Lowest price in the last 45 days: £ 451
Prices and availability may change several times a day. Check the current data directly in the e-shops. You can find all available colors and sizes directly in the e-shops.
The JHS Colour Box V2 has all the same functionality of the popular V1 version with many new and improved additions like expanded EQ controls, a Hi/Lo switch for massive clean headroom, and the ability to pass phantom power to your condenser mics. The Gain section in red has three controls: Master, Pre-Vol, and Step. The Master volume controls the overall volume of the unit. The Pre-Vol controls the amount of gain between the two internal gain stages. This acts as a 'drive' or 'gain' control, adding more grit, distortion, and even fuzz as you increase the gain. The Step control increases the gain of each preamp stage in five stages. In the Lo mode, you will easily be able to get ultra clean sounds without breakup. Lo Mode is excellent for tone shaping when distortion is not needed. In the Hi mode, the Colour Box V2 will distort much more readily, giving you a broad spectrum of overdrive, distortion, and fuzz sounds. In addition to the Hi/Lo gain switch, there is a -20 dB pad switch which only works in XLR input mode and can help tame the volume for high output microphones. The EQ section in blue has three new Shift controls correlating to its standard Treble, Middle and Bass controls. The Shift knobs adjust the range of frequencies that the Treble, Middle, and Bass knobs control. The Shift knobs give you precision control over the EQ for anything you put through the Colour Box V2. The Hi-Pass section is enabled by the toggle switch below the Hi-Pass knob. The Colour Box V2 has a combination XLR and 1/4' input jack to use either an instrument or microphone. Select your input with the input selector switch on the right side of the pedal labeled INST/XLR. Controls: Shift;Treble;Step;Preamp Volume;Master;Bass;Hi-Pass Filter;Mid True Bypass: Yes Power Supply: Adapter Inputs: XLR;Jack 6,3 mm TRS Outputs: XLR;Jack 6,3 mm TRS Made in: USA Type: Preamp;DI Box;Equalizer USB: No MIDI Interface: No Battery Operation: No Colour: White UK/EU Power supply included: No Package Contents: Manual
Product JHS Pedals Colour Box V2 can be found among the products in the group Musical instruments, belongs to the brand JHS Pedals, in color White, you can find it at the store Muziker.uk.
Product JHS Pedals Colour Box V2 is assigned an EAN code 6504152122244.
Color | White |
Category | Boxes, Musical instruments, Amplifiers, Pedals |
Brand | JHS Pedals |
Color | White |
E-shop | Muziker.uk |
EAN | 6504152122244 |
The JHS Colour Box V2 has all the same functionality of the popular V1 version with many new and improved additions like expanded EQ controls, a Hi/Lo switch for massive clean headroom, and the ability to pass phantom power to your condenser mics. The Gain section in red has three controls: Master,
Guitar pedal - analogue attenuator. Tames a screaming-loud tube amp by running through the effects loop and controlling the amount of signal sent to the power section. Lets you really push the front end of your amp for the natural feel and tone that you can’t get any other way. Retain the
Guitar pedal - A/B footswitch. Simple footswitch design selects between a pair of 6,3 mm jacks on the left side of the unit. Instantly swap between two instruments. Perfect for switching tones on dual-amplifier rigs. Isolate your tuner from the signal chain, while achieving silent onstage tuning
Use Red Remote with select JHS Pedals to remotely activate the on-board toggle found on the pedal itself. By connecting the Red Remote to a Red Remote equipped pedal with any 1/4” instrument cable, this essentially acts as an on-the-fly switcher to give you more tonal options in any setting. The
A preamp/boost effect for electric guitars, acoustic guitars or bass guitars. This is a true interpretation of the Boss FA-1 FET with JHS enhancement. In addition, it is equipped with a simple and effective equalizer. The effect is ideal for building distorted pedals, but its true charm lies in
Signal switch pedal from MXR. The A/B Box allows you to route your instrument's signal to two separate output amp paths. Use it to switch between amps or run them both at the same time with different effect configurations so you can find your ultimate sound. Use the Thru jack to connect to a tuner,
Active A/B/Y switch for electric guitar. It is designed to split the signal into two separate paths to switch between. The device has a built-in output transformer that eliminates noise. In addition, it is equipped with FET transistors that provide a completely silent switching and the ability to
A/B loop switch for electric guitars. The device can be used as A/B true bypass looper, simple true bypass looper, A/B Box Amp input switcher or effect loop A/B switcher. It features one input, one output and send/return connectors for two separately selectable effect loops. The switch is true
The One Control Pedal Board Junction Box 4M belongs to the Minimal Series, which offers many useful tools and gadgets for modern pedalboards. The JB4M comes with two pairs of 6.35 mm (1/4') mono jacks, two pairs of 6.35 mm stereo jacks (TRS) and a pair of MIDI jacks which are all respectively
Reactive 30W/8Ohm power attenuator in pedal format that tames the wall-shaking volume of any mid-powered tube amplifier and pushes its tubes to their limits at bedroom volume levels. Thanks to its reactive load technology, it response to the power amp just like a speaker and keeps its tone and
The RockBoard Power Block is a compact multi-power supply for effects pedals and offers 10 power slots for the parallel power supply of up to 10 pedals. With a total of 1,200 mA for the eight 9V connections and a total of 800 mA for the two 18V connections, modern effects pedal setups can be easily
AMPED 2 is a 100 Watt pedal power amplifier with drive pedals in the front end, and an advanced effects processor, capable of delivering the tone and feel of traditional valve amps. You can use it in the front end of a traditional amp, power a cabinet at 100 Watts or go direct, ensuring you can
The Pedal Baby 100 is a 100W Class A/B power amplifier, designed for the touring musician. Neutral-sounding but still flattering, it’s perfect for guitarists running pedal boards, modellers or digital processors. Class A/B amps have a certain “feel” that you can’t get any other way. The
Compact, dual pedal switch designed to control effect pedals or switch amplifier channels. It contains two switches, which are arranged in tandem. Each of them has an optional Momentary / Latch mode, thanks to which it offers the possibility of controlling various devices. It is powered by a 9V
Footswitch control pedal that is compatible with Roland and BOSS amplifiers and allows for expansion as well, providing inputs for two expression pedals for real-time control of volume and drive. With Function switch, Manual switch and Channel 1 to Channel 4 switches it allows for switching
Dual footswitch pedal that was made especially for Vox amplifiers and is compatible with Valve Reactor series (AC30VR, AC15VR), AC Custom series (AC15C1, AC30C2(X)), all Night Train G2 models, Pathfinder and Cambridge amps. It features high-quality durable all-metal construction with twin LED
AMPED 1 is a professional 100W guitar amplifier in a compact pedalboard. This pedal turns any pedalboard, modeler, and multi-effect into a powerful amp, allowing users to take their unique sound on the road without high shipping costs. Thanks to the reduced power to 1 W and the USB-C connection,
The R1 Legend Amp Series pedal, one of most sought after high gain modern amplifiers now in pedal form, the Mesa Triple Rectifier. Huge ultra modern distortion tone now able to fit on your crowded pedalboard. Sparkling tight chunky rhythm that will impress even the most demanding ears, and cutting
Twobutton footswitch pedal for Marshall MG4 series amplifiers that allows for switching the Clean/Crunch channel and turning the Overdrive on or off. It is compatible with the MG50FX, MG101FX, MG102FX and MG100HFX models. | Made in: Vietnam
Two-button channel/reverb footswitch pedal that works with various Fender amplifiers and effect pedal. | Made in: Mexico
We always craved a clean head. A device that is “out of the box” is an amplifier without added effects. Uncomplicated, intuitive, and for each one of us to be able to unveil the layer of sophistication that better serves our projects and skills. The Exponent 500 is a new concept that once
Latching control pedal with On/Off switch that features a LED control to show when the pedal is on or off. The connection is made when pressing the pedal (connection is locked) and disconnected by pressing the pedal again. A 9V battery is necessary only for the operation of the LED, the pedal is
Six-button assignable footswitch pedal for Marshall JMD100 series digital amplifiers. | Made in: China
Passive footswitch pedal that allows plugging a single guitar into two amplifiers or plugging two guitars into a single amplifier, making it easy and convenient to create a rig with eminent flexibility and a variety of tone options. “A or B” and “A and B” switching options allow for greater