Are you looking for products from the group Subwoofers? You are in the right place! The best products in the category Subwoofers for the year 2024 you can choose from 202 products from 42 brands. Products from the group Subwoofers are available from brands, for example Electro Voice, AudioQuest, Subwoofers Q Acoustics, Monkey Banana, Yamaha, Subwoofers Bose, Eagle Cable, Konig & Meyer, Subwoofers RCF a Eve Audio. All brands
Did you know that the most expensive products from the group Subwoofers they can cost even more than 1 400? If you are interested in more affordable, prepare around 705. The cheapest products from the group Subwoofers can be bought for 19. The choice is yours!
The largest range of products is available in colors Black, White, Red, Transparent, Grey a Brown. All colors
Among the most represented materials there are OFC, oxygen free copper, Steel, Polyethylene, MDF, Nylon, Textile, Cordura, Plywood Housing alebo Foam 600D Polyester Nylon. All materials
The largest range of products is available in eshops a Muziker.uk. All eshops
Products from the category Subwoofers are not the only ones you can find here. Try using search and choose from a wide range of products for the home, workshop, garden or business.
Steel telescopic speaker pole with adjustable height, ideal for connecting subwoofers and satellite. Pole is equipped with steel safety pin to prevent collapse. Diameter of the pole in the contact surface area: 35 mm. Adjustable height: 8001340 mm, maximum load capacity: 50 kg. Black colour. | Made
The Star audio mono-sub cable reduces sound loss with its dense shielding and thick inner conductor. The 24c gold-plated metal plugs preserve low transient resistance. | Type: Analog | Connector Material: Gold plated | Length (cm): 200.0 | Material: OFC - oxygen free copper | Made in: China | Braid Jacket:
The Star audio mono-sub cable reduces sound loss with its dense shielding and thick inner conductor. The 24c gold-plated metal plugs preserve low transient resistance. | Type-B Connector: RCA Cinch Male | Colour: Transparent | Type-A Connector: RCA Cinch Male | Connector Angle: Straight - Straight | Type:
The Star audio Y-sub cable reduces sound loss with its dense shielding and thick inner conductor. The 24c gold-plated metal plugs preserve low transient resistance. | Length: 2 m | Braid Jacket: Copper | Type-A Connector: RCA Cinch Male | Connector Material: Gold plated | Type-B Connector: RCA Cinch
High quality audio connecting cable made of the purest oxygen-free copper. It can be used in 2.1 systems as well as in home cinema. Fabric braiding for optimal protection. High quality gold-plated RCA connectors. Available in lengths of 3; 6 to 9 m. | Braid Jacket: Copper | Colour: Black | Length (cm):
Adapter stand, a 35 mm pole to mount satellite speakers on subwoofers. The heavy duty construction of powder coated steel is height adjustable from 82 to 140 cm. The SP 3332 B features an 35 mm bottom end and steel collar with set screw and safety pin to lock the extension pole in place. It comes
Adjustable speaker pole for speaker-subwoofer separation with terminal pieces Ø 35 mm. Supplied with a bolt locking mechanism incorporating a steel pin for extra safety. Adjustment: 825 - 1320 mm. Available in matt black. | Height Adjustable: Yes | Material: Steel | Made in: China | Load Capacity: 50
Transport Cover for Avante AS8 Active Subwoofer. | Height (cm): 355.0 | Made in: China | Suitable for: Avante AS8 | Colour: Black | Width (cm): 381.0 | Padding: Yes
Preassembled Y-subwoofer cable for connecting active subwoofers to home-cinema systems! Just the thing for connecting active subwoofers (stereo input) to AV receivers (mono output). The inner conductor´s large diameter and the coaxial design mean that this Oehlbach cable is particularly suitable
The Premium mono-sub cable features impressive with conductors made of high-purity OFC copper, solid metal plugs and 24c gold-plated contacts. The double shielding protects against interference. | Connector Angle: Straight - Straight | Wired Diameter: 6 mm | Connector Material: Gold plated | Colour:
Adapter stand, a 35 mm pole to mount satellite speakers on subwoofers. The heavy duty construction of powder coated steel is height adjustable from 105 to 140 cm. The SP 3332 TPB features an 35 mm bottom end and steel collar with safety pin to securely lock the extension pole in place. The base
Connecting audio cable for subwoofer, mono, gold-plated male connectors: 3 × cinch (RCA), shielded cable and metal body, straight termination. | Braid Jacket: PVC | Connector Angle: Straight - Straight | Type-A Connector: RCA Cinch Male | Type-B Connector: RCA Cinch Male | Material: OFC - oxygen free
The Premium Y-sub cable features impressive with conductors made of high-purity OFC copper, solid metal plugs and 24c gold-plated contacts. The double shielding protects against interference. | Connector Angle: Straight - Straight | Material: OFC - oxygen free copper | Braid Jacket: Copper | Type-B
Preassembled Y-subwoofer cable for connecting active subwoofers to home-cinema systems! Just the thing for connecting active subwoofers (stereo input) to AV receivers (mono output). The inner conductor´s large diameter and the coaxial design mean that this Oehlbach cable is particularly suitable
With the Oehlbach Select Sub Link cable your active subwoofer gets the optimal connection to your home cinema or home entertainment. It is available in various lengths and can also be used in the car for connecting bass rollers or power amplifiers. For all cases, we have developed an oxygen-free
High quality audio connecting cable made of the purest oxygen-free copper. It can be used in 2.1 systems as well as in home cinema. Fabric braiding for optimal protection. High quality gold-plated RCA connectors. Available in lengths of 3; 6 to 9 m. | Type-B Connector: RCA Cinch Male | Length: 6
The Star audio Y-sub cable reduces sound loss with its dense shielding and thick inner conductor. The 24c gold-plated metal plugs preserve low transient resistance. | Connector Angle: Straight - Straight | Colour: Transparent | Connector Material: Gold plated | Wired Diameter: 6 mm | Braid Jacket:
The Premium mono-sub cable features impressive with conductors made of high-purity OFC copper, solid metal plugs and 24c gold-plated contacts. The double shielding protects against interference. | Connector Angle: Straight - Straight | Type-A Connector: RCA Cinch Male | Type-B Connector: RCA Cinch
Adjustable speaker pole for speaker-subwoofer separation with screw-mount bottom terminal piece (supplied with screw M20 x 2.5). It features a bolt locking mechanism incorporating a steel pin for extra safety. Adjustment: 735 - 1230 mm. Available in matt black. | Load Capacity: 50 kg | Diameter (mm):
High quality audio connecting cable made of the purest oxygen-free copper. It can be used in 2.1 systems as well as in home cinema. Fabric braiding for optimal protection. High quality gold-plated RCA connectors. Available in lengths of 3; 6 to 9 m. | Length: 9 m | Colour: Black | Made in: Germany | Braid
Cover for Montarbo R series speakers, which protects the speakers from damage during transport. The cases have holes on the handle, which is comfortable to carry and are made of waterproof material. | Compatible with: R 18s | Zip: Yes | Variant: CV-R18S | Type: Cover | Made in: China | Colour: Black
Hard textile transport case for safe transport of the Italian Stage subwoofer. Suitable for IS S115A subwoofer. | Material: Textile | Width (cm): 47.0 | Depth (cm): 47.0 | Padding: None | Type: Cover | Colour: Black | Height (cm): 57.0 | Suitable for: Italian Stage S115A | Zip: No | Variant: COVERS115 | Made in: Italy
Adapter stand, a 35 mm pole to mount satellite speakers on subwoofers. The heavy duty construction of powder coated steel is height adjustable from 105 to 140 cm. The SP 2332 TPB features an M20 bottom end and steel collar with safety pin to securely lock the extension pole in place. The base tube
Protective padded cover for Alto TX212S. | | Made in: China
Replacement Hi-Fi bass-midrange 8' speaker with 70W output at 8 Ohms that is designed to be used in closed or transmission line cabinets. It features a coated low-resonance paper cone with 3.15' magnet and 1' former aluminium voice coil, as well as a long-term stable rubber surround. It requires a
Connecting audio cable for subwoofer, mono, gold-plated male connectors: 3 × cinch (RCA), shielded cable and metal body, straight termination. | Shielding: 2-fold | Made in: China | Colour: Black | Connector Material: Gold plated | Length (cm): 500.0 | Length: 5 m | Type: Analog | Type-A Connector: RCA Cinch
Connecting audio cable for subwoofer, gold-plated male connectors: 3 × cinch (RCA), shielded cable and metal body, straight termination. | Braid Jacket: PVC | Type-B Connector: RCA Cinch Male | Connector Angle: Straight - Straight | Type-A Connector: RCA Cinch Male | Material: OFC - oxygen free copper | Made
Accessories for subwoofers. Steel tube combination for use in subwoofers with flange adapter. The height is fixed with a safety hook and secured by a clamping screw for a vibration-free and firm fit. The slim design of the clamp allows space-saving transport and ensures a stylish appearance. The
Whells for Avante A15S and A18S subwoofers. 4x wheels with brake | Made in: China
Hard textile transport case for safe transport Subwoofer Italian Stage. Suitable for IS S118A subwoofer. | Colour: Black | Height (cm): 62.0 | Width (cm): 53.0 | Made in: Italy | Type: Cover | Suitable for: Italian Stage S118A | Padding: None | Depth (cm): 85.0 | Variant: COVERS118 | Zip: No | Material: Textile
The Star audio mono-sub cable reduces sound loss with its dense shielding and thick inner conductor. The 24c gold-plated metal plugs preserve low transient resistance. | Colour: Transparent | Connector Angle: Straight - Straight | Length (cm): 1200.0 | Made in: China | Material: OFC - oxygen free
Cover for Montarbo R series speakers, which protects the speakers from damage during transport. The cases have holes on the handle, which is comfortable to carry and are made of waterproof material. | Colour: Black | Type: Cover | Made in: China | Variant: CV-R15S | Zip: Yes | Compatible with: R 15s
With the Oehlbach Select Sub Link cable your active subwoofer gets the optimal connection to your home cinema or home entertainment. It is available in various lengths and can also be used in the car for connecting bass rollers or power amplifiers. For all cases, we have developed an oxygen-free
Carrying case for X-SUB 115SA. | Colour: Black | Material: Nylon | Suitable for: X-SUB 115SA
The Star audio mono-sub cable reduces sound loss with its dense shielding and thick inner conductor. The 24c gold-plated metal plugs preserve low transient resistance. | Colour: Transparent | Connector Angle: Straight - Straight | Length: 10 m | Type-B Connector: RCA Cinch Male | Length (cm): 1000.0 | Made
The Premium mono-sub cable features impressive with conductors made of high-purity OFC copper, solid metal plugs and 24c gold-plated contacts. The double shielding protects against interference. | Connector Angle: Straight - Straight | Length (cm): 500.0 | Wired Diameter: 6 mm | Type: Analog | Type-B
The Premium Y-sub cable features impressive with conductors made of high-purity OFC copper, solid metal plugs and 24c gold-plated contacts. The double shielding protects against interference. | Wired Diameter: 6 mm | Material: OFC - oxygen free copper | Braid Jacket: Copper | Type-B Connector: RCA Cinch
With Oxygen-Free Copper conductors in Wireworld’s new Tri DNA Helix cable design, Luna 8 provides superior impact and expressive dynamics, while the superior Composilex 3 insulation improves focus and clarity. The upgrade to Composilex 3 in Series 8 interconnects improves tonal purity and image
Connecting audio cable for subwoofer, gold-plated male connectors: 3 × cinch (RCA), shielded cable and metal body, straight termination. | Shielding: 2-fold | Type: Analog | Length (cm): 500.0 | Made in: China | Length: 5 m | Connector Material: Gold plated | Colour: Black | Braid Jacket: PVC | Material: OFC -
Accessories for subwoofers. Steel tube combination for use in subwoofers with M20 connection. The height is fixed with a safety hook and secured by a clamping screw for a vibration-free and firm fit. The slim design of the clamp allows space-saving transport and ensures a stylish appearance. The
Protective Cover suitable for subwoofer. Cover protects the TS12S from dust, scratches, and soft contact. Material: Cordura - robust, abrasion-resistant, water-repellent. Easy slip-on design - cover and uncover in seconds. Strap with velcro patch to cover in place. Side openings for easy access to
Cover for SUBline 112 Series made from hard wearing wipeable nylon, this soft lined padded cover will protect the SUBline 112 while on the road. | Water Resistance: No | Material: Nylon | Padding: None | Type: Dust Cover | Suitable for: FBT Subline 112 | Colour: Black
METAL-LAYER NOISE-DISSIPATIONIt's easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component
The Q 60WB Subwoofer Wall Bracket is designed and sonically optimised for wall mounting the 3060S and 7060S. Wall-mounting a subwoofer not only reinforces it’s deep bass performance but gets it of the floor where it could be toppled by pets and children. Cable access is from below so discrete
Deluxe water resistant protective cover for power stand subwoofer iP1000. Rugged black multi-layer nylon outer material prevents ingress of dirt and dust. Thick interior foam padding provides superior protection in transit. Openings in cover allow access to built-in cabinet handles. | Made in: China
Steel tube combination for use in subwoofers with M20 connection. The height is fixed with a safety hook and secured by a clamping screw for a vibration-free and firm fit. The slim design of the clamp allows space-saving transport and ensures a stylish appearance. The usable height is between 900
Excellently made preassembled subwoofer cable for connecting active subwoofers to home-cinema systems! Just the thing for connecting active subwoofers to AV receivers. The inner conductor´s large diameter and the coaxial design mean that this Oehlbach cable is particularly suitable for the
With Oxygen-Free Copper conductors in Wireworld’s new Tri DNA Helix cable design, Luna 8 provides superior impact and expressive dynamics, while the superior Composilex 3 insulation improves focus and clarity. The upgrade to Composilex 3 in Series 8 interconnects improves tonal purity and image
METAL-LAYER NOISE-DISSIPATIONIt's easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component
Protective cover for Evolve 50 and Evolve 50 M subwoofers. | Material: Polyester | Type: Cover | Made in: China | Colour: Black | Compatible with: Electro Voice Evolve 50 / 50 M
The Electro-Voice Cover for Evolve 30M Subwoofer is a cover designed to protect an Evolve 30M subwoofer from dust and moisture while guarding against scratches when transporting or storing at home. It features a nylon outer shell, interior padding, and cutouts for easy access to the subwoofer's
10” bass and mid-range driver that provides 97dB sensitivity and 150W RMS (AES standard) power handling and is ideally suited to compact enclosures and high pass systems. It features a ferrite magnet with 2” high-temperature copper voice coil wound on polyimide for increased reliability, rigid
Durable Mitus 118 subwoofer cover made of waterproof and strong nylon, which will protect your subwoofer during transport or storage. The cover has side openings for easier gripping of the handles and the FBT logo on the front. | Material: Nylon | Type: Cover | Compatible with: FBT Mitus 118 | Colour:
Padded cover that was specifically designed to fit and protect Electro Voice's ELX200-12S and ELX200-12SP loudspeakers. It features a hole for the handle, so the speaker can be transported while in the cover. Black colour design. | Made in: China
Padded cover that was specifically designed to fit and protect Electro Voice's ELX200-12S and ELX200-12SP loudspeakers. It features a hole for the handle, so the speaker can be transported while in the cover. Black colour design. | Made in: China
Steel tube combination for use in subwoofers with flange adapter. The height is fixed with a safety hook and secured by a clamping screw for a vibration-free and firm fit. The slim design of the clamp allows space-saving transport and ensures a stylish appearance. The usable height is between 1,005
METAL-LAYER NOISE-DISSIPATIONIt's easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component
Compact PA bass speaker, subwoofer, 150 W, 8 Ω20 cm (8') bass speaker and subwoofer of high power capabilityHeat-resistant voice coil and ventilated drive systemExtra long excursion for a deep bass reproduction of high volumesProgressive cone suspension for a high operating reliabilityRobust
Powerful PA speaker systems call for Turbosound drivers, which are designed to bring out the best audio performance no matter the genre or application. The 10” TS-10W300/8A low frequency driver provides tight and punchy bass performance and handles up to 1,200 Watts of peak output (300 Watts
ZX1 Sub and ZX A1 Sub subwoofer cover. | Made in: China
The Celestion BL10 100 speaker is a subwoofer with a diameter of 10 'and a power of 100 W. It can be used in harder styles. It provides overdrive underlined but dense sound. It works in the 75Hz6kHz frequency band at a sensitivity of 94dB and an impedance of 8 Ohm. | Sensitivity (dB): 96.0 | Impedance:
A new Tri-DNA Helix design, Solstice 8’s silver-plated Oxygen-Free Copper conductors and Composilex 3 insulation improve reproduction of musical detail and expression. Gold Tube RCA plugs have a smooth firm grip and the highest conductivity in their class. Ideal for smaller systems and custom
Padded protective cover for EKX-15S and 15SP Series loudspeakers. The cover is made from tough and durable nylon in black color. | Made in: China
Nylon cover with wheels that was designed specifically for the FBT Q 118SA subwoofer. Black colour
SOLID .5% SILVER CONDUCTORS FOR IMPROVED SUBWOOFER PERFORMANCESolid .5% Silver-Plated Copper Conductors: A superbly cost-effective way to maximize a video or digital cable, harsh and horrible for full-range audio, but like turning up the “sharpness” for a subwoofer, enhancing articulation and
Powerful PA speaker systems call for Turbosound drivers, which are designed to bring out the best audio performance no matter the genre or application. The 12” TS-12W350/8W low frequency driver provides tight and punchy bass performance and handles up to 1,400 Watts of peak output (350 Watts
Padded protective case specially made for the Electro Voice ETX-15SP subwoofer. The cover is made of durable black nylon with the Electro Voice logo. In addition, it is equipped with reinforced holes for handles. | Made in: China
For bass players demanding well-defined clarity and stunning articulationtogether with a rich, full tone, PULSE12 bass speakers deliver an idealcombination of responsiveness and rock solid low end. The Kevlar-loaded conepulses with up to 200 watts of raw bass power. Expect each note to deliver
Excellently made preassembled subwoofer cable for connecting active subwoofers to home-cinema systems! Just the thing for connecting active subwoofers to AV receivers. The inner conductor´s large diameter and the coaxial design mean that this Oehlbach cable is particularly suitable for the
Durable protective bag for Bose F1 subwoofer. Dimensions: 10,16 x 73,66 x 43,18 cm. Colour: Black | Made in: China
A durable case for carrying and storing your Mackie speaker. Protect your investment with durable speaker covers that help protect your equipment from shipping and storage damage. | Suitable for: Mackie Thump 118S | Made in: China | Type: Bag | Colour: Black
SOLID .5% SILVER CONDUCTORS FOR IMPROVED SUBWOOFER PERFORMANCESolid .5% Silver-Plated Copper Conductors: A superbly cost-effective way to maximize a video or digital cable, harsh and horrible for full-range audio, but like turning up the “sharpness” for a subwoofer, enhancing articulation and
The EKX-18S-CVR is a padded cover for EKX-18S and 18SP. Cover features precut spaces for handles and a big EV Logo. Color: Black. | Made in: China
Protective padded cover for active subwoofer ETX-18SP from Electro Voice. | Compatible with: ETX-18SP | Made in: China
Padded cover for SUB 702-AS MK3 loudspeakers, protects against abrasion, scratches and surface wear. Features a weather-resistant polyester outer fabric, foam rubber padding, and classic and velcro openings. The front cover can be opened and secured with Velcro on one side. The case has several
Padded cover for the RFC SUB 702-AS II active subwoofer that provides holes for handles and opening slot for pole mount, allowing the unit to be transported or used without necessity of taking the cover down. Front section of the cover can be opened via sturdy zipper and attached to the side via
Padded Cover for SUB 705-AS MK3 and SUB 905-AS MK3. It features heavy-duty weatherproof polyester outer fabric, foam rubber padding, and zip openings with Velcro fasteners. The frontal cover can be opened and blocked with velcro on one side. It features multiple openings for handles, for the rear
The 15” TS-15W300/8A low frequency driver provides tight and punchy bass performance and handles up to 1,200 Watts of peak output (300 Watts RMS), with a frequency range that extends from 46 Hz to 3 kHz. The die-cast aluminium frame is extremely rigid and light in weight, making it ideal for use
4 wheels for subwoofers. Suitable for: SUBLine 18 S/SA, SUBLine 218 S/SA, Mitus 118FS/FSA, Mitus 118S/SA, Mitus 121 S/SA a Mitus 218 S/SA. | | Type: Subwoofer
Cover for Yamaha speakers: DXS15XLF/15XLF-D, CXS15XLF. The functional speaker covers that protect speakers from unfavorable weather conditions during outdoor performances, dusty and dirty warehouse storage, or the rigors of equipment transport on the road. Trilaminar fabric of durable polyester,
2-way stereo/3-way mono crossover with subwoofer output and universal power supply. It is equipped with an internal power supply switch for worldwide operation of 100 - 240 V. In addition, it offers state-of-the-art Linkwitz-Riley filters, absolutely flat summed amplitude response, zero phase
Protection cover for subwoofer SUB 8004-AS made from high quality nylon. Black Vinyl Cover from RCF designed for carrying and protecting the SUB 8004-AS subwoofer. Protects the speaker from scratches and hits. Strong nylon construction. Color: Black. | Made in: Italy
A compact subwoofer suitable not only for mobile use. It offers 150 W RMS power, 8 Ohm impedance and 12'' woofer. The subwoofer can be combined with a wide range of satellite speakers. With a robust bassreflex design and built-in passive crossover, it offers full bass sound. The subwoofer is coated
SOLID .5% SILVER CONDUCTORS FOR IMPROVED SUBWOOFER PERFORMANCESolid .5% Silver-Plated Copper Conductors: A superbly cost-effective way to maximize a video or digital cable, harsh and horrible for full-range audio, but like turning up the “sharpness” for a subwoofer, enhancing articulation and
The SPW-1 caster kit from Yamaha installs on your DXS18 subwoofer in a snap, allowing you to move the sub quickly, easily, and safely. Radial ball bearings and quality construction keep them quiet during your performance. | Made in: China
PA and power bass speaker, 175 W, 4 Ohm. For bass and bass-midrange in medium-sized systems. Peak music power output: 350W, Frequency range: f3-4,000 Hz, Sensitivity: 93 dB/W/m, Dimensions: 305 mm x 130 mm, Weight: 3kg. | Power RMS (Watt): 175.0 | Power RMS: 175 W | Type: PA | Power: 350 W | Impedance: 4
8” dual-band plastic speaker with 8' VC 1.5 'subwoofer and 1' VC 1' driver. It offers line output XLR OUT + ¼' JACK JACK OUT and at the same time 2 inputs of which one line input XLR IN + 2 x RCA and microphone input XLR IN + ¼' JACK IN. RMS power of AB class is 120 + 30 W. Frequency response
Nylon cover for subwoofer Mitus 218SA. | | Type: Cover | Colour: Black | Compatible with: MITUS 218SA | Material: Nylon
Nylon cover for subwoofer Mitus 218SA. | | Type: Cover | Material: Nylon | Compatible with: MITUS 218SA | Colour: Black
Universal bass speaker, 150 W, 8 Ohm. For bass applications, also in power speaker systems. Peak music power output: 300W, Frequency range: f3-4,000 Hz, Sensitivity: 94 dB/W/m, Dimensions: 385 mm x 150 mm, Weight: 3,9kg. | Type: PA | Power RMS (Watt): 150.0 | Power: 300 W | Power RMS: 150 W | Power (Watt):
Functional cover designed specifically for the Yamaha DXS12mkII active subwoofer that protects the unit from unfavourable weather conditions during operation in outdoor performances, in dusty and dirty warehouse storage, or the rigors of equipment transport on the road. It is made with trilaminar
Excellently made preassembled subwoofer cable for connecting active subwoofers to home-cinema systems! Just the thing for connecting active subwoofers to AV receivers. The inner conductor´s large diameter and the coaxial design mean that this Oehlbach cable is particularly suitable for the
Deluxe padded cover for SRX828SP, water resistant black nylon exterior, 2.5mm polyethylene grille protector, covered handle access with Velcro closure, with embroidered JBL logoThe ultimate protection for your SRX828SP loudspeakerDurable 1000-D Nylon outer fabric keeps out dust & dirt, while extra
Speaker cover from Yamaha. The functional speaker covers that protect your speakers from unfavorable weather conditions during outdoor performances, dusty and dirty warehouse storage, or the rigors of equipment transport on the road. | Made in: China
Low pass filter ensures that your subwoofer only plays sounds too low for your speakers to properly output without distortion. Supplement your speakers high and mid-range with bass you can really feel down to the 38Hz range. An 8” Bass Driver with DSP delivers 70w of powerful sound with rich,
10” dual-band plastic speaker with 10' VC 1.5' subwoofer and 1' VC 1' driver. It offers line output XLR OUT + ¼' JACK JACK OUT and at the same time 2 inputs of which one line input XLR IN + 2 x RCA and microphone input XLR IN + ¼' JACK IN. RMS power of AB class is 120 + 30 W. Frequency response
SOLID .5% SILVER CONDUCTORS FOR IMPROVED SUBWOOFER PERFORMANCESolid .5% Silver-Plated Copper Conductors: A superbly cost-effective way to maximize a video or digital cable, harsh and horrible for full-range audio, but like turning up the “sharpness” for a subwoofer, enhancing articulation and
Functional cover designed specifically for the Yamaha DXS15mkII active subwoofer that protects the unit from unfavourable weather conditions during operation in outdoor performances, in dusty and dirty warehouse storage, or the rigors of equipment transport on the road. It is made with trilaminar
With the CR6S-X subwoofer, you will truly experience all the bass hits, explosions, and rumbles that you’ve been missing, and you’ll be doing it in style. A high-output, down-firing 6.5” woofer combined with a carefully tuned port provide deep, punchy bass all within a compact form factor
Twoway stereo crossover that features the addition of the subwoofer output for lowend frequency reinforcement. It employs 24dB/octave, statevariable, Fourthorder LinkwitzRiley filters that guarantee properly phased outputs at all frequencies which are optimal for the proper acoustic summing of
Compact 50W subwoofer that incorporates a number of advanced, high-performance bass technologies exclusive to Yamaha, including a twisted flare port and advanced YST II (Yamaha Active Servo Technology II). This results in sensationally clear bass response and adds a lot to the overall musical
The best subwoofer you can get to put a little boom in your room, the surprisingly loud, 100 watt Eris Sub 8BT reaches down to a molar-rattling 30 Hz, so you'll hear the full sonic spectrum and produce better mixes.The first PreSonus studio subwoofer to offer Bluetooth 5.0 wireless connectivity,
Functional speaker cover that was designed specifically for the Yamaha DXS18 subwoofer. It is made of a three-layer durable polyester fabric and features an internal PVC padding for increased protection against shocks. It also features an internal pocket for accessories and a cutaway for handle
12” dual-band plastic speaker with 12' VC 2' subwoofer and 1' VC 1' driver. It offers line output XLR OUT + ¼' JACK JACK OUT and at the same time 2 inputs of which one line input XLR IN + 2 x RCA and microphone input XLR IN + ¼' JACK IN. RMS power of AB class is 170 + 30 W. Frequency response
Cajon from the Subwoofer Cajon Series. This cajon features a forward projecting sound port in place of the traditional rear facing style and an internal reflex channel. This results in an enhanced bass note projection, particularly desirable for live and unplugged situations. Features: Super low
Powerful PA speaker systems call for Turbosound drivers, which are designed to bring out the best audio performance no matter the genre or application. The 18” TS-18SW700/8A low frequency driver provides tight and punchy bass performance and handles up to 2,800 Watts of peak output (700 Watts
Subwoofer cajon that features a forward projecting sound port in the place of the traditional rear-facing style, adjustable top corners and internal snare wires. This results in an enhanced low frequency projection, particularly desirable for live and unplugged situations. This cajon version is
Cajon from the Arch Bass Series. With curved sides in place of traditional straight edge cajon designs, the MEINL Arch Bass Cajon creates enhanced bass notes with its cavernous resonating body. The extra wide curved shape helps develop low tones to give players a boomy and punchy sound. Constructed
The CR8S-XBT 8' Creative Reference multimedia Subwoofer with Bluetooth offers 200W of powerful dedicated bass reinforcement for your studio or home. The sleek design looks great in any room and is the perfect match for any CR Series monitors. Flexible rear panel inputs and outputs include 1/4' TRS
Cajon from the Arch Bass Series. With curved sides and back in place of traditional straight edge cajon designs, the MEINL Jumbo Arch Bass Cajon creates enhanced bass notes with its cavernous resonating body. The extra wide curved shape helps develop low tones to give players a boomy and punchy
90dB | Inputs: RCA unbalanced, 3,5 mm Stereo Jack, Bluetooth | Outputs: 3,5 mm Headphone, Subwoofer-Out Chinch unbalanced, Terminal connectors | Input Impedance: 20ku2126 balanced, 10ku2126 unbalanced | Input Sensitivity: +4dBu(balanced), -10dBv(unbalanced) | Available colors: Red, Black, white | Net weight:
90dB | Inputs: RCA unbalanced, 3,5 mm Stereo Jack, Bluetooth | Outputs: 3,5 mm Headphone, Subwoofer-Out Chinch unbalanced, Terminal connectors | Input Impedance: 20ku2126 balanced, 10ku2126 unbalanced | Input Sensitivity: +4dBu(balanced), -10dBv(unbalanced) | Available colors: Red, Black, white | Net weight:
90dB | Inputs: RCA unbalanced, 3,5 mm Stereo Jack, Bluetooth | Outputs: 3,5 mm Headphone, Subwoofer-Out Chinch unbalanced, Terminal connectors | Input Impedance: 20ku2126 balanced, 10ku2126 unbalanced | Input Sensitivity: +4dBu(balanced), -10dBv(unbalanced) | Available colors: Red, Black, white | Net weight:
Your S10 perfectly matches the range of ceiling/wall speakers and sound bars from NEXT Audiocom. Improved design with an impressive performance, the S10 is an excellent option for your installation. The integrated technology Down-firing and bass reflex allows an experience of deep and defined bass
The SAT 1008 SUBA 600-Watt active subwoofer is the ultimate in low-frequency reproduction, and the built-in stereo crossover makes it ideally suited for use with any active 2-way loudspeakers. Powered by a 600-Watt Class-D amplifier, 8” long-excursion subwoofer and an incredible array of
Active ultra-linear 10' studio subwoofer with an output of 300 W and a high-excursion woofer, which was designed by Keith Klawitter, founder of KRK Systems. It features powerful amplifier with bridge mode for precise reproduction of low frequencies, 10' woofer cone with glass fiber, resistant to
Active subwoofer module for self-built subwoofer systems. Due to state-of-the-art technology in the digital D class, the digital active subwoofer module provide a powerful bass reproduction. The component feature a high power efficiency and provide an energy-saving operation. The lightweight design
Active studio subwoofer of the AKTIV series, designed for monitoring. It is equipped with a 10 'bass reflex woofer, has an amplifier power of 150W @ 100Hz, 4 Ohm, 0.1% THD, crossover frequency 50Hz - 180Hz, phase switch, input level controller, input impedance 20 kOhm balanced, 10 kOhm unbalanced
Your S10 perfectly matches the range of ceiling/wall speakers and sound bars from NEXT Audiocom. Improved design with an impressive performance, the S10 is an excellent option for your installation. The integrated technology Down-firing and bass reflex allows an experience of deep and defined bass
The actively ventilated subwoofer features a woofer with PP cone featuring very extended response, stereo balanced inputs, outputs and link connectors for MONO and STEREO operation. The advantage of the subwoofer is its optimized crossover design with HI-CUT and LO-CUT frequency control, as well as