Features: | | Patented X-Air™ Impeller: Prevents air locking so thatthe pump will not run dry and burn out. | Flexible Outlets | Single - Hand Pump Cartridge Release | Exterior Mounting Feet: Eliminates the need to remove thebasket | No Pipe or Hose Removal Required: Reduces the time that it takes to
Self-priming diaphragm pump. Connections for 19 mm bore hose, Fuse Size – 10 A, Output - up to 13 l/min. For bilge pumping or shower drain with continuously rated motor with thermal overload protection. Multiple diaphragm design allows extended dry running, Self-primes up to 2.5 m vertical lift,
Inlet Strainer for bilge pump Jabsco. Prevents unnecessary pump breakdowns caused by particles in the water. Transparent housing allows instant inspection. Screw off top allows quick in-place cleaning and removal of debris. Dimensions: 120mm long, 70mm wide, 60mm high. Connections: 19mm (3/4'') ID
Automatic float switch for bilge pumps. Max amperage - 20 (12 V) - 10 (24 V) , OFF-ON – 19-51 mm, Cable length - 900 mm, Dimensions – 127 x 842 x 110 mm. | Dimensions: 127 x 42 x 110 mm | Made in: Italy | Voltage: 12 / 24 V
24 V completely submersible bilge pump . Compact design with corrosion | resistant ABS material body, which clips on and off for easy inspection | and cleaning. For use with fresh or salt water, ideal for use on boats | and marinas. | | | Power Consumption: 2 A | Voltage: 24 V | Made in: Italy | Power: 50
12 V completely submersible bilge pump . Compact design with corrosion | resistant ABS material body, which clips on and off for easy inspection | and cleaning. For use with fresh or salt water, ideal for use on boats | and marinas. | Made in: Italy | Weight: 1,5 kg | Power: 120 W | Voltage: 12 V | Power
24 V completely submersible bilge pump . Compact design with corrosion | resistant ABS material body, which clips on and off for easy inspection | and cleaning. For use with fresh or salt water, ideal for use on boats | and marinas. | | | | Power: 120 W | Made in: Italy | Volumetric Flow: 95
12 V completely submersible bilge pump . Compact design with corrosion | resistant ABS material body, which clips on and off for easy inspection | and cleaning. For use with fresh or salt water, ideal for use on boats | and marinas. | | | | Volumetric Flow: 126 l/min | Voltage: 12 V | Hose: 32
24 V completely submersible bilge pump . Compact design with corrosion | resistant ABS material body, which clips on and off for easy inspection | and cleaning. For use with fresh or salt water, ideal for use on boats | and marinas. | Weight: 2 kg | Fuse: 15 A | Made in: Italy | Hose: 32 mm | Dimensions:
24 V completely submersible bilge pump . Compact design with corrosion | resistant ABS material body, which clips on and off for easy inspection | and cleaning. For use with fresh or salt water, ideal for use on boats | and marinas. | | | Power: 200 W | Volumetric Flow: 233 l/min | Voltage: 24 V | Fuse:
24 V completely submersible bilge pump . Compact design with corrosion resistant ABS material body, which clips on and off for easy inspection and cleaning. For use with fresh or salt water, ideal for use on boats and marinas. | | | Power: 30 W | Power Consumption: 1,2 A | Hose: 19 mm | Weight: 0,5
The low voltage – 12v completely submersible bilge pump . Compact design | with corrosion resistant ABS material body, which clips on and off for | easy inspection and cleaning. For use with fresh or salt water, ideal | for use on boats and marinas. | Made in: Italy | Fuse: 10 A | Power Consumption:
The low voltage – 12v completely submersible bilge pump . Compact design with corrosion resistant ABS material body, which clips on and off for easy inspection and cleaning. For use with fresh or salt water, ideal for use on boats and marinas. | | | Fuse: 5 A | Volumetric Flow: 32 l/min | Weight: 0,5
This float switch is designed for the automatic control of electrically driven bilge pumps. Designed with a reliable rolling-ball and switch system that prevents rapid on/off cycling found on some switches and is safer than mercury switches. When water lifts the chamber buoy up to 6cm, the switch
Eco-friendly automatic switch for any bilge pump, Extra-flat version. CE certified in compliance with Law 94/25, ISO 28846 standards. | Voltage: Neuvedené | Made in: Italy
Very compact, with built-in electronic level sensor. ABS body, stainless steel shaft. Reduced current draw. Removable from plug-in base. CE certified by RINA in compliance with Law 94/25, directive ISO 28846/28849.Current draw 3 AHead 3 mHose adaptor (Ø A) 19 mm | Voltage: 12 V | Volumetric Flow: 45
Vacuum self-emptying pump made of anodized aluminium, fitted with hose and stainless steel clamp for mounting the hose to the pump, universal size for all outboard engines. | Voltage: Neuvedené | Made in: China
• Operation by microcontroller.• Advanced digital filter to detect the presence of water.• Remote indication of operation status by led.• Manual remote pump switch-on by button.• Signal for prolonged bilge pump switch on (if led is installed).• Protection against excessive battery
• Operation by microcontroller.• Advanced digital filter to detect the presence of water.• Remote indication of operation status by led.• Manual remote pump switch-on by button.• Signal for prolonged bilge pump switch on (if led is installed).• Protection against excessive battery
• Operation by microcontroller.• Advanced digital filter to detect the presence of water.• Remote indication of operation status by led.• Manual remote pump switch-on by button.• Signal for prolonged bilge pump switch on (if led is installed).• Protection against excessive battery
12 V Bilge pump for connecting a 25 mm and 28 mm hose. For medium sized yachts and motor boats. tough plastic body with integral strainer. The quick release inlet strainer allows rapid cleaning. For automatic operation use Rule Float Switches. Integrated ignition protection. Features: Fuse size: 6
12 V Bilge pump for connecting a 28 mm hose. For medium sized yachts and motor boats. tough plastic body with integral strainer. The quick release inlet strainer allows rapid cleaning. For automatic operation use Rule Float Switches. Integrated ignition protection.FeaturesFuse size: 15
24 V Bilge pump for connecting a 28 mm hose. For medium sized yachts and | motor boats. tough plastic body with integral strainer. The quick | release inlet strainer allows rapid cleaning. For automatic operation | use Rule Float Switches. Integrated ignition protection. Features: Fuse | size: 10
General purpose high flow, low head centrifugal pump. Connections: 38 mm bore hose. Fuse size: 25 A, Output: up to 220 litre/minute, Max. ecommended discharge head - 3 m, Tough plastic body, Quiet and Efficient. Weight: 2.89 kg. Dimension: 210 x 165 x 165 mm. | Made in: China | Voltage: 12 V
Powerful bilge pump made of sturdy plastic and is ideal for smaller boats due to its lightweight and compact design. The inlet strainer of the pump can be removed very easily, allowing for fast and thorough cleaning. The check valve prevents backflow of water into the bilge. Due to its low
Submersible pump 12 volt DCConnections: For 19 mm (3/4''), 25 mm (1'') or 28 mm (1 1/8'') bore hoseDimensions: 237 mm long, 59 mm diameterCurrent Draw: 4 AFuse Size: 7.5 AOutput: Up to 56 litres / minute (12.5 gallons / minute). Max. recommended discharge head 3 mBrings Rule pumping power to tight
Fully automatic bilge pump. Switch on when the water reaches a height of 60 mm, when the water is depleted, the pump automatically turns off. Unique sensor technology ensures that the pump only switches on when it is in contact with water, and the pump does not switch on when it comes to oil - it
Rule Mate 800 Submersible is fully automated bilge compact pump for smaller vessels with integral sensor. Air Vents in the body to help prevent air locks in challenging installations. Back up feature prevent dry running if sensor is fouled, pump reverts to 2.5 minute cycle mode. | Voltage: 12 V | Made
Automatic bilge pump is suitable for medium-big boats. The pump provides a special switch that check every 5 minutes the bilge water level. When the float rises, the pump begins to turn on. It will delay it's activation for two seconds, thus eliminating any false starts. When the float drops and
12 V Bilge pump for connecting a 25 mm and 28 mm hose. For medium sized | yachts and motor boats. tough plastic body with integral strainer. The | quick release inlet strainer allows rapid cleaning. For automatic | operation use Rule Float Switches. Integrated ignition protection. | Features: Fuse
Bilge water alarm panel provides an audible and visual means of warning that water level in your bilge is beyond your bilge pump switch level (not include).Height: 63,5 mmWidth: 82,6 mmSplash water proofedVoltage: 12 V | Made in: China | Voltage: 12 V
Fully automatic bilge pump. Switch on when the water reaches a height of | 60 mm, when the water is depleted, the pump automatically turns off. | Unique sensor technology ensures that the pump only switches on when it | is in contact with water, and the pump does not switch on when it comes | to oil -
Fully automatic bilge pump. Switch on when the water reaches a height of | 60 mm, when the water is depleted, the pump automatically turns off. | Unique sensor technology ensures that the pump only switches on when it | is in contact with water, and the pump does not switch on when it comes | to oil -
Rule Mate 800 Submersible is fully automated bilge compact pump for smaller vessels with integral sensor. Air Vents in the body to help prevent air locks in challenging installations. Back up feature prevent dry running if sensor is fouled, pump reverts to 2.5 minute cycle mode. | Voltage: 12 V | Made
Manual bilge pump manufactured from oil and petrol resistant plastic. Color: blue/orange. In-and outlet Ø 20 mm. Length – 35 cm. Includes drain hose. | Made in: Italy | Voltage: Neuvedené
Manual bilge pump manufactured from oil and petrol resistant plastic. Color: blue/orange. In-and outlet Ø 20 mm. Length – 55 cm. Includes drain hose. | Voltage: Neuvedené | Made in: Italy
Bilge pump with neoprene cover. It is practical, easy to install and secure, made of solid materials and resists forces up to 15,000 Newtons. The pump operates continuously and can pump up to 100 liters of water in 24 hours. Suction height is 8.2 m. The water is pumped through a hose located at the
Built on market leading valve technology, it is as reliable as the Gulper 220 but with a 35% higher flow. Improved features in comparison with the 220 model: 1)Patented Ezi-Clamp locking ring: head rotates 360° without loosing screws. 2) 3-foot design for quick and easy installation
Compact , low-cost, self-priming freshwater foot pump. Easy to install and useful in restricted spaces. Angled foot operation for more comfortable pumping. Can be used to prime Whale in-line booster pumps. Flow rate - 8 l / min, for hoses 13 mm in diameter. | Voltage: Neuvedené | Made in: China
Foot Water Pump - A simple solution for water supply in small kitchens. A low-cost freshwater system for faucets and showers. Ideal for use as a backup pump for electrical systems. Suitable for pumping fresh and sea water. Multiple directional inputs and hose outputs facilitate installation. Three
Low profile automatic pump for confined bilge spaces. Built-in field sensor switch, no maintenance required. Excellent operation even in case of dirt, oil, fuel, etc. Easy access to strainer. Capacity - 69 l / min, hose diameter - 25 mm, voltage - 12 V. | Voltage: 12 V | Made in: United Kingdom
Low profile automatic pump for confined bilge spaces. Built-in field sensor switch, no maintenance required. Excellent operation even in case of dirt, oil, fuel, etc. Easy access to strainer. Capacity - 40 l / min, hose diameter - 19 mm, voltage - 12 V. | Made in: United Kingdom | Voltage: 12 V
Built on market leading valve technology, it is as reliable as the Gulper 220 but with a 35% higher flow. Improved features in comparison with the 220 model:Patented Ezi-Clamp locking ring: head rotates 360° without loosing screws.3-foot design for quick and easy installation.Anti-vibration rubber