Windscreen for Roland R-07. The Roland R07-WS windscreen is designed to fit over the internal microphones on the Roland R-07 handheld recorder to reduce unwanted wind noise from recordings. Stretch elastic cuff slips on and off easily while still allowing access to control panel functions. Made
The Invisible LAV Covers FUR OUTDOOR allow you to easily mount and hide your Lavalier microphones directly on the skin or on clothes. Each package of Invisible LAV Covers FUR OUTDOOR consists of 9 pieces of fur fabric in 3 colors: Black, Beige and White together with 30 pieces of Bubblebee
The Invisible Lav Covers allow you to easily mount and hide your Lavalier microphones directly on the skin or on clothes. | | Optimal for use under clothes | Stick Directly to the Skin or Clothes | Hypoallergenic / Allergy Tested Tape | 9 reuseable fabric pieces | 30 Pieces of High Quality Tape | | Material:
The Lavalier Foam is a discreet, slip-on foam windshield, designed to protect personal microphones against light wind and pop noise. Made of durable, high quality open-cell acoustic foam, Lavalier Foam windshields offer up to 20dB of pop and wind noise attenuation, whilst avoiding concurrent high
Windscreen for handheld recorder that uses artificial fur to block even the highest wind gusts from the internal microphones of compatible TASCAM recorder: DR-1, GT-R1, DR-2d, DR-05, DR-05X, DR-07, DR-07mkII, DR-22WL, DR-40, DR-100, DR-100mkII. It works in both XY and AB position. | Made in: South
Locking Microphone Windscreen reduces unwanted breath and wind noise. For use with Shure SM57 and 545 Series microphones. Color: Black
The Shotgun Mic Foam is a discreet, slip-on foam windshield, designed to protect the microphone head against light wind and pop noise. Made of durable, high quality open-cell acoustic foam, these windshields offer up to 20 dB wind noise attenuation, whilst keeping high frequency loss to a
Stainless steel windshield blade with silicone flap 559 mm | Colour: Silver | Length: 559 mm | Made in: China
RODE DeadMouse windshield for RODE PinMic microphones. Dimensions: 26 x 44 x 44 mm. | | Made in: Australia | Compatible with: RODE PinMic
Having a spare mic grille is a must these days. The V7 MG ensure germs, viruses or something less harmful like garlic breath from the singer before you doesn't inhibit your best possible performance. All it takes is replacing your old grille with a new one!Compatible with any V7 dynamic, V7 mic
Furry wind cover for the Røde VideoMic GO that is designed for use in windy environments. It is made of artificial fur, specially created to minimise wind noise while remaining acoustically transparent. Dimensions: 180 x 70 x 70 mm. Weight: 15 g. | Made in: Australia
High-level protection against wind noise for lavalier mics in the open air. Reduces lavalier microphone noise and clothes rustle. Designed for use with Lavalier microphones worn on the outside of clothing. It is suitable for use in windy outdoor interview conditions, and greatly reduces microphone
Orange windscreen for microphone designed for Rode VideoMicro and VideoMic Me devices. It has been designed for wind noise reduction and use in adverse natural conditions. It consists of open-cell foam covered with synthetic fur. Dimensions: 119 x 91 x 61 mm. Weight: 18 g. | Compatible with:
RODE W12 is a faux fur wind protection for the VideoMic GO II microphone, which provides sufficient protection of the microphone insert against noisy gusts of wind or flat consonants. (p, d, t,…). It contains a seal made of synthetic rubber, which covers all unused microphone input connectors
The Beyerdynamic WS 59 AZ windshield foam is designed for the Beyerdynamic M 59/69/88, TG-X 48/58/60/80, Opus 29/39/69/81/89, TG V50d and comes in charcoal-grey. | Type: Windshield | Made in: Germany | Compatible with: Microphone
Pink windscreen for microphone designed for Rode VideoMicro and VideoMic Me devices. It has been designed for wind noise reduction and use in adverse natural conditions. It consists of open-cell foam covered with synthetic fur. Dimensions: 119 x 91 x 61 mm. Weight: 18 g. | Made in: China | Original
WS-Chroma is a set of two foam windshields for the VideoMic NTG coloured blue and green, making them suitable for chroma keying. The coloured foam enables the microphone to be placed in the frame and closer to the talent for optimal sound quality. Chroma key compositing can then be used to remove
Blue windscreen for microphone designed for Rode VideoMicro and VideoMic Me devices. It has been designed for wind noise reduction and use in adverse natural conditions. It consists of open-cell foam covered with synthetic fur. Dimensions: 119 x 91 x 61 mm. Weight: 18 g. | Compatible with:
Windshield cap from 5mm thick, UV resistant neoprene. Velcro fastening. Price for a pair. Length 25 cm | Length: 25 cm | Made in: China | Thickness: 5 mm
The Dead Kitten windshield is designed for minimising any wind noise when using a microphone in high wind conditions. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent. Dimensions: 80.00mmH x 80.00mmW x 80.00mmD, weight: 25 g. | Made in:
Windscreen reduces unwanted breath and wind noise when using SM7DB microphones. | Type : Windscreen | Colour : Black | Application : Recording | Compatibility : Shure SM7dB
Windscreen reduces unwanted breath and wind noise while using the SM7A and SM7B microphones. | Original Colour by Producer: Black | Application: Recording;Stage;Studio | Compatible with: SM7B;SM7A;SM7 | Type: Windshield | Compatibility: Shure
Universal windscreen protection for Zoom products. It is compatible with devices H1, H2n, H4n, H5, H6, Q4, Q8, iQ5, iQ6 and iQ7. Colour: Grey. | Made in: China
This product is for the individuals who have their own routines on how to mount Lavalier microphones and insist to use the best possible tape on the market. This double-sided tape is exactly the same tape that comes with Invisible LAV Covers. The only difference is that you do not get any mesh
Windscreen for effective wind noise suppression while recording. Artificial fur blocks even high wind gusts from the internal microphones. Can be used with the included microphones set to XY or AB position. Ideal for use with Portacapture X8 or Portacapture X6, also compatible with DR-07/DR-07X,
If your performance requires even more protection from the elements (e.g. in a windy outdoor venue), you can simply place an additional foam windscreen W82 above the the omnidirectional wire-mesh protection cap (WM82). It increases the size of the microphone by only a fraction, and produces clean
Snap-fit windscreen securely fastens to Microflex gooseneck microphones to reduce unwanted breath and wind noise. Four windscreens included. | Application: Studio;Stage;Recording | Compatibility: Shure | Type: Windshield | Compatible with: MX418;MX412 | Original Colour by Producer: Black
Fur cover for VideoMic Pro microphone (also for the version with Rycote Lyre shockmounting). It is designed for use in bad weather conditions and minimizes wind noise and preserves acoustic clarity. | Made in: China
The Dead Cat windshield is designed for minimising any wind noise when recording in high wind conditions. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent. | Made in: China
Windshield cap from 5mm thick, UV resistant neoprene. Velcro fastening. Price for a pair. Lenght 55 cm | Length: 55 cm | Thickness: 5 mm | Made in: China
Foam wind shields prevent disturbing sounds that arise from wind, rapid movements of the microphone pole or sensing from a short distance. They are made of special foam (polyurethane foam with open cells) and do not cause disturbing resonances or affect the directional characteristics of the
The WS11 is a professional windshield for the VideoMic NTG. Featuring special foam covered by acoustically transparent synthetic fur, it minimises wind noise and plosives in all recording scenarios. | Type: Windshield | Compatible with: VideoMic NTG | Model: WS11 | Made in: Australia | Weight: 21 g
Furry wind cover. Features: Designed for the VideoMic Pro+, for use in windy environments. Designed to reduce wind noise when recording outdoors, the DeadCat VMP+ combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind
They are built to stay safe and secure on your Lavalier microphone, with a tight fitting opening aperture. Fur and mesh construction makes The Windbubble acoustically transparent to keep the sound very close to the microphones natural frequency response. The construction of the Windbubble holds a
If your performance requires even more protection from the elements (e.g. in a windy outdoor venue), you can simply place an additional foam windscreen W82 above the the omnidirectional wire-mesh protection cap (WM82). It increases the size of the microphone by only a fraction, and produces clean
The Bubblebee Windbubble consists of an outer shell of the finest imitation fur (we do like them animals) and an inner core of nothing. And this 'nothing' is exactly what makes the bubble so special. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without
High-level protection against wind noise for lavalier mics in the open air. Reduces lavalier microphone noise and clothes rustle. Designed for use with Lavalier microphones worn on the outside of clothing. It is suitable for use in windy outdoor interview conditions, and greatly reduces microphone
Best in the industry wind protection thanks to the bubble-effect in the design. The construction of the Windbubble holds a quiet space around the mic capsule, allowing it to perform its duties in the best way possible and delivering detailed and natural sound to your transmitter or recorder. They
The RODE WS7 Deluxe Windshield is an easy to use high-performance windshield for shotgun microphones. Designed to reduce wind noise when recording in adverse environmental conditions, the WS7 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A
Windshield for 6 mm pre-polarized omnidirectional microphone Audix TM1. | Made in: China
Wind protection for the TLM 102 microphone. The diameter of the wind protection is 80 mm. It is produced in black. Foam wind shields prevent disturbing sounds that arise from wind, rapid movements of the microphone pole or sensing from a short distance. They are made of special foam (polyurethane
The RODE WS6 Deluxe Windshield is an easy to use high-performance windshield for shotgun microphones. Designed to reduce wind noise when recording in adverse environmental conditions, the WS7 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A
Stainless steel parallelogram arm for windshield wipers. Length: 432 or 560 mm. | Length: 432/560 mm | Colour: Silver | Made in: China
Windscreen reduces unwanted breath and wind noise while using the SM7, SM7A, and SM7B microphones. | Type: Windshield | Compatibility: Shure SM7B | Application: Stage;Recording;Studio
Grille replaces Beta 87 wired microphone and wireless transmitter grilles. | Compatibility: Beta 87 | Type: Windshield
Foam wind shields prevent disturbing sounds that arise from wind, rapid movements of the microphone pole or sensing from a short distance. They are made of special foam (polyurethane foam with open cells) and do not cause disturbing resonances or affect the directional characteristics of the
Foam wind shields prevent disturbing sounds that arise from wind, rapid movements of the microphone pole or sensing from a short distance. They are made of special foam (polyurethane foam with open cells) and do not cause disturbing resonances or affect the directional characteristics of the
Grille replaces SM86 and SM87A microphone grilles. | Compatible with: SM87A;SM86 | Application: Recording;Stage;Studio | Compatibility: Shure | Original Colour by Producer: Black | Type: Microphone Grille
Every microphone in the MicroLite Series is a star performer, ready to deliver great sound under the most intense conditions. Cardioid versions can be used without protection, or with the WM81 wire-mesh protection cap. The special cap protects the membrane from wind and pop noise as well as dirt,
The Hi Wind Cover 4 is designed to fit the Modular 'Mono' Windshield 4 to offer up to 35dB in wind noise reduction. It is manufactured from a durable black fleece material and is easy to fit in the field by simply sliding it over the windshield basket, secured in place with hook & loop fastener
The women's running jacket with an innovative technologies to keep the performance without compromising on comfort. It features tight-fit, ultra-lightweight design and choice of a functional fabrics for maximum freedom of movement. | Special Features: Wind Protective;Ultralight;Reflective
The Blimp Extension is an add-on component kit for the original RODE Blimp windshield system that allows the use of long shotgun microphones, including the RODE NTG8 and any shotgun with barrel length of up to 600 mm. The kit includes a 256 mm blimp extension piece, two sets of rigid silicone
Foam wind shields prevent disturbing sounds that arise from wind, rapid movements of the microphone pole or sensing from a short distance. They are made of special foam (polyurethane foam with open cells) and do not cause disturbing resonances or affect the directional characteristics of the
The Windkiller is long-haired wind protector that fits shotgun microphones from Audio-Technica, Audix, DPA, JVC, Neumann, Røde, Sanken, Schoeps, Sennheiser, Sony and others – see chart under the photos. The core of the Windkiller consists of high quality coarse foam with Bubblebee’s carefully
The Windkiller is long-haired wind protector that fits shotgun microphones from Audio-Technica, Audix, DPA, JVC, Neumann, Røde, Sanken, Schoeps, Sennheiser, Sony and others. The base of The Windkiller is constructed with specially designed rubber mount that grips unto your microphone while still
130dB SPL, frequency response: 40Hz-20kHz, high pass filter, includes windshield and stand mount. Suitable for recording strings, 200ohm impedance, status LED, 21dBA self noise, choirs and acoustic guitars. Requires 48V phantom power or 9V battery. dimensions: 225 x 33mm (LxD). Weight: 360g. 10
Ideal for vehicle windshields, the RAM-B-166-UN10U consists of a 8.38 cm diameter RAM® Twist-Lock™ suction cup base, medium length double socket arm, and the popular spring-loaded RAM® X-Grip® large phone holder. The RAM® X-Grip® features an 'X' design that expands and contracts to provide a
The BY-WS1000 is a professional windshield and suspension system designed using outdoor to prevent wind noise and shock, while it’s also available using indoor as microphone shock mount. With perfect workmanship and internal structure, it fits most shotgun microphones within 320mm length and
includes stand mount, windshield and zip pouch. dimensions: 280 x 22 x 22 mm, 131dB max SPL, battery (1.5V) or phantom powered (44V52V), condenser transducer, ideal for film/TV/video, frequency range: 20Hz20kHz, lownoise circuitry, low handling noise, Weight: 161g. 10 years Rode Warranty | Package
Complete windshield and shock mounting accessory for the RØDE NTG1, NTG2, NTG3, NTG4 and NTG4+ microphones, as well as any third party shotgun microphone up to 325mm (12 ¾”) in length. Now featuring the Rycote Lyre suspension system, it provides the ultimate in microphone suspension and
cardioid, 3pin female TQG connector, 50Hz18kHz, 952V, includes APS911 phantom adapter.windshield and clip for flute. | Package Contents: Adapter;Gig Bag;Phantom;Windscreen;Clips;Microphone | Type: Condenser | Made in: China | Frequency Range: 50 Hz - 18 kHz | Impedance: 250 Ohm | Polar Pattern:
frequency response: 20Hz20kHz, case and windshield. dimensions: 160 x 55mm. Weight: 280g, XLR connector. Includes clip, requires phantom power (1252V), 20dB pad, optional microphone holder SA61 | Impedance: 200 Ohm | Type: Condenser | Package Contents: Microphone;Windscreen;Suitcase;Holder | Frequency
The Modular Windshield Kit is the professionals' choice when maximum isolation from wind and handling noise is required.This complete modular system can be configured to allow almost any microphone to be shock-mounted and provided with varying degrees of windshielding. Components may be ordered
The Modular Windshield Kit is the professionals' choice when maximum isolation from wind and handling noise is required.This complete modular system can be configured to allow almost any microphone to be shock-mounted and provided with varying degrees of windshielding. Components may be ordered
The Modular Windshield Kit is the professionals' choice when maximum isolation from wind and handling noise is required.This complete modular system can be configured to allow almost any microphone to be shock-mounted and provided with varying degrees of windshielding. Components may be ordered
An industry standard for a variety of professional recording situations in broadcast, radio and television, Sennheiser’s MKH 416 shotgun microphone deserves the best wind and handling noise protection available.That’s why they designed the Windshield Kit, 416. Featuring genuine, patented Lyre®