Lowest price in the last 45 days: £ 206
Prices and availability may change several times a day. Check the current data directly in the e-shops. You can find all available colors and sizes directly in the e-shops.
The Octamizer ® is an analog octave divider that creates a wide range of musical sounds an octave below your original note. The Octamizer ® features independent volume controls for both the Clean and Octave sounds, so dialing in the exact amount of each is a cinch. The two discrete signal paths also have their own tone controls that were specifically designed to enhance and expand their musical possibilities. The CLEAN TONE control uses a full spectrum tilt EQ, allowing for the boosting of treble while cutting bass and vice versa. This unique circuit allows you to create a clean sound that creates an octave doubling effect or to blend the sounds together for a great thick, snarky synth tone. The Octamizer’s OCTAVE FILTER control is a multi-pole low-pass filter that lets you shape the octave sound from smooth and deep to edgy and synthbass-like. Colour : Red Controls : Level Width (cm) : 6.8 Number of Buttons : 1 Controls : Filter Power Supply : 9V Number of Input Ports : 1 Height (cm) : 5.3 Colour : Black Battery Operation : Yes Inputs : Jack 6,3 mm TS Battery Type : 9V Number of Outputs : 1 Power Supply : Adapter UK/EU Power supply included : No MIDI Interface : No Outputs : Jack 6,3 mm TS Depth (cm) : 13.3 Package Contents : Manual Effect Types : Octaver Made in : USA Type : Octaver Net Weight (kg) : 0.5 Controls : Tone True Bypass : Yes USB : No
Product Aguilar Octamizer V2 belongs to the product group Musical instruments, belongs to the brand Aguilar, in color Black Red, Red Black, you can find it at the store Muziker.uk.
Product Aguilar Octamizer V2 has an EAN code 8245990017320.
Color | Red Black |
Category | Strings, Musical instruments, Pedals |
Brand | Aguilar |
Color | Black Red, Red Black |
E-shop | Muziker.uk |
EAN | 8245990017320 |
The Octamizer ® is an analog octave divider that creates a wide range of musical sounds an octave below your original note. The Octamizer ® features independent volume controls for both the Clean and Octave sounds, so dialing in the exact amount of each is a cinch. The two discrete signal paths
The JHS Colour Box V2 has all the same functionality of the popular V1 version with many new and improved additions like expanded EQ controls, a Hi/Lo switch for massive clean headroom, and the ability to pass phantom power to your condenser mics. The Gain section in red has three controls: Master,
At only 23 lbs. the SL 110 is the most compact cabinet in Aguilar’s lineup. Characterized by it’s focused low-end, balanced midrange, and smooth top-end, the SL 110 delivers modern performance in a classic looking package. Engineered for the bass player on the go, its hybrid design blends the
At only 23 lbs. the SL 110 is the most compact cabinet in Aguilar’s lineup. Characterized by it’s focused low-end, balanced midrange, and smooth top-end, the SL 110 delivers modern performance in a classic looking package. Engineered for the bass player on the go, its hybrid design blends the
At only 23 lbs. the SL 110 is the most compact cabinet in Aguilar’s lineup. Characterized by it’s focused low-end, balanced midrange, and smooth top-end, the SL 110 delivers modern performance in a classic looking package. Engineered for the bass player on the go, its hybrid design blends the
The RockBoard Power Block is a compact multi-power supply for effects pedals and offers 10 power slots for the parallel power supply of up to 10 pedals. With a total of 1,200 mA for the eight 9V connections and a total of 800 mA for the two 18V connections, modern effects pedal setups can be easily
Giving the Tone Hammer 700 its flexible tone-shaping capabilities is Aguilar’s Tone Hammer preamp, the same preamp used in the Tone Hammer D.I./preamp pedal, which has become a favorite of bass players all over the world. The 4.9 lb. (2.22 kg) Tone Hammer 700 delivers 700 continuous watts @ 4 or
On board bass preamp. The OBP-3 is Aguilar’s most flexible onboard preamp design, providing +/-18 dB of cut and boost at 40 Hz, +/- 16 dB of cut and boost at either 400 Hz or 800 Hz and +/- 16 dB of treble cut and boost at 6,5 kHz. The OBP-3 has multiple wiring options, and can be wired with
Solid state bass amplifier the clarity, dynamic range and fast transient response of the legendary AG 500 with a bigger low-end and high headroom. This solid state amplifier provides 700 continuous watts at 4 ohms while only weighing 4.9 lbs. (2.22 kg)!. Boasting an incredibly flexible EQ section,
Extremely flexible on-board guitar preamplifier that provides +/-18dB of cut and boost at 40Hz, +/- 16dB of cut and boost at either 400Hz or 800Hz and +/- 16dB of treble cut and boost at 6.5 kHz. It comes supplied with separate Treble, Mid, and Bass pots, and black mini-toggle switch for Midrange
The OBP-1’s boost-only design gives you the tone shaping benefits of active electronics without losing the inherent sound of the instrument. The OBP-1’s discrete, all-FET circuitry features up to 18dB of boost at 40Hz and 4kHz, creating a sonic environment high in dynamic headroom and low in
The OBP-2SK was designed to give bassists fat tone while being small enough to fit into tight control cavities. Wire this preamp with one 9 volt battery and it will fit into just about any instrument. With +/-18dB of boost and cut at 40Hz and +/- 16dB of treble boost and cut at 6.5 kHz you can
Ultra-lightweight solid state amplifier head for electric bass guitar that makes a big sound but leaves only a tiny footprint. It has the sound, the look, and it is assembled at the Aguilar factory in NYC along with all of other legendary bass heads. Its Class D power section provides an output of
On board bass preamp. The OBP-1’s boost-only design gives you the tone shaping benefits of active electronics without losing the inherent sound of the instrument. The OBP-1’s discrete, all-FET circuitry features up to 18dB of boost at 40Hz and 4kHz, creating a sonic environment high in dynamic
The OBP-2 was designed to give bassists fat tone while being small enough to fit into tight control cavities. Wire this preamp with one 9 volt battery and it will fit into just about any instrument. With +/- 18dB of boost and cut at 40Hz and +/- 16dB of treble boost and cut at 6.5 kHz you have can
Portable 300W RMS speaker cabinet for electric bass guitar from DB series that combines the full low-end extension of the Aguilar GS 112 model with the punchy midrange of the DB line. A 12” heavy-duty cast frame Eminence driver is mounted in a rear ported 13-ply Baltic birch enclosure to create a
The strong, metal Music Stand attaches to mounts included on the back of your instrument. The stand is easily mounted without the use of any tools, and can be fitted in the soft case for transport. Compatible products: Nord C2 Combo Organ, Nord C2D, Nord Electro 3 HP, Nord Electro 4 HP, Nord
Super-light solid-state head amplifier for electric bass guitar that combines 3 bands of flexible EQ, a colourful “Drive” control and 500 W of Class D power. It provides the legendary 'Aguilar Sound' while still fitting into the accessory pouch of most gig bags – the perfect choice for bass
This sturdy, ultra-compact unit provides two different modes of operation: program change and control change, plus allows to have access to tuner and tap delay functions of the bass multiamp, and to add an optional expression pedal. The Bass Multiamp midi pedalboard runs on a 9vdc phantom power
This padded carrying bag is the perfect fit for the Tone Hammer 500. The side pocket is big enough to fit cables, tuner, or other small accessory items. A detachable shoulder strap makes the bag even easier to carry when you don’t have a free hand. It doesn’t get much more portable than
This padded carrying bag is the perfect fit for the Tone Hammer 500. The side pocket is big enough to fit cables, tuner, or other small accessory items. A detachable shoulder strap makes the bag even easier to carry when you don’t have a free hand. It doesn’t get much more portable than
Footswitch for Alpha·Omega 900 amplifier from Darkglass . Alpha·Omega Super Intelligent Footswitch has three programmable footswitches for assigning channels (Clean, Alpha, Omega, Mod) and compressor state (On or Off). It also has a separate mute footswitch. The channel footswitch functions are
On-board preamplifier for electric bass guitar that is designed to respect the instrument's natural character while expanding exponentially the tonal possibilities. It has been redesigned to improve ease of installation with a full solder-less setup and carries the pristine and delicate
Use Red Remote with select JHS Pedals to remotely activate the on-board toggle found on the pedal itself. By connecting the Red Remote to a Red Remote equipped pedal with any 1/4” instrument cable, this essentially acts as an on-the-fly switcher to give you more tonal options in any setting. The