Lowest price in the last 45 days: £ 244
Prices and availability may change several times a day. Check the current data directly in the e-shops. You can find all available colors and sizes directly in the e-shops.
The actively ventilated subwoofer features a woofer with PP cone featuring very extended response, stereo balanced inputs, outputs and link connectors for MONO and STEREO operation. The advantage of the subwoofer is its optimized crossover design with HI-CUT and LO-CUT frequency control, as well as a precisely calculated front tuning port for greater low-frequency extension. Package Contents: Manual;Power Cable Controls: Volume;Phase Switch;Hi Cut;Lo Cut Outputs: XLR Male Link Out;Balanced XLR Male LF Driver Type: PP Cone Bass Reflex Port: Yes Height (cm): 36.5 LF Driver Power Amp: Class-AB Inputs: Balanced XLR Female;Balanced Jack 6.3 mm TRS Net Weight (kg): 15.3 Speakers: 1x 10 ' Power RMS: 150W Made in: China Power: 150W Woofer: 10' Sound Pressure Level (SPL): 110 dB Type: Active Subwoofer Frequency Range: 40 Hz - 150 Hz Width (cm): 33.0 Crossover Frequency: 80 Hz - 120 Hz Depth (cm): 36.5 Sound Pressure Level - SPL (dB): 110.0 Power (Watt): 150.0 Colour: Black
Product PROEL EK10SW is marked by the EAN code 8032496464198.
Color | Black |
Category | Speakers, Extenders, Subwoofers, Cones |
EAN | 8032496464198 |
The actively ventilated subwoofer features a woofer with PP cone featuring very extended response, stereo balanced inputs, outputs and link connectors for MONO and STEREO operation. The advantage of the subwoofer is its optimized crossover design with HI-CUT and LO-CUT frequency control, as well as
Adjustable speaker pole for speaker-subwoofer separation with terminal pieces Ø 35 mm. Supplied with a bolt locking mechanism incorporating a steel pin for extra safety. Adjustment: 825 - 1320 mm. Available in matt black. | Material: Steel | Height Adjustable: Yes | Load Capacity: 50 kg | Colour:
Adjustable speaker pole for speaker-subwoofer separation with screw-mount bottom terminal piece (supplied with screw M20 x 2.5). It features a bolt locking mechanism incorporating a steel pin for extra safety. Adjustment: 735 - 1230 mm. Available in matt black. | Maximum Height: 1230 mm | Made in:
Active subwoofer. PROEL introduces the S Series, a new range of compact and powerful sub-woofers designed to complement PROEL full-range speakers. The variety of size, power and SPL offered by the four active S models provides, at an unbeatable price point, the perfect low extension solution for
Coaxial/Twin Cone. 12' twin cone drive unit with extended high frequency response. 1.75' high temperature copper voice coil for increased reliability and 100Wrms (AES standard) power handling. Optimised cone neck/voice coil assembly for increased strength, minimising high frequency distortion and
High-power 8” cone bass-reflex powered subwoofer with total output of 150 W that is exclusively designed to deliver low frequencies down to 22 Hz, with frequency range of 22 Hz-160 Hz. It features Low Cut switch, Low Cut control (80-120 Hz) and High Cut control (80-120 Hz), and Phase switch that
COMPACT BUT POWERFUL | | Active subwoofer with 200 mm cone and downfire arrangement | High-performance power amplifier with Class D technology | Active frequency response equalization | Vertical or horizontal installation | A wall restraint is available for vertical installations | Finish: Silk-matt
COMPACT BUT POWERFUL | | Active subwoofer with 200 mm cone and downfire arrangement | High-performance power amplifier with Class D technology | Active frequency response equalization | Vertical or horizontal installation | A wall restraint is available for vertical installations | Finish: Silk-matt
The Sub8 is a small yet powerful subwoofer designed to extend the low frequency capabilities of any nearfield monitoring system down to 30Hz.It houses a robust 8.5″ woofer with a 1.5″ voice coil driven by a 160W ICE power amplifier. This amp combines low heat generation with high performance to
The T10S is a powerful yet compact active subwoofer, designed to extend the bass response of any nearfield studio monitor. However, the subwoofer’s performance, features and connectivity are engineered specifically to complement ADAM Audio’s T5V and T7V speakers.Equipped with a down-firing 10˝
The Sub10 MK2 is a powerful subwoofer designed to extend the low frequency capabilities of any near or midfield monitoring system down to 25Hz.A sturdy special woofer with extended cone travel and a heavy-duty coil have been optimized for accurate reproduction from a bass reflex enclosure. The
Extend your system LF all the way down! The LSR310S subwoofer incorporates JBL’s patented Slip Stream™ Port working in concert with a custom 10' down-firing driver and a 200 Watt amplifier to add deep, powerful bass to any studio monitor system. A JBL first, the XLF Extended Low Frequency
Half-roll elastomer surround. Long excursion: 11.25mm mathematical Xmax. Glass loaded paper cone with weather-resistant impregnation.Optimised double suspension. Airflow vented magnet assembly for dynamic heat dispersion.Power Rating: Tested for two hours using a continuous, band-limited pink noise
Functional speaker cover that was designed specifically for the Yamaha DXS18 subwoofer. It is made of a three-layer durable polyester fabric and features an internal PVC padding for increased protection against shocks. It also features an internal pocket for accessories and a cutaway for handle
With the 2-way Active Systems and the Subwoofers of the SOUND Series, efficient speakers with a powerful sound are available in different sizes and with different features. They are all integrated into high-quality bass-reflex MDF cabinets and feature speakers with magnetic shielding. The speaker
Compact PA bass speaker, subwoofer, 150 W, 8 Ω20 cm (8') bass speaker and subwoofer of high power capabilityHeat-resistant voice coil and ventilated drive systemExtra long excursion for a deep bass reproduction of high volumesProgressive cone suspension for a high operating reliabilityRobust
Speaker cover from Yamaha. The functional speaker covers that protect your speakers from unfavorable weather conditions during outdoor performances, dusty and dirty warehouse storage, or the rigors of equipment transport on the road. | Made in: China
The F12M-150 is a full range, LIVE response speaker, purpose designed for use with amp modellers and IRs. Its unique design features two additional tweeter cones integrated into the main woofer cone (making it “Triple Cone”). This enables the speaker to deliver near full-range frequency
From its humble beginnings as defective console tubes and punctured speaker cones, the CB Fuzz distills 60 years of gear history in one refined example.Whether you’re a complete fuzz novice or a well-seasoned fuzz freak, the CB Fuzz is a perfectly balanced silicon fuzz circuit (hey, even Hendrix
The G12M-50 Hempback is the first ever hemp cone guitar speaker built by Celestion. It features a cone specifically chosen for its tonal character combined with a medium-weight (35oz) ceramic magnet, Well defined and powerful the speaker delivers a thump in the low end, a finely balanced midrange
The G12M-50 Hempback is the first ever hemp cone guitar speaker built by Celestion. It features a cone specifically chosen for its tonal character combined with a medium-weight (35oz) ceramic magnet, Well defined and powerful the speaker delivers a thump in the low end, a finely balanced midrange
Luxurious water-resistant protective cover for iP2000 subwoofer or 485 x 420 x 500 mm subwoofer. It is made of several layers of nylon and protects the speaker from dirt and dust. The inner part contains foam padding, which protects the speaker from damage during transport. In addition, the cover
Cover for Yamaha speakers: DXS15XLF/15XLF-D, CXS15XLF. The functional speaker covers that protect speakers from unfavorable weather conditions during outdoor performances, dusty and dirty warehouse storage, or the rigors of equipment transport on the road. Trilaminar fabric of durable polyester,
Height adjustable steel speaker stand, featuring steel security pin. Metal legs joint. Maximum height 1800 mm. Available in matt black. | Weight: 3,2 kg | Load Capacity: 40 kg | Tube Diameter: 35 mm | Made in: China | Minimum Height: 1200 mm | Colour: Black | Maximum Height: 1800 mm | Base Width: 980 mm | Material: