Lowest price in the last 60 days: £ 515
Prices and availability may change several times a day. Check the current data directly in the e-shops. You can find all available colors and sizes directly in the e-shops.
The JHS Colour Box V2 has all the same functionality of the popular V1 version with many new and improved additions like expanded EQ controls, a Hi/Lo switch for massive clean headroom, and the ability to pass phantom power to your condenser mics. The Gain section in red has three controls: Master, Pre-Vol, and Step. The Master volume controls the overall volume of the unit. The Pre-Vol controls the amount of gain between the two internal gain stages. This acts as a 'drive' or 'gain' control, adding more grit, distortion, and even fuzz as you increase the gain. The Step control increases the gain of each preamp stage in five stages. In the Lo mode, you will easily be able to get ultra clean sounds without breakup. Lo Mode is excellent for tone shaping when distortion is not needed. In the Hi mode, the Colour Box V2 will distort much more readily, giving you a broad spectrum of overdrive, distortion, and fuzz sounds. In addition to the Hi/Lo gain switch, there is a -20 dB pad switch which only works in XLR input mode and can help tame the volume for high output microphones. The EQ section in blue has three new Shift controls correlating to its standard Treble, Middle and Bass controls. The Shift knobs adjust the range of frequencies that the Treble, Middle, and Bass knobs control. The Shift knobs give you precision control over the EQ for anything you put through the Colour Box V2. The Hi-Pass section is enabled by the toggle switch below the Hi-Pass knob. The Colour Box V2 has a combination XLR and 1/4' input jack to use either an instrument or microphone. Select your input with the input selector switch on the right side of the pedal labeled INST/XLR. Outputs: XLR;Jack 6,3 mm TRS Type: Preamp;Equalizer;DI Box Controls: Shift;Step;Treble;Preamp Volume;Mid;Master;Bass;Hi-Pass Filter Power Supply: Adapter Inputs: XLR;Jack 6,3 mm TRS Made in: USA True Bypass: Yes Package Contents: Manual USB: No Colour: White MIDI Interface: No UK/EU Power supply included: No Battery Operation: No
Color | White |
The JHS Colour Box V2 has all the same functionality of the popular V1 version with many new and improved additions like expanded EQ controls, a Hi/Lo switch for massive clean headroom, and the ability to pass phantom power to your condenser mics. The Gain section in red has three controls: Master,
Guitar pedal - analogue attenuator. Tames a screaming-loud tube amp by running through the effects loop and controlling the amount of signal sent to the power section. Lets you really push the front end of your amp for the natural feel and tone that you can’t get any other way. Retain the
Guitar pedal - A/B footswitch. Simple footswitch design selects between a pair of 6,3 mm jacks on the left side of the unit. Instantly swap between two instruments. Perfect for switching tones on dual-amplifier rigs. Isolate your tuner from the signal chain, while achieving silent onstage tuning
Use Red Remote with select JHS Pedals to remotely activate the on-board toggle found on the pedal itself. By connecting the Red Remote to a Red Remote equipped pedal with any 1/4” instrument cable, this essentially acts as an on-the-fly switcher to give you more tonal options in any setting. The
A preamp/boost effect for electric guitars, acoustic guitars or bass guitars. This is a true interpretation of the Boss FA-1 FET with JHS enhancement. In addition, it is equipped with a simple and effective equalizer. The effect is ideal for building distorted pedals, but its true charm lies in
Active A/B/Y switch for electric guitar. It is designed to split the signal into two separate paths to switch between. The device has a built-in output transformer that eliminates noise. In addition, it is equipped with FET transistors that provide a completely silent switching and the ability to
A/B loop switch for electric guitars. The device can be used as A/B true bypass looper, simple true bypass looper, A/B Box Amp input switcher or effect loop A/B switcher. It features one input, one output and send/return connectors for two separately selectable effect loops. The switch is true
The RockBoard Power Block is a compact multi-power supply for effects pedals and offers 10 power slots for the parallel power supply of up to 10 pedals. With a total of 1,200 mA for the eight 9V connections and a total of 800 mA for the two 18V connections, modern effects pedal setups can be easily
The Octamizer ® is an analog octave divider that creates a wide range of musical sounds an octave below your original note. The Octamizer ® features independent volume controls for both the Clean and Octave sounds, so dialing in the exact amount of each is a cinch. The two discrete signal paths
Reactive 30W/8Ohm power attenuator in pedal format that tames the wall-shaking volume of any mid-powered tube amplifier and pushes its tubes to their limits at bedroom volume levels. Thanks to its reactive load technology, it response to the power amp just like a speaker and keeps its tone and
Signal switch pedal from MXR. The A/B Box allows you to route your instrument's signal to two separate output amp paths. Use it to switch between amps or run them both at the same time with different effect configurations so you can find your ultimate sound. Use the Thru jack to connect to a tuner,
The One Control Pedal Board Junction Box 4M belongs to the Minimal Series, which offers many useful tools and gadgets for modern pedalboards. The JB4M comes with two pairs of 6.35 mm (1/4') mono jacks, two pairs of 6.35 mm stereo jacks (TRS) and a pair of MIDI jacks which are all respectively