Whale Gulper pump 320 12V

Built on market leading valve technology, it is as reliable as the Gulper 220 but with a 35% higher flow. Improved features in comparison with the 220 model:Patented Ezi-Clamp locking ring: head rotates 360° without loosing screws.3-foot design for quick and easy installation.Anti-vibration rubber

£ 225,00

Whale Gulper pump 320 24V

Built on market leading valve technology, it is as reliable as the Gulper 220 but with a 35% higher flow. Improved features in comparison with the 220 model: 1)Patented Ezi-Clamp locking ring: head rotates 360° without loosing screws. 2) 3-foot design for quick and easy installation

£ 498,00

Whale Gulper Macerating Pump 12 V

This pump is connected to the toilet unit or to the waste water tanks, is used to drain toilet units or tanks. Virtually unblockable, can run dry, self priming and can be also be used with vacuum toilet units. Materials: nylon/fibreglass + Hypalon rubber + brass + stainless steel. Maximum suction

£ 57,30

Whale In Line Submersible Pump 12V

Whale electric pump range is manufactured from highest quality in-house moulded parts and robust motors. Compact, quiet lightweight high performance electric impeller pumps fit in line to increase flow rate. Simple, compact and an economical solution, Long life, very quiet with low power

£ 125,00

Marco VP45-N Vane pump 45 l/min 12V

Self-priming electric vane pump with integrated by-pass valve. Aluminum body. Two options connection for 25 mm hose. Rotor and vanes made of resin. Brush holder with EMI filter. Main applications: diesel, oil and anti-freeze refuelling. Available also with case and handle for easy transport, On/Off

£ 163,00

Marco UP3-PV PTFE Gear pump 15 l/min with check valve 12V

Self-priming electric pumps with helical PTFE gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service. Technical parameters: Voltage – 12 V, Consumption – 6 A, Fuse – 10 A, Self-priming – 1,5 m, Pressure – 2 bar,

£ 253,00

Marco UP12-PV PTFE gear pump 36 l/min with check valve - 12V

Self-priming electric pumps with helical PTFE gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service. Technical parameters: Voltage – 12 V, Consumption – 14 A, Fuse – 20 A, Self-priming – 3 m, Pressure – 2 bar,

£ 163,00

Marco UP3-PV PTFE Gear pump 15 l/min with check valve 12V

Self-priming electric pumps with helical PTFE gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service. Technical parameters: Voltage – 12 V, Consumption – 6 A, Fuse – 10 A, Self-priming – 1,5 m, Pressure – 2 bar,

£ 161,00

Marco VP45 Battery kit with 45 l/min vane pump 12V

Self-priming electric vane pump with integrated by-pass valve. Aluminum body. Two options connection for 25 mm hose. Rotor and vanes made of resin. Brush holder with EMI filter. Main applications: diesel, oil and anti-freeze refuelling. Available also with case and handle for easy transport, On/Off

£ 239,00

Marco UP12-P PTFE gear pump 36 l/min - 12V

Self-priming electric pumps with helical PTFE gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main applications: bilge service, transfer of water. Technical parameters: Voltage – 12 V, Consumption – 14 A, Fuse – 20 A, Self-priming – 3 m,

£ 169,00

Marco VP45-K Refuelling kit with 45 l/min vane pump 12V

Kit for diesel refueling. Includes the vane pump with integrated by-pass valve and battery clips. Refueling gun, 2 m priming hose, 3 m delivery hose and intake filter. Technical parameters: Voltage – 12 V, Consumption - 8 A, Fuse – 20 A, Self-priming - 1.5 m, Pressure – 1,2 bar, Flow rate -

£ 107,00

Marco UP2-P PTFE Gear pump 10 l/min - 12V

Self-priming electric pumps with helical PTFE gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main applications: transfer of water and liquid additives for engines. Technical parameters: Voltage – 12 V, Consumption – 3 A, Fuse – 5 A,

£ 239,00

Marco UP12-P PTFE gear pump 36 l/min - 12V

Self-priming electric pumps with helical PTFE gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main applications: bilge service, transfer of water. Technical parameters: Voltage – 12 V, Consumption – 14 A, Fuse – 20 A, Self-priming – 3 m,

£ 113,00

Marco UP2-PV PTFE Gear pump 10 l/min with check valve - 12V

Self-priming electric water pump with PTFE gears, complete with in-line filter, brass body with stainless steel shaft, suitable for fresh or salt water. For intermittent use only. There are numerous fields of application for this pump, however only exclusively with the allowed liquids mentioned:

£ 240,00

Marco UP6/A Water pressure system 26 l/min - 12V

Self-priming automatic electric pump with helical PTFE gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers. Technical

£ 174,00

Marco UP3/A Water pressure system 15 l/min 12V

Self-priming automatic electric pump with helical PTFE gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers. Technical

£ 246,00

Marco UP6-PV PTFE Gear pump with check valve 26 l/min - 12V

Self-priming electric pumps with PTFE gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: bilge service. Technical parameters: Voltage – 12 V, Consumption – 10 A, Fuse – 15 A, Self-priming – 1,5 m, Pressure – 2 bar, Flow rate – 26

£ 241,00

Marco UP6-PV PTFE Gear pump with check valve 26 l/min - 12V

Self-priming electric pumps with PTFE gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: bilge service. Technical parameters: Voltage – 12 V, Consumption – 10 A, Fuse – 15 A, Self-priming – 1,5 m, Pressure – 2 bar, Flow rate – 26

£ 71,30

Whale Hand Pump MK6

Hand Pump MK6 from Whale. | Made in: Great Britain

£ 32,80

Whale Service kit MK3

Repair kit for foot pump. | Made in: China | Voltage: Neuvedené

£ 83,60

Whale SS 650 Automatic Bilge Pump

Low profile automatic pump for confined bilge spaces. Built-in field sensor switch, no maintenance required. Excellent operation even in case of dirt, oil, fuel, etc. Easy access to strainer. Capacity - 40 l / min, hose diameter - 19 mm, voltage - 12 V. | Made in: United Kingdom | Voltage: 12 V

£ 150,00

Whale SS 1100 Automatic Bilge Pump

Low profile automatic pump for confined bilge spaces. Built-in field sensor switch, no maintenance required. Excellent operation even in case of dirt, oil, fuel, etc. Easy access to strainer. Capacity - 69 l / min, hose diameter - 25 mm, voltage - 12 V. | Made in: United Kingdom | Voltage: 12 V

£ 627,06

Ultraflex UP20F Steering Pump

The Steering UP20F pump is equipped with a non-return valve, which hit back on the engine steering wheel is prevented. A built-in by-pass valve prevents further damage in overpressure. | | 3/4'' conical shaft made of anodized aluminum | Corrosion resistant composite packaging | Easily accessible valve and

£ 47,90

Whale MK2 Baby Foot - self-priming foot pump

Compact , low-cost, self-priming freshwater foot pump. Easy to install and useful in restricted spaces. Angled foot operation for more comfortable pumping. Can be used to prime Whale in-line booster pumps. Flow rate - 8 l / min, for hoses 13 mm in diameter. | Voltage: Neuvedené | Made in: China

Whale Gulper pump 320 12V

Muziker.uk