Yamaha HXCCII Drum Rack

Yamaha HXCCII Drum Rack

The cross clamp is used to connect two hexagonal tubes at 90-degree angles (for example, to connect a leg tube with a tube that has been horizontally set). | Material: Steel | Compatible with: Hex Rack | Made in: China

Yamaha HXREXII Drum Rack

The HXREXII creates a three-leg rack when combined with the HXR2LII. | Made in: China | Compatible with: Hex Rack;HXR2LII | Maximum Height: 580 mm | Material: Steel | Package Contents: T-Leg;Tom Clamp;Side Bar;Tube Clamp

Yamaha RCL500 Rack Clamp Drum Rack

Clamp for tom holder/cymbal attachment with an adapter. With the adapter: 16 mm, without the adapter: 22.2 mm. | Material: Steel | Made in: China

Yamaha HXR2LII Drum Rack

The basic HEXRACKII set consists of two legs and is fully compatible with Yamaha System Hardware. Compared to a typical hardware setup, the HEXRACKII uses less space and reduces floor clutter produced by stand legs, etc., around the kit. The system’s pipes and racks are made from aluminium, which

Yamaha HXDBII Drum Rack

The double bass is used to horizontally set two tubes at the same height - as in a double-bass configuration. Settings at various angles are possible when used with the clamp gear joint. | Compatible with: Hex Rack | Made in: China | Material: Steel

Yamaha TPCL500 Pad Holder

The TPCL500 is great for adding an extra tom pad to your tube-style electronic drum rack system (excludes HexRack). The clamp and holder are both included to expand your DTX series kit. | Made in: China

Yamaha HXOCII Drum Rack

The open clamp is used to attach tubes having different thickness (diameter 15-34mm, including hexagonal tubes) to the hexagonal tube. Although fine angle adjustment is possible with the gear joint, more stable setting can be achieved by limiting the movement only to the vertical direction. | Made

Yamaha HXTCII Drum Rack

This clamp attaches a tom clamp (CL945B, etc.) or cymbal holder (CH755, etc.) to the hex-shaped pipe and is compatible with 22.2mm diameter pipes. Its vertical angle is freely adjustable. | Material: Steel | Compatible with: Hex Rack | Made in: China

Yamaha HXACII Drum Rack

Several clamps for securing tubes of different thickness (15 –34 mm, including hexagonal tubes) are connected to the extended arm. These clamps can be used to secure tubes positioned far from each other. Each clamp has a gear joint, enabling fine angle adjustment. | Made in: China | Compatible with:

Yamaha HXTL23II Drum Rack

T-shaped leg for HexRackII (clamp and pipes are made from aluminium). Vertical pipe length: 23' (approx. 58cm). | Compatible with: Hex Rack | Maximum Height: 580 mm | Made in: China | Package Contents: T-Leg | Material: Steel

Yamaha HXTL30II Drum Rack

T-shaped leg for HexRackII (clamp and pipes are made from aluminium). Vertical pipe length: 30' (approx. 76cm). | Package Contents: T-Leg | Material: Steel | Made in: China | Compatible with: Hex Rack | Maximum Height: 762 mm

Yamaha HXCP24II Drum Rack

24' long x 34mm diameter hexagonal pipe made from aluminium. Using a complex cross section design combined with the aluminium alloy creates pipes that are significantly lighter in weight while providing greatly improved strength—as much as double that of conventional round pipe. | Made in:

Yamaha HXCP36II Drum Rack

36' long x 34mm diameter hexagonal pipe made from aluminium. Using a complex cross section design combined with the aluminium alloy creates pipes that are significantly lighter in weight while providing greatly improved strength—as much as double that of conventional round pipe. | Material:

Gibraltar SC-GCRA CH Drum Rack

The Chrome Right Angle Drum Rack Clamp is designed to create joints between vertical drum rack supports and any straight or curved horizontal drum rack bar. | Made in: Taiwan | Material: Chrome

Pearl PCL-100 Drum Rack Pipe Clamp Drum Rack

DW DWCPRKCAST Rack wheels Drum Rack

Set of two casters for drum racks with brakes. Finish: Chrome | Made in: Taiwan

Yamaha DT50K Drum Trigger

Bass drum mono trigger from Yamaha. Compatible with any bass drum with wooden hoops. Chrome-plated metal casing. Knurled screw for setting the sensitivity of the sensor. Including cable. Compatible with Yamaha DTX900M, DTX700, DTX502 and DTXM12 modules. Dimensions: 45 x 97 x 86/95 mm. Weight: 340

Yamaha FGDP-30

Introducing the Yamaha FGDP-30 Finger Drum Pad, designed for the ultimate finger drumming experience. With its ultra-sensitive pads arranged in an ergonomic layout, this instrument is perfect for unleashing your rhythmic creativity.Ultra-Sensitive Pads: The FGDP-30 boasts ultra-sensitive pads

Yamaha RK-MG12

Yamaha RK MG-12 is a set of rack mounts for Yamaha MG12 and MG12XU mixers. The package contains 2 pcs. | Colour: Black | Type: Rackmount | Compatible with: Yamaha MG12;Yamaha MG12XU | Made in: Indonesia

DW DWCPRKB12S 12'' straight Drum Rack

Straight Rack Bar for 9000 series drum racks. Diameter: 1,5'', Lenght: 12''. Finish: Chrome | Made in: Taiwan

DW DWCPRKB36S 36'' straight Drum Rack

Straight Rack Bar for 9000 series drum racks. Diameter: 1,5'', Lenght: 36''. Finish: Chrome | Made in: Taiwan

Pearl PC-8 Rack Clamp Drum Rack

Yamaha P31220YV12391 20" White Resonant Drum Head

Resonating drum head of the Powerstroke type with the Yamaha logo. | Type: Resonant | Series: Powerstroke | Original Colour by Producer: White | Offer Configuration: Standard offer | Made in: USA | Suitable for: Bass Drum | Colour: White | Diameter (inch): 20.0 | Number of Layers: 1 | Diameter: 20' | Variant: New

Yamaha P31224YV13410 24" White Resonant Drum Head

Resonating drum head of the Powerstroke type with the Yamaha logo. | Made in: USA | Series: Powerstroke | Offer Configuration: Standard offer | Original Colour by Producer: White | Type: Resonant | Finish: Clear Drumhead | Variant: New Logo | Diameter (inch): 24.0 | Diameter: 24' | Suitable for: Bass Drum | Number of