Bilge Pumps - 44 to choose from

Unimer Drainman MKII Bilge Pump

Bilge pump with neoprene cover. It is practical, easy to install and secure, made of solid materials and resists forces up to 15,000 Newtons. The pump operates continuously and can pump up to 100 liters of water in 24 hours. Suction height is 8.2 m. The water is pumped through a hose located at the

£ 19,60

Talamex Bilge Pump 35 cm

Manual bilge pump manufactured from oil and petrol resistant plastic. Color: blue/orange. In-and outlet Ø 20 mm. Length – 35 cm. Includes drain hose. | Made in: Italy | Voltage: Neuvedené

£ 21,70

Talamex Bilge Pump 55 cm

Manual bilge pump manufactured from oil and petrol resistant plastic. Color: blue/orange. In-and outlet Ø 20 mm. Length – 55 cm. Includes drain hose. | Made in: Italy | Voltage: Neuvedené

£ 83,60

Whale SS 650 Automatic Bilge Pump

Low profile automatic pump for confined bilge spaces. Built-in field sensor switch, no maintenance required. Excellent operation even in case of dirt, oil, fuel, etc. Easy access to strainer. Capacity - 40 l / min, hose diameter - 19 mm, voltage - 12 V. | Voltage: 12 V | Made in: United Kingdom

£ 150,00

Whale SS 1100 Automatic Bilge Pump

Low profile automatic pump for confined bilge spaces. Built-in field sensor switch, no maintenance required. Excellent operation even in case of dirt, oil, fuel, etc. Easy access to strainer. Capacity - 69 l / min, hose diameter - 25 mm, voltage - 12 V. | Voltage: 12 V | Made in: United Kingdom

£ 193,00

Rule Mate 1100 Automatic - Bilge Pump

Fully automatic bilge pump. Switch on when the water reaches a height of | 60 mm, when the water is depleted, the pump automatically turns off. | Unique sensor technology ensures that the pump only switches on when it | is in contact with water, and the pump does not switch on when it comes | to oil -

£ 114,00

Rule Mate 500 Automatic - Bilge Pump

Fully automatic bilge pump. Switch on when the water reaches a height of 60 mm, when the water is depleted, the pump automatically turns off. Unique sensor technology ensures that the pump only switches on when it is in contact with water, and the pump does not switch on when it comes to oil - it

£ 220,00

Rule 2000 24V - Bilge Pump

24 V Bilge pump for connecting a 28 mm hose. For medium sized yachts and | motor boats. tough plastic body with integral strainer. The quick | release inlet strainer allows rapid cleaning. For automatic operation | use Rule Float Switches. Integrated ignition protection. Features: Fuse | size: 10

£ 145,00

Marco UP3700 Bilge pump 230 l/min

£ 19,70

Osculati Extra-Flat automatic switch for any bilge pump

Eco-friendly automatic switch for any bilge pump, Extra-flat version. CE certified in compliance with Law 94/25, ISO 28846 standards. | Voltage: Neuvedené | Made in: Italy

£ 55,40

Rule 1100 (27DA) 12V - bilge pump

12 V Bilge pump for connecting a 25 mm and 28 mm hose. For medium sized yachts and motor boats. tough plastic body with integral strainer. The quick release inlet strainer allows rapid cleaning. For automatic operation use Rule Float Switches. Integrated ignition protection. Features: Fuse size: 6

£ 36,60

Marco UP500 Bilge pump 32 l/min - 24V

24 V completely submersible bilge pump . Compact design with corrosion resistant ABS material body, which clips on and off for easy inspection and cleaning. For use with fresh or salt water, ideal for use on boats and marinas. | | | Dimensions: Ø 59x94,5 mm | Fuse: 3 A | Volumetric Flow: 32 l/min | Power

£ 46,30

Marco UP1000 Bilge pump 63 l/min - 24V

£ 65,90

Marco UP1500 Bilge pump 95 l/min - 12V

£ 60,40

Marco UP1500 Bilge pump 95 l/min - 24V

£ 105,00

Marco UP2000 Bilge pump 126 l/min - 12V

£ 81,40

Marco UP2000 Bilge pump 126 l/min - 24V

£ 210,00

Rule 2000 (10) 12V Bilge Pump Non-Automatic

12 V Bilge pump for connecting a 28 mm hose. For medium sized yachts and motor boats. tough plastic body with integral strainer. The quick release inlet strainer allows rapid cleaning. For automatic operation use Rule Float Switches. Integrated ignition protection.FeaturesFuse size: 15

£ 78,20

Rule Mate RM-500A 24V

Automatic bilge pump is suitable for medium-big boats. The pump provides a special switch that check every 5 minutes the bilge water level. When the float rises, the pump begins to turn on. It will delay it's activation for two seconds, thus eliminating any false starts. When the float drops and

£ 157,00

Rule Mate 800 Submersible

Rule Mate 800 Submersible is fully automated bilge compact pump for smaller vessels with integral sensor. Air Vents in the body to help prevent air locks in challenging installations. Back up feature prevent dry running if sensor is fouled, pump reverts to 2.5 minute cycle mode. | Voltage: 12 V | Made

£ 24,80

Marco AS3 Automatic Float Switch For Bilge Pumps - Heavy Duty

Automatic float switch for bilge pumps. Max amperage - 20 (12 V) - 10 (24 V) , OFF-ON – 19-51 mm, Cable length - 900 mm, Dimensions – 127 x 842 x 110 mm. | Made in: Italy | Voltage: 12 / 24 V | Dimensions: 127 x 42 x 110 mm

£ 15,20

Nuova Rade Automatic Flotter Switch 12V/15A

This float switch is designed for the automatic control of electrically driven bilge pumps. Designed with a reliable rolling-ball and switch system that prevents rapid on/off cycling found on some switches and is safer than mercury switches. When water lifts the chamber buoy up to 6cm, the switch

£ 193,00

Rule Mate 1100 Automatic - Bilge Pump

Fully automatic bilge pump. Switch on when the water reaches a height of | 60 mm, when the water is depleted, the pump automatically turns off. | Unique sensor technology ensures that the pump only switches on when it | is in contact with water, and the pump does not switch on when it comes | to oil -

£ 153,00

Rule Automatic 800 12V 3000 L

Powerful bilge pump made of sturdy plastic and is ideal for smaller boats due to its lightweight and compact design. The inlet strainer of the pump can be removed very easily, allowing for fast and thorough cleaning. The check valve prevents backflow of water into the bilge. Due to its low

£ 29,10

Marco UP500 Bilge pump 32 l/min - 12V

The low voltage – 12v completely submersible bilge pump . Compact design with corrosion resistant ABS material body, which clips on and off for easy inspection and cleaning. For use with fresh or salt water, ideal for use on boats and marinas. | | | Fuse: 5 A | Dimensions: Ø 59x94,5 mm | Weight: 0,5

£ 47,30

Marco UP1000 Bilge pump 63 l/min - 12V

£ 191,00

Rule 1100 Automatic 27S 12V - Bilge Pump

12 V Bilge pump for connecting a 25 mm and 28 mm hose. For medium sized | yachts and motor boats. tough plastic body with integral strainer. The | quick release inlet strainer allows rapid cleaning. For automatic | operation use Rule Float Switches. Integrated ignition protection. | Features: Fuse

£ 34,90

Osculati Europump II Automatic Bilge Pump G750

Very compact, with built-in electronic level sensor. ABS body, stainless steel shaft. Reduced current draw. Removable from plug-in base. CE certified by RINA in compliance with Law 94/25, directive ISO 28846/28849.Current draw 3 AHead 3 mHose adaptor (Ø A) 19 mm | Made in: China | Voltage: 12

£ 32,80

Whale Service kit MK3

Repair kit for foot pump. | Voltage: Neuvedené | Made in: China

£ 109,00

Rule LP900S LoPro Automatic Bilge Pump 12V

Submersible pump 12 volt DCConnections: For 19 mm (3/4''), 25 mm (1'') or 28 mm (1 1/8'') bore hoseDimensions: 237 mm long, 59 mm diameterCurrent Draw: 4 AFuse Size: 7.5 AOutput: Up to 56 litres / minute (12.5 gallons / minute). Max. recommended discharge head 3 mBrings Rule pumping power to tight

£ 31,90

Jabsco Bilge Pump Inlet Strainer 46400-0000

Inlet Strainer for bilge pump Jabsco. Prevents unnecessary pump breakdowns caused by particles in the water. Transparent housing allows instant inspection. Screw off top allows quick in-place cleaning and removal of debris. Dimensions: 120mm long, 70mm wide, 60mm high. Connections: 19mm (3/4'') ID

£ 83,00

Quick Sensor Bilge switch 9-31V 10A

• Operation by microcontroller.• Advanced digital filter to detect the presence of water.• Remote indication of operation status by led.• Manual remote pump switch-on by button.• Signal for prolonged bilge pump switch on (if led is installed).• Protection against excessive battery

£ 85,50

Quick Sensor Bilge switch 9-31V 15A

• Operation by microcontroller.• Advanced digital filter to detect the presence of water.• Remote indication of operation status by led.• Manual remote pump switch-on by button.• Signal for prolonged bilge pump switch on (if led is installed).• Protection against excessive battery

£ 87,10

Quick Sensor Bilge switch 9-31V 20A

• Operation by microcontroller.• Advanced digital filter to detect the presence of water.• Remote indication of operation status by led.• Manual remote pump switch-on by button.• Signal for prolonged bilge pump switch on (if led is installed).• Protection against excessive battery

£ 121,00

Whale MK3 Gusher - foot pump

Foot Water Pump - A simple solution for water supply in small kitchens. A low-cost freshwater system for faucets and showers. Ideal for use as a backup pump for electrical systems. Suitable for pumping fresh and sea water. Multiple directional inputs and hose outputs facilitate installation. Three

£ 225,00

Whale Gulper pump 320 24V

Built on market leading valve technology, it is as reliable as the Gulper 220 but with a 35% higher flow. Improved features in comparison with the 220 model: 1)Patented Ezi-Clamp locking ring: head rotates 360° without loosing screws. 2) 3-foot design for quick and easy installation

£ 47,90

Whale MK2 Baby Foot - self-priming foot pump

Compact , low-cost, self-priming freshwater foot pump. Easy to install and useful in restricted spaces. Angled foot operation for more comfortable pumping. Can be used to prime Whale in-line booster pumps. Flow rate - 8 l / min, for hoses 13 mm in diameter. | Made in: China | Voltage: Neuvedené

£ 157,00

Rule Mate 800 Submersible

Rule Mate 800 Submersible is fully automated bilge compact pump for smaller vessels with integral sensor. Air Vents in the body to help prevent air locks in challenging installations. Back up feature prevent dry running if sensor is fouled, pump reverts to 2.5 minute cycle mode. | Made in:

£ 70,30

Attwood Sahara MK2 S500

Features: | | Patented X-Air™ Impeller: Prevents air locking so thatthe pump will not run dry and burn out. | Flexible Outlets | Single - Hand Pump Cartridge Release | Exterior Mounting Feet: Eliminates the need to remove thebasket | No Pipe or Hose Removal Required: Reduces the time that it takes to

£ 279,00

Rule 3800 (17A) 12V

General purpose high flow, low head centrifugal pump. Connections: 38 mm bore hose. Fuse size: 25 A, Output: up to 220 litre/minute, Max. ecommended discharge head - 3 m, Tough plastic body, Quiet and Efficient. Weight: 2.89 kg. Dimension: 210 x 165 x 165 mm. | Made in: China | Voltage: 12 V

£ 366,00

Jabsco 37202-2012 Self-priming diaphragm pump 12 volt

Self-priming diaphragm pump. Connections for 19 mm bore hose, Fuse Size – 10 A, Output - up to 13 l/min. For bilge pumping or shower drain with continuously rated motor with thermal overload protection. Multiple diaphragm design allows extended dry running, Self-primes up to 2.5 m vertical lift,

£ 14,50

Rule EK10710 Bilge Water Alarm Panel

Bilge water alarm panel provides an audible and visual means of warning that water level in your bilge is beyond your bilge pump switch level (not include).Height: 63,5 mmWidth: 82,6 mmSplash water proofedVoltage: 12 V | Voltage: 12 V | Made in: China

£ 17,80

Osculati Piper Pump Vacuum Self-Emptying

Vacuum self-emptying pump made of anodized aluminium, fitted with hose and stainless steel clamp for mounting the hose to the pump, universal size for all outboard engines. | Voltage: Neuvedené | Made in: China

£ 222,00

Whale Gulper pump 320 12V

Built on market leading valve technology, it is as reliable as the Gulper 220 but with a 35% higher flow. Improved features in comparison with the 220 model:Patented Ezi-Clamp locking ring: head rotates 360° without loosing screws.3-foot design for quick and easy installation.Anti-vibration rubber

Bilge Pumps44

Unimer Drainman MKII Bilge Pump

Talamex Bilge Pump 35 cm

Talamex Bilge Pump 55 cm

Whale SS 650 Automatic Bilge Pump

Whale SS 1100 Automatic Bilge Pump

Rule Mate 1100 Automatic - Bilge Pump

Rule Mate 500 Automatic - Bilge Pump

Rule 2000 24V - Bilge Pump

Marco UP3700 Bilge pump 230 l/min

Osculati Extra-Flat automatic switch for any bilge pump

Rule 1100 (27DA) 12V - bilge pump

Marco UP500 Bilge pump 32 l/min - 24V

Marco UP1000 Bilge pump 63 l/min - 24V

Marco UP1500 Bilge pump 95 l/min - 12V

Marco UP1500 Bilge pump 95 l/min - 24V

Marco UP2000 Bilge pump 126 l/min - 12V

Marco UP2000 Bilge pump 126 l/min - 24V

Rule 2000 (10) 12V Bilge Pump Non-Automatic

Rule Mate RM-500A 24V

Rule Mate 800 Submersible

Marco AS3 Automatic Float Switch For Bilge Pumps - Heavy Duty

Nuova Rade Automatic Flotter Switch 12V/15A

Rule Mate 1100 Automatic - Bilge Pump

Rule Automatic 800 12V 3000 L

Marco UP500 Bilge pump 32 l/min - 12V

Marco UP1000 Bilge pump 63 l/min - 12V

Rule 1100 Automatic 27S 12V - Bilge Pump

Osculati Europump II Automatic Bilge Pump G750

Whale Service kit MK3

Rule LP900S LoPro Automatic Bilge Pump 12V

Jabsco Bilge Pump Inlet Strainer 46400-0000

Quick Sensor Bilge switch 9-31V 10A

Quick Sensor Bilge switch 9-31V 15A

Quick Sensor Bilge switch 9-31V 20A

Whale MK3 Gusher - foot pump

Whale Gulper pump 320 24V

Whale MK2 Baby Foot - self-priming foot pump

Rule Mate 800 Submersible

Attwood Sahara MK2 S500

Rule 3800 (17A) 12V

Jabsco 37202-2012 Self-priming diaphragm pump 12 volt

Rule EK10710 Bilge Water Alarm Panel

Osculati Piper Pump Vacuum Self-Emptying

Whale Gulper pump 320 12V

Bilge Pumps - filtering

Bilge Pumps - sorting method

Cookie settings