lightning connector for iOS devices (iPhone, iPod touch, iPad). It allows for up to 24bit/48kHz, integrating pre-amplier, connecting XLR dynamic microphone and XLR battery powered condenser microphone with iOS equipment. It provides a 3.5mm (1/8') stereo

DPA DAD6034 - Sennheiser Evolution/G2/G3/D1, X2 Digital Wireless, Audio Ltd En2 TX

Adapter that connects the d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to Sennheiser Evolution/G2/G3/D1, X2 Digital Wireless, Audio Ltd En2 TX wireless systems. The adapter comes with an original DPA MicroDot

Bespeco SK087

XLR female socket to RCA socket adapter connector. | Made in: China | Type-A Connector: RCA Cinch Female | Type-B Connector: XLR Female

Prodipe AD-AL21-TA4F

Cable adapter Prodipe AL212 x Mini XLR x Mini XLR Cable. | Type-B Connector: TA4F | Connector Angle: Straight - Straight | Made in: China | Type-A Connector: Mini XLR | Type: Adapter

AKG EK 300 Headphone Cable

Headphone cable with a length of 3 meters, mini Jack connector, mini XLR connector for connection to headphones. | Compatible with: K240;K271; K141;K171 | Microphone: No | Original Colour by Producer: Black | Made in: China | Length: 3 m | ~ Length: 3 m | Cable Length: 3 m | Colour: Black | Type-B Connector: Mini

Oehlbach Fusion Banana for Loudspeaker

Premium banana connectors for assembling the innovative Oehlbach FUSION loudspeaker cable or comparable high-quality loudspeaker cables. The plugs enable optimum and convenient connection of speaker cables to speakers and electronic components, such as AV receivers and amplifiers. The particularly

D'Addario Planet Waves PW-P047Z

Adapter for mono cables with Jack 6,3mm connectors. Adapter can be used to transform Jack 6,3 mm Male connector to XLR Male connector. Connectors: 1x Jack 6,3mm Female mono, 1 x XLR 3 pin male. Color: Black. | Made in: China

D'Addario Planet Waves PW-P047T

Coupler adapter for instrument stereo cables with Stereo Jack 6,3mm connectors. Coupler can be used to extend short cables. Connectors: 2x Jack 6,3mm Female Stereo. Color: Black. | Made in: USA

Bespeco ADKW

Eccentric adapter connector with two mono 6.3 mm jack plugs. | Made in: China