Tom Holders And - the cheapest86

Zildjian ZSB Basic Drumstick Bag

Drumstick bag. Features: Our standard drumstick bag features newly adjustable floor tom loops for easy attachment, carabiner clip for holding brushes, keys or other items, and upgraded handles. Main Drumstick Compartment Capacity: 9 pairs. Dimensions (h x w x d): 46 x 20 x 2,5 cm. Colour:

Yamaha CL945B Tom-Tom Holder

Tom ball clamp for Yamaha YESS (Yamaha Enhanced Sustain System) drum mounting hardware. This hardware uses a rod clamp system that does not require putting a hole in the drum shell, so it does not influence the tonal output. This clamp features a ball and short rod for YESS short pipe and its

Yamaha TH904 Tom-Tom Holder

Double tom holder from HexRackII series that fits into a cymbal stand’s lower pipe section (except for the Yamaha CS650 and CS655) and is equipped a three-hole receiver. The tom-clamps are not included. | Made in: China

Yamaha CL940B Tom-Tom Holder

Single long tom holder for attachment of one tom drum to the Yamaha’s drum kit. | Made in: China | Material: Steel

Sonor JTH Tom-Tom Holder

Tom holder adapter for Sonor Jungle snare drum/tom drum from 600er series that is the pinnacle of SONOR hardware. It offers maximum reliability and optimum handling. Chrome plated finish. | Made in: China

Yamaha RCL500 Rack Clamp Drum Rack

Clamp for tom holder/cymbal attachment with an adapter. With the adapter: 16 mm, without the adapter: 22.2 mm. | Material: Steel | Made in: China

Gibraltar SC-LRAC Tom-Tom Holder

This clamp has a 9.5mm L-rod and twin-ratchet-angle adjustment clamps that allow precise positioning of percussion and other accessories. | Material: Steel | Made in: Taiwan

Yamaha HXTCII Drum Rack

This clamp attaches a tom clamp (CL945B, etc.) or cymbal holder (CH755, etc.) to the hex-shaped pipe and is compatible with 22.2mm diameter pipes. Its vertical angle is freely adjustable. | Material: Steel | Compatible with: Hex Rack | Made in: China

Sonor TA4000 Tom-Tom Holder

Professional, chrome-plated tom arm from 4000er series that features flexible open ball clamp and short hex rods which enable easier adjustment and rotation motion. Improved wing screw/wing nuts design enforces grip on every connection. | Made in: China

Pearl TH-88S/C Tom-Tom Holder

Tom holder with gear tilter short post that features a shorter 25mm arm for use with suspension mounting systems such as the Pearl OptiMount and I.S.S. | Made in: China

Tama J34T Drum Rack

Rack mount for L-rods, tom or cymbal holders. Fits pipes from 10.5mm to 28.6mm in diameter. | Made in: China | Material: Steel

Mapex MSSTC Tom-Tom Holder

The SONIClear Tom Holder is the standard attachment mechanism for all Saturn V rack toms.Features:The low- mass bridge preserves vibration in the head and shell, enhancing resonance and increasing tonal clarity.The spring-hinged adjustable clampwith position markings accommodates tube diameters

DW SMTA12 Rack System Tom Arm Tom-Tom Holder

Rack L-Arm for tom tom 1/2'' to 12,7 mm tom arm with memory lock. Finish: Chrome. | Made in: Taiwan

Tama MTH900AS Single Tom-Tom Holder

Adapter for single Tom drum. It is characterized by high stability, it uses Tama Omni-ball system, which allows you to set the drum in any angle. Drum setting is possible with a single motion. Colour: Chrome. | Made in: China

Yamaha TPCL500 Pad Holder

The TPCL500 is great for adding an extra tom pad to your tube-style electronic drum rack system (excludes HexRack). The clamp and holder are both included to expand your DTX series kit. | Made in: China

Mapex MSSTCEB Tom-Tom Holder

The SONIClear Tom Holder is the standard attachment mechanism for all Saturn V rack toms.Features:The low- mass bridge preserves vibration in the head and shell, enhancing resonance and increasing tonal clarity.The spring-hinged adjustable clampwith position markings accommodates tube diameters

Mapex MSSTCBC Tom-Tom Holder

The SONIClear Tom Holder is the standard attachment mechanism for all Saturn V rack toms.Features:The low- mass bridge preserves vibration in the head and shell, enhancing resonance and increasing tonal clarity.The spring-hinged adjustable clampwith position markings accommodates tube diameters

PDP by DW PDAXTA105 Tom-Tom Holder

Sonor TA678MC Tom-Tom Holder

Drum hardwareTOM holder. Series 600, Tom Arm with through hook. | Made in: China

DW SMTA212 Rack System Tom Arm Tom-Tom Holder

Rack L-Arm for tom tom 1/2'' to 1/2'' mm tom arm with memory lock. Set of Two. Finish: Chrome. | Made in: USA

PDP by DW PDAX991 Tom-Tom Holder

Tom Holder. To fit a tom on a stand. With ball joint. To screw on at almost each customary cymbal stand. L-arm 12,7mm. Colour: Chrome. | Made in: China | Material: Steel

PDP by DW PDAX991 Tom-Tom Holder

Tom Holder. To fit a tom on a stand. With ball joint. To screw on at almost each customary cymbal stand. L-arm 12,7mm. Colour: Chrome. | Made in: China | Material: Steel

Tama MC69 Tom-Tom Holder

Single Tom attachment clamp. It can be mounted on stands with 15.1 - 28.6 mm diameter base section tubing. It has compact design and Omni-ball patented angle adjustment. Colour: Chrome. | Made in: China | Material: Steel

DW SMTA905 Rack System Tom Arm Tom-Tom Holder

Rack L-Arm for tom tom 1/2'' to 1/2'' mm tom arm with memory lock. Finish: Chrome. | Made in: Taiwan

Pearl TH-900S/C Tom-Tom Holder

The 900 Series hardware provides the ultimate combination of rugged durability and innovative functionality. The 900 Series Tom Holders features Uni-Lock tilter with new advanced styling. Pearl's dual-action Uni-Lock system has full 180 degree up/down and 360 degree left/right motion for

Tama MTH50S Tom-Tom Holder

Tama MTH50S has hexagonal L-rods with memory locks for the toms, and the omni-sphere also has a hexagonal rod into the T-bar for height adjustment. | Made in: China | Material: Steel

Tama MBMSCPN

Tama base mount for MTH909 double tom holder. | Material: Steel | Made in: China

Sonor STH-4000 Tom-Tom Holder

Professional, road-ready hardware at an unbeatable price. Equipped with lots of individual components, the 4000 Series is easy to set up, adjust and tear down. | Made in: China

Mapex TH687S Tom-Tom Holder

Single tom holder with ball joint, short, universal. With memory sleeve on Mars Birch, Mars Maple, Mars, Armory, Saturn (IV and later), Black Panther Concept kit toms. Tube diameter 22.2mm, chrome. | Original Colour by Producer: Smokey Chrome | Material: Steel

Tama OA29 Octaban Holder Tom-Tom Stand

The upper part of the fixed stand HOW29W for two octobans. | Made in: Japan

Yamaha TH945B Tom-Tom Holder

Tom holder with threehole receiver that comes supplied with two Yamaha CL945 tom clamps for user with Yamaha YESS mounts. | Made in: China | Material: Steel

Tama MBMSCPBNN

Tama base mount for MTH909 double tom holder. | Made in: China | Material: Steel

Mapex TH653 Tom-Tom Holder

Single tom holder for horizon/voyager 1' tube. Simple functionality and multi-purpose adaptability allow all players to add single items to standard kits or create vast and instricate setups. Features Ball-in-Sockett tilter. | Made in: China

DW SM991 Tom-Tom Holder

Tom Holder. To fit a tom on a stand. With ball joint. To screw on at almost each customary cymbal stand. L-arm 1/2“. Colour: Chrome. | Made in: Taiwan | Material: Steel

Mapex TH687SB Tom-Tom Holder

Single tom holder for Saturn Black Chrome with 1'' tube. | Material: Steel | Made in: China

Sonor STH674 Tom-Tom Holder

hardware: 600 series, Single Tom Holder | Made in: China

Tama MTH900BM Single Tom-Tom Holder

The lower section of the MTH900M acts as a single tom holder. By removing the plastic cap, you can insert a 19.1mm diameter tube like that of the CA30EN cymbal holder for more varied set-up configurations.Omni-Ball Tom Angle AdjustmentWith its rock solid stability, TAMA's Omni-ball system has been

Pearl BC-930 Cymbal Boom Stand

Shorter tom holder from the Gear 99 series that features a wing-nut tilter, used on bass drum. It has a shorter 25mm arm for use with suspension mounting systems such as the Pearl OptiMount and I.S.S. | Made in: China | Material: Steel

Tama MTH600 Omni-ball Tom-Tom Holder

Double tom holder that features a simple and practical design, featuring omni-ball system allowing for unparalleled angle adjustment of the toms by simply loosening one T-nut. The holder also features 25.4mm diameter bass section tubing. Chrome finish. | Made in: China

Sonor DTH-4000 Tom-Tom Holder

Professional, road-ready hardware at an unbeatable price. Equipped with lots of individual components, the 4000 Series is easy to set up, adjust and tear down. | Made in: China

Mapex TH656 Tom-Tom Holder

Double tom holder for Voyager with 1'' tube. Simple functionality and multi-purpose adaptability allow all players to add single items to standard kits or create vast and instricate setups. Features Ball-in-Sockett tilters. | Made in: China

Tama MTH600BN Tom-Tom Holder

A simple and practical design featuring the TAMA Omni-Ball system allows almost any angle to be achieved by simply loosening one T-nut. With its rock solid stability, TAMA's Omni-ball system has been acclaimed by pro drummers for well over twenty years. | Made in: China | Material: Steel

DW SM992 Tom-Tom Holder

Tom Holder. To fit 2 toms on a stand. With ball joint. Colour: Chrome. | Material: Steel | Made in: Taiwan

Mapex TH652EB Tom-Tom Holder

Double tom holder for bass drum, for Mars or Armory series, integrated hole for B74 cymbal arm with plug, bottom tube diameter is 25.4mm, ball joints, hexagon mandrel. | Material: Steel | Original Colour by Producer: Black | Compatible with: Mapex Storm Series

Mapex TH652 Tom-Tom Holder

Double tom holder for bass drum, for Mars or Armory series, integrated hole for B74 cymbal arm with plug, bottom tube diameter is 25.4mm, ball joints, hexagon mandrel. | Original Colour by Producer: Chrome | Material: Steel

Sonor DTH675 Tom-Tom Holder

hardware: 600 series, Double Tom Holder | Made in: China

Mapex TH676 Tom-Tom Holder

Double tom holder for Meridian with 1'' tube. Simple functionality and multi-purpose adaptability allow all players to add single items to standard kits or create vast and instricate setups. Features Ball-in-Sockett tilters. | Made in: China

DW SMMG991 Tom-Tom Holder

Tom Holder. To fit a tom on a stand. With ball joint. Colour: Chrome. | Made in: Taiwan

Tama MTH909BN Tom-Tom Holder

Double tom holder that expands setting flexibility for by employing a sliding connector unit that moves back and forth without restriction up to 50mm, so played can simply loosen a bolt in order to easily adjust the proximity of the toms. It is also equipped an omni-ball system allowing for

Mapex TH676EB Tom-Tom Holder

Simple functionality and multi-purpose adaptability allow all players to add single items to standard kits or create vast and instricate setups. Ball-in-Sockett Tilters. | Original Colour by Producer: Black | Material: Steel

Tama MTH50 Tom-Tom Holder

Tama MTH50 has hexagonal L-rods with memory locks for the toms, and the omni-sphere also has a hexagonal rod into the T-bar for height adjustment. | Made in: Japan | Material: Steel

DW SM7771 Bass Drum Tom-Tom Holder

Bass drum Tom holder. Vintage style Banana bass drum mount. For fitting a tom on a bass drum. L-tom arm moveable. L-arm diameter 1/2“. Colour: Chrome. | Made in: USA

Tama MTH900BS Tom-Tom Holder

Single tom holder that features a simple and practical design, featuring omni-ball system allowing for unparalleled angle adjustment of the tom by simply loosening one T-nut. The holder also features 25.4mm diameter bass section tubing. Chrome finish. | Made in: China

Tama MTH905N Tom-Tom Holder

Double tom holder that expands setting flexibility for by employing a sliding connector unit that moves back and forth without restriction up to 50mm, so played can simply loosen a bolt in order to easily adjust the proximity of the toms. It is also equipped an omni-ball system allowing for

Tama MTH800 Tom-Tom Holder

TAMA's MTH800 Double tom holder features 10.5mm arms and ball/socket design for multi positioning and locked-in stability. Additional positioning is achieved through TAMA's unique single Swivel Wing, which rotates to provide exact ergonomic placement. | Material: Steel | Made in: China

Tama HOW29WN Octoban Stand For 2 Pcs Tom-Tom Stand

Octoban holder for 2 pieces of Octobans. Features pipe diameter of 22.2 mm, rubber feet and chrome hardware. | Variant: 2 | Made in: China

Tama HOW49WN Octoban Stand For 4 Pcs Tom-Tom Stand

Octoban holder for 4 pieces of Octobans. Features pipe diameter of 22.2 mm, rubber feet and chrome hardware. | Made in: China | Variant: 4

Tama MTH1000SBN Single Tom-Tom Holder

This tom holder features our omni-ball system allowing for unparalleled angle adjustment of the toms. In addition, each ball can move around an arc backward and forward by 100 mm, providing even greater positioning flexibility. | Made in: China | Material: Nickel

DW 9991BDCR Bass Drum Tom-Tom Holder

Bass drum Tom holder. For fitting a tom on a bass drum. L-tom arm with ball joint. Integrated multi clamp for attachment of a cymbal arm. Movable tom holder on bass drum. L-arm diameter 1/2“. Colour: Chrome. | Made in: USA

DW SMMG992 Tom-Tom Holder

Tom Holder. To fit 2 toms on a stand. With ball joint. Colour: Chrome. | Made in: Taiwan

Tama MTH1000S Tom-Tom Holder

This tom holder features omni-ball system allowing for unparalleled angle adjustment of the toms. In addition, each ball can move around an arc backward and forward by 100mm, providing even greater positioning flexibility. | Made in: China | Material: Steel

Tama MTH1000U Tom-Tom Holder

This tom holder features omni-ball system allowing for unparalleled angle adjustment of the toms. In addition, each ball can move around an arc backward and forward by 100mm, providing even greater positioning flexibility. | Material: Steel | Made in: China

Tama MTH1000BN Tom-Tom Holder

This tom holder features omni-ball system allowing for unparalleled angle adjustment of the toms. In addition, each ball can move around an arc backward and forward by 100mm, providing even greater positioning flexibility. | Made in: China | Material: Steel

Mapex TH682 Tom-Tom Holder

Double tom holder and arm set for Saturn SW series with 1'' tube. Simple functionality and multi-purpose adaptability allow all players to add single items to standard kits or create vast and instricate setups. Features Ball-in-Sockett tilters, 25.4mm-1' / 22.2mm-.87 of an inch and memory

Tama MTH1000 Omni-ball Tom-Tom Holder

Double tom holder that features patented omni-ball system allowing for unparalleled angle adjustment of the toms. In addition, each ball can move around an arc backward and forward by 100 mm, providing even greater positioning flexibility. The holder features 25.4mm diameter bass section tubing

Roland DCS-10

The DCS-10 is a telescopic cymbal stand with a built-in tom holder. While originally developed for the V-Drums Acoustic Design series, it’s equally at home with V-Cymbals and V-Pads in other V-Drums kits. It features three double-braced legs for stability, and offers a heavy-duty chrome finish

Mapex TH692B Tom-Tom Holder

Simple functionality and multi-purpose adaptability allow all players to add single items to standard kits or create vast and instricate setups. Saturn Series Hardware. | Material: Steel | Original Colour by Producer: Smokey Chrome

TOM FORD - Leather Card Holder

logo-print leather cardholder from TOM FORD featuring black, calf leather, grained texture, logo print to the front and card slots. This item is in size UNI and the color is

Mapex TS960A Combined Cymbal Stand

The combined stand TS960A contains 1 x cymbal arm (ball joint, OS) and 1 x tom holder (ball joint). The position of the tom holder and cymbal arm is interchangeable. The stand has reinforced double legs for greater stability. | Made in: China | Material: Steel

Mapex THBMN2016A BD Tom-Tom Holder

Tom mounting system for Saturn & Saturn Evolution 20' x 16' bass drum. This system allows for mounting toms on a bass drum without requiring a permanent solution. | Material: Steel | Compatible with: Mapex Saturn Evolution Series;Mapex Saturn Series | Variant: 20x16' | Original Colour by Producer: Chrome

Mapex THBMN2018A BD Tom-Tom Holder

Tom mounting system for Saturn & Saturn Evolution 20' x 18' bass drum. This system allows for mounting toms on a bass drum without requiring a permanent solution. | Compatible with: Mapex Saturn Series;Mapex Saturn Evolution Series | Variant: 20x18' | Original Colour by Producer: Chrome | Material: Steel

Mapex THBMN2216A BD Tom-Tom Holder

Tom mounting system for Saturn & Saturn Evolution 22' x 16' bass drum. This system allows for mounting toms on a bass drum without requiring a permanent solution. | Material: Steel | Original Colour by Producer: Chrome | Compatible with: Mapex Saturn Series;Mapex Saturn Evolution Series | Variant: 22x16'

Mapex THBMN2218A BD Tom-Tom Holder

Tom mounting system for Saturn & Saturn Evolution 22' x 18' bass drum. This system allows for mounting toms on a bass drum without requiring a permanent solution. | Original Colour by Producer: Chrome | Compatible with: Mapex Saturn Evolution Series;Mapex Saturn Series | Variant: 22x18' | Material: Steel

DW 9991BDBN Bass Drum Tom-Tom Holder

Bass drum Tom holder. For fitting a tom on a bass drum. L-tom arm with ball joint. Integrated multi clamp for attachment of a cymbal arm. Movable tom holder on bass drum. L-arm diameter 1/2“. Colour: Black Nickel. | Made in: USA

DW 9991BDN Bass Drum Tom-Tom Holder

Bass drum Tom holder. For fitting a tom on a bass drum. L-tom arm with ball joint. Integrated multi clamp for attachment of a cymbal arm. Movable tom holder on bass drum. L-arm diameter 1/2“. Colour: Nickel. | Made in: USA

DW 9900BDCR Bass Drum Tom-Tom Holder

Bass drum Tom holder. For fitting two toms on a bass drum. L-tom arms with ball joint. Integrated multi clamp for attachment of a cymbal arm. Movable tom holder on bass drum. L-arm diameter 1/2“. Colour: Chrome. | Made in: USA

TOM FORD - Logo Card Holder

logo-plaque leather cardholder from TOM FORD featuring black, calf leather, sheepskin, pebbled texture, logo plaque and card slots. This item is in size UNI and the color is

Tama HTW109W Star Double Tom-Tom Stand

Star double tom stand. 28.6 mm Diameter Base Section Tubing. This tom holder features our omni-ball system allowing for unparalleled angle adjustment of the toms. In addition, each ball can move around an arc backward and forward by 100mm, providing even greater positioning flexibility. Glide-Tite

DW 9900BDSC Bass Drum Tom-Tom Holder

Bass drum Tom holder. For fitting two toms on a bass drum. L-tom arms with ball joint. Integrated multi clamp for attachment of a cymbal arm. Movable tom holder on bass drum. L-arm diameter 1/2“. Colour: Satin Chrome. | Made in: USA

DW 9900BDBN Bass Drum Tom-Tom Holder

Bass drum Tom holder. For fitting two toms on a bass drum. L-tom arms with ball joint. Integrated multi clamp for attachment of a cymbal arm. Movable tom holder on bass drum. L-arm diameter 1/2“. Colour: Black Nickel. | Material: Steel | Made in: USA

DW 9900BDN Bass Drum Tom-Tom Holder

Bass drum Tom holder. For fitting two toms on a bass drum. L-tom arms with ball joint. Integrated multi clamp for attachment of a cymbal arm. Movable tom holder on bass drum. L-arm diameter 1/2“. Colour: Nickel. | Made in: USA

Mapex TS965A Combined Cymbal Stand

The combined stand TS965A contains 2 x cymbal arm (ball joint, OS) and 1 x tom holder (ball joint). The position of the tom holder and cymbal arms is interchangeable. The stand has reinforced double legs for greater stability. | Material: Steel | Made in: China

Tama HTC107W Star Tom/Cymbal Combined Cymbal Stand

Combination tom/cymbal stand from STAR series that features patented Swivel-Wing tom holder with omni-ball system for unparalleled angle adjustment of the toms, and 300mm long boom arm for cymbal with Orbital Quick-Tite cymbal and boom tilters for extremely easy and quick adjustment of the cymbal

DW 9900BDGO Bass Drum Tom-Tom Holder

Bass drum Tom holder. For fitting two toms on a bass drum. L-tom arms with ball joint. Integrated multi clamp for attachment of a cymbal arm. Movable tom holder on bass drum. L-arm diameter 1/2“. Colour: Gold. | Made in: USA

DW 9991BDGO Bass Drum Tom-Tom Holder

Bass drum Tom holder. For fitting a tom on a bass drum. L-tom arm with ball joint. Integrated multi clamp for attachment of a cymbal arm. Movable tom holder on bass drum. L-arm diameter 1/2“. Colour: Gold. | Made in: USA

Shure DMK57-52 Microphone Set for Drums

Complete set of drum microphones: BETA 52 (Bass Drum), 3 x SM57 (Snare, Toms), 3 x A56D holder (holders) + case