Pumps Accessories - 122 to choose from

Marco UP6/A-AC 220V 50 Hz Water pressure system with 20 l tank

Water pressure systems equipped with accumulator tank. Protected by an integrated fuse. The pumps can supply up to 5 faucets at the same time and are suitable for boats up to 60 feet. Extremely compact, they are easy to be installed in the engine compartment. Technical parameters: Voltage – 230

£ 671,00

Marco UP6/A-AC 220V 50 Hz Water pressure system with 20 l tank

Water pressure systems equipped with accumulator tank. Protected by an integrated fuse. The pumps can supply up to 5 faucets at the same time and are suitable for boats up to 60 feet. Extremely compact, they are easy to be installed in the engine compartment. Technical parameters: Voltage – 230

£ 589,00

Marco UP12/A-V20 Water pressure system + 20 l tank

Water pressure systems equipped with accumulator tank. Protected by an integrated fuse. The pumps can supply up to 5 faucets at the same time and are suitable for boats up to 60 feet. Extremely compact, they are easy to be installed in the engine compartment. Technical parameters: Voltage – 24 V,

£ 498,00

Whale Gulper Macerating Pump 12 V

This pump is connected to the toilet unit or to the waste water tanks, is used to drain toilet units or tanks. Virtually unblockable, can run dry, self priming and can be also be used with vacuum toilet units. Materials: nylon/fibreglass + Hypalon rubber + brass + stainless steel. Maximum suction

£ 497,00

Marco UP12/E Electronic water pressure system 36 l/min

Self-priming automatic electric pump with helical PTFE gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers. Technical

£ 497,00

Marco UP12/E Electronic water pressure system 36 l/min

Self-priming automatic electric pump with helical PTFE gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers. Technical

£ 453,00

Marco UP6/E Electronic water pressure system 26 l/min

Self-priming automatic electric pump with helical PTFE gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers. Technical

£ 444,00

Marco UP6/E Electronic water pressure system 26 l/min

Self-priming automatic electric pump with helical PTFE gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers. Technical

£ 435,00

Marco UP12/A-V5 Water pressure system+ 5 l tank

Water pressure systems equipped with accumulator tank. Protected by an integrated fuse. The pumps can supply up to 5 faucets at the same time and are suitable for boats up to 60 feet. Extremely compact, they are easy to be installed in the engine compartment. Technical parameters: Voltage – 24 V,

£ 435,00

Marco UP12/A-V5 Water pressure system+ 5 l tank

Water pressure systems equipped with accumulator tank. Protected by an integrated fuse. The pumps can supply up to 5 faucets at the same time and are suitable for boats up to 60 feet. Extremely compact, they are easy to be installed in the engine compartment. Technical parameters: Voltage – 24 V,

£ 359,00

Flojet Heavy Duty Deck Wash Pumps

Self-priming diaphragm pump 12v, 24v or 32v available. Flow rates up to 17 litres/min (4.5 US gallons/min), pressure switch control, capable of pressures up to 2.8bar (40psi)Ideal for cleaning leisure boats, fish boxes, anchor chains and dinghies.All models include strainer, 'L' also includes a

£ 355,00

Jabsco 37202-2012 Self-priming diaphragm pump 12 volt

Self-priming diaphragm pump. Connections for 19 mm bore hose, Fuse Size – 10 A, Output - up to 13 l/min. For bilge pumping or shower drain with continuously rated motor with thermal overload protection. Multiple diaphragm design allows extended dry running, Self-primes up to 2.5 m vertical lift,

£ 343,00

Marco UP12/A Water pressure system PTFE gears 36 l/min

Self-priming electric pumps with PTFE helical gears, equipped with in-line filter, pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft. Technical parameters: Voltage – 24 V, Consumption

£ 326,00

Marco UP1/AC 230V 50 Hz Pump rubber impeller 30 l/min

Self-priming electric pump for transfer of fresh or salt water with flexible impeller of nitrile rubber which allows the problem-free transit of small particles. Nickel-plated brass body, shaft in stainless steel. Electric motor 0,55 kW. Technical parameters: Voltage – 230 V/50 Hz, Consumption

£ 326,00

Marco UP1/AC 230V 50 Hz Pump rubber impeller 30 l/min

Self-priming electric pump for transfer of fresh or salt water with flexible impeller of nitrile rubber which allows the problem-free transit of small particles. Nickel-plated brass body, shaft in stainless steel. Electric motor 0,55 kW. Technical parameters: Voltage – 230 V/50 Hz, Consumption

£ 308,00

VIC MATIE' - Patent Leather DÃ©colletÃ©

70mm pointed-toe leather pumps from VIC MATIE featuring black, calf leather, patent finish, buckle-fastening ankle strap, pointed toe, branded footbed and sculpted heel. This item is in size 36 and the color is

£ 308,00

VIC MATIE' - Patent Leather DÃ©colletÃ©

70mm pointed-toe leather pumps from VIC MATIE featuring black, calf leather, patent finish, buckle-fastening ankle strap, pointed toe, branded footbed and sculpted heel. This item is in size 37 and the color is

£ 308,00

VIC MATIE' - Patent Leather DÃ©colletÃ©

70mm pointed-toe leather pumps from VIC MATIE featuring black, calf leather, patent finish, buckle-fastening ankle strap, pointed toe, branded footbed and sculpted heel. This item is in size 38 and the color is

£ 308,00

VIC MATIE' - Patent Leather DÃ©colletÃ©

70mm pointed-toe leather pumps from VIC MATIE featuring black, calf leather, patent finish, buckle-fastening ankle strap, pointed toe, branded footbed and sculpted heel. This item is in size 39 and the color is

£ 279,00

Marco UP6/A Water pressure system 26 l/min - 24V

Self-priming automatic electric pump with helical PTFE gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers. Technical

£ 279,00

Rule 3800 (17A) 12V

General purpose high flow, low head centrifugal pump. Connections: 38 mm bore hose. Fuse size: 25 A, Output: up to 220 litre/minute, Max. ecommended discharge head - 3 m, Tough plastic body, Quiet and Efficient. Weight: 2.89 kg. Dimension: 210 x 165 x 165 mm. | Made in: China | Voltage: 12 V

£ 257,00

bikeAngel 2-BIKE/E-BIKE EU+BALKANS Smart GPS Tracker Alarm + Battery Air Pump Silver EU+BALKANS Bluetooth-GPS Cycling electronics

The discounted set with accessories is put together in such a way that all the products form a perfect harmony. Buying the set also saves you money, as it is cheaper than the products individually. The main picture showing the set is for illustrative purposes. | Connectivity : GPS | Connectivity :

£ 253,00

Marco UP12-PV PTFE gear pump 36 l/min with check valve - 24V

Self-priming electric pumps with helical PTFE gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service. Technical parameters: Voltage – 24 V, Consumption – 8 A, Fuse – 15 A, Self-priming – 3 m, Pressure – 2 bar,

£ 253,00

Marco UP12-PV PTFE gear pump 36 l/min with check valve - 12V

Self-priming electric pumps with helical PTFE gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service. Technical parameters: Voltage – 12 V, Consumption – 14 A, Fuse – 20 A, Self-priming – 3 m, Pressure – 2 bar,

£ 253,00

Marco UP12-PV PTFE gear pump 36 l/min with check valve - 24V

Self-priming electric pumps with helical PTFE gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service. Technical parameters: Voltage – 24 V, Consumption – 8 A, Fuse – 15 A, Self-priming – 3 m, Pressure – 2 bar,

£ 246,00

Marco UP6-PV PTFE Gear pump with check valve 26 l/min - 12V

Self-priming electric pumps with PTFE gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: bilge service. Technical parameters: Voltage – 12 V, Consumption – 10 A, Fuse – 15 A, Self-priming – 1,5 m, Pressure – 2 bar, Flow rate – 26

£ 241,00

Marco UP8-RE Reversible electronic pump 10 l/min with flow regulation - 12/24V

Marco UP8-RE Reversible electronic pump 10 l/min with flow regulation - 12/24V | UK/EU Power supply included: No | Made in: Italy

£ 241,00

Marco UP6-PV PTFE Gear pump with check valve 26 l/min - 12V

Self-priming electric pumps with PTFE gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: bilge service. Technical parameters: Voltage – 12 V, Consumption – 10 A, Fuse – 15 A, Self-priming – 1,5 m, Pressure – 2 bar, Flow rate – 26

£ 241,00

Marco UP8-RE Reversible electronic pump 10 l/min with flow regulation - 12/24V

Marco UP8-RE Reversible electronic pump 10 l/min with flow regulation - 12/24V | UK/EU Power supply included: No | Made in: Italy

£ 241,00

Marco UP6-P PTFE Gear pump 26 l/min - 12V

Self-priming electric pumps with PTFE gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: bilge service, transfer of water. Technical parameters: Voltage – 12 V, Consumption – 10 A, Fuse – 15 A, Self-priming – 1,5 m, Pressure – 2

£ 240,00

Marco UP6/A Water pressure system 26 l/min - 12V

Self-priming automatic electric pump with helical PTFE gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers. Technical

£ 239,00

Marco UP12-P PTFE gear pump 36 l/min - 12V

Self-priming electric pumps with helical PTFE gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main applications: bilge service, transfer of water. Technical parameters: Voltage – 12 V, Consumption – 14 A, Fuse – 20 A, Self-priming – 3 m,

£ 239,00

Marco UP12-P PTFE gear pump 36 l/min - 24V

Self-priming electric pumps with helical PTFE gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. bilge service, transfer of water. Technical parameters: Voltage – 24 V, Consumption – 8 A, Fuse – 15 A, Self-priming – 3 m, Pressure – 2 bar,

£ 239,00

Marco UP12-P PTFE gear pump 36 l/min - 24V

Self-priming electric pumps with helical PTFE gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. bilge service, transfer of water. Technical parameters: Voltage – 24 V, Consumption – 8 A, Fuse – 15 A, Self-priming – 3 m, Pressure – 2 bar,

£ 239,00

Marco UP12-P PTFE gear pump 36 l/min - 12V

Self-priming electric pumps with helical PTFE gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main applications: bilge service, transfer of water. Technical parameters: Voltage – 12 V, Consumption – 14 A, Fuse – 20 A, Self-priming – 3 m,

£ 234,00

Whale Gulper pump 320 12V

Built on market leading valve technology, it is as reliable as the Gulper 220 but with a 35% higher flow. Improved features in comparison with the 220 model:Patented Ezi-Clamp locking ring: head rotates 360° without loosing screws.3-foot design for quick and easy installation.Anti-vibration rubber

£ 225,00

Whale Gulper pump 320 24V

Built on market leading valve technology, it is as reliable as the Gulper 220 but with a 35% higher flow. Improved features in comparison with the 220 model: 1)Patented Ezi-Clamp locking ring: head rotates 360° without loosing screws. 2) 3-foot design for quick and easy installation

£ 221,00

Marco UP3/E Electronic water pressure system 15 l/min

Self-priming automatic electric pump with helical PTFE gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers. Technical

£ 218,00

Marco UP6-PV PTFE Gear pump with check valve 26 l/min - 24V

Self-priming electric pumps with PTFE gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: bilge service. Technical parameters: Voltage – 24 V, Consumption – 5 A, Fuse – 7,5 A, Self-priming – 1,5 m, Pressure – 2 bar, Flow rate – 26

£ 218,00

Rule 2000 24V - Bilge Pump

24 V Bilge pump for connecting a 28 mm hose. For medium sized yachts and | motor boats. tough plastic body with integral strainer. The quick | release inlet strainer allows rapid cleaning. For automatic operation | use Rule Float Switches. Integrated ignition protection. Features: Fuse | size: 10

£ 214,00

Rule 2000 (10) 12V Bilge Pump Non-Automatic

12 V Bilge pump for connecting a 28 mm hose. For medium sized yachts and motor boats. tough plastic body with integral strainer. The quick release inlet strainer allows rapid cleaning. For automatic operation use Rule Float Switches. Integrated ignition protection.FeaturesFuse size: 15

£ 209,00

bikeAngel 1-MOTO EU+BALKANS Smart GPS Tracker Alarm + Battery Air Pump Black SET

The discounted set with accessories is put together in such a way that all the products form a perfect harmony. Buying the set also saves you money, as it is cheaper than the products individually. The main picture showing the set is for illustrative purposes. | Special Features : GPS | Made in :

£ 206,00

Marco UP9-P Heavy duty gear pump 12 l/min - PTFE gears - VITON O-Ring - 12V

Self-priming electric pump for transferring of liquids up to 5 bar pressure. Pump body in nickel-plated brass. Main application: high pressure spraying. Technical parameters: Voltage – 12 V, Consumption – 5 A, Fuse – 15 A, Self-priming – 1,5 m, Pressure – 5 bar, Flow rate – 12 l/min,

£ 198,00

Marco UP9-P Heavy duty gear pump 12 l/min - PTFE gears - VITON O-Ring - 24V

Self-priming electric pump for transferring of liquids up to 5 bar pressure. Pump body in nickel-plated brass. Main application: high pressure spraying. Technical parameters: Voltage – 24 V, Consumption – 3 A, Fuse – 7,5 A, Self-priming – 1,5 m, Pressure – 5 bar, Flow rate – 12 l/min,

£ 193,00

Rule Mate 1100 Automatic - Bilge Pump

Fully automatic bilge pump. Switch on when the water reaches a height of | 60 mm, when the water is depleted, the pump automatically turns off. | Unique sensor technology ensures that the pump only switches on when it | is in contact with water, and the pump does not switch on when it comes | to oil -

£ 193,00

Rule Mate 1100 Automatic - Bilge Pump

Fully automatic bilge pump. Switch on when the water reaches a height of | 60 mm, when the water is depleted, the pump automatically turns off. | Unique sensor technology ensures that the pump only switches on when it | is in contact with water, and the pump does not switch on when it comes | to oil -

£ 189,00

Rule 1100 Automatic 27S 12V - Bilge Pump

12 V Bilge pump for connecting a 25 mm and 28 mm hose. For medium sized | yachts and motor boats. tough plastic body with integral strainer. The | quick release inlet strainer allows rapid cleaning. For automatic | operation use Rule Float Switches. Integrated ignition protection. | Features: Fuse

£ 178,00

Marco UP6-P PTFE Gear pump 26 l/min - 24V

Self-priming electric pumps with PTFE gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: bilge service, transfer of water. Technical parameters: Voltage – 24 V, Consumption – 5 A, Fuse – 7,5 A, Self-priming – 1,5 m, Pressure – 2

£ 176,00

Marco UP1-M Pump, rubber impeller 45 l/min - 24V

Self-priming electric pump with rubber impeller. Fitted with water proof cable guide and internal brush holder with EMI filter. Ideal for bilge and waste water on any type of boat. Technical parameters: Voltage – 24 V, Consumption – 7 A, Fuse – 15 A, Self-priming – 1,5 m, Pressure – 1,5

£ 176,00

Marco UP1-M Pump, rubber impeller 45 l/min - 12V

Self-priming electric pump with rubber impeller. Fitted with water proof cable guide and internal brush holder with EMI filter. Ideal for bilge and waste water on any type of boat. Technical parameters: Voltage – 12 V, Consumption – 14 A, Fuse – 20 A, Self-priming – 1,5 m, Pressure – 1,5

£ 173,00

Marco UP3/A Water pressure system 15 l/min 12V

Self-priming automatic electric pump with helical PTFE gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers. Technical

£ 163,00

Marco UP3-PV PTFE Gear pump 15 l/min with check valve 12V

Self-priming electric pumps with helical PTFE gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service. Technical parameters: Voltage – 12 V, Consumption – 6 A, Fuse – 10 A, Self-priming – 1,5 m, Pressure – 2 bar,

£ 163,00

Marco UP1 Pump rubber impeller 35 l/min - 12V

Self-priming electric pump with rubber impeller. Fitted with water proof cable guide and internal brush holder with EMI filter. Ideal for bilge and waste water on any type of boat. Technical parameters: Voltage – 12 V, Consumption – 10 A, Fuse – 20 A, Self-priming – 1,5 m, Pressure – 1,2

£ 159,00

Jabsco Accumulator Tank 30573-000

Plastic vessel with internal membrane. May be mounted in any attitude, compact size for small pressure systems (typically 1 - 2 outlets). Connections - for 13 mm bore hose or threaded ports, dimensions – 340 x 120 x 110 mm, output - nominal 1 litre, working capacity up to approximately 0.5

£ 158,00

Marco UP1 Pump rubber impeller 35 l/min - 24V

Self-priming electric pump with rubber impeller. Fitted with water proof cable guide and internal brush holder with EMI filter. Ideal for bilge and waste water on any type of boat. Technical parameters: Voltage – 24 V, Consumption – 5 A, Fuse – 15 A, Self-priming – 1,5 m, Pressure – 1,2

£ 157,00

Marco UP3/A Water pressure system 15 l/min 24V

Self-priming automatic electric pump with helical PTFE gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers. Technical

£ 157,00

Rule Mate 800 Submersible

Rule Mate 800 Submersible is fully automated bilge compact pump for smaller vessels with integral sensor. Air Vents in the body to help prevent air locks in challenging installations. Back up feature prevent dry running if sensor is fouled, pump reverts to 2.5 minute cycle mode. | Voltage: 12 V | Made

£ 156,00

Rule Mate 800 Submersible

Rule Mate 800 Submersible is fully automated bilge compact pump for smaller vessels with integral sensor. Air Vents in the body to help prevent air locks in challenging installations. Back up feature prevent dry running if sensor is fouled, pump reverts to 2.5 minute cycle mode. | Voltage: 12 V | Made

£ 156,00

Marco OCK1 Oil change Kit 12V

Oil change kit. Complete with bronze gear pump, clips, fuse, hoses and accessories for transferring operations. Voltage - 12 V, self-priming - 1 m. Flow rate: Ø 6 mm - 20 l / h, Ø 8 mm - 60 l / h, Ø 12 mm - 330 l / h, pressure - 2 bar, consumption - 5 A, fuse - 10 A, hose - 13 mm, ports –

£ 154,00

Jabsco Accumulator Tank 30573-000

Plastic vessel with internal membrane. May be mounted in any attitude, compact size for small pressure systems (typically 1 - 2 outlets). Connections - for 13 mm bore hose or threaded ports, dimensions – 340 x 120 x 110 mm, output - nominal 1 litre, working capacity up to approximately 0.5

£ 151,00

Rule Automatic 800 12V 3000 L

Powerful bilge pump made of sturdy plastic and is ideal for smaller boats due to its lightweight and compact design. The inlet strainer of the pump can be removed very easily, allowing for fast and thorough cleaning. The check valve prevents backflow of water into the bilge. Due to its low

£ 150,00

Jabsco Par Max 3 Pressure-Controlled Pump 12V 40PSI

Connections: for 13mm (½”) bore hoseDimensions: 230mm long, 152mm wide, 110mm highFuse Size: 10(amp)Maximum Current: 4.4(amps)Output: 11 litres/minute (2.4 gallons/minute) open flowPRESSURE SWITCH - cuts in at 1.4bar (20psi) - cuts out at 2.8bar (40psi)Efficient, high-flow, self-priming pump

£ 150,00

Whale SS 1100 Automatic Bilge Pump

Low profile automatic pump for confined bilge spaces. Built-in field sensor switch, no maintenance required. Excellent operation even in case of dirt, oil, fuel, etc. Easy access to strainer. Capacity - 69 l / min, hose diameter - 25 mm, voltage - 12 V. | Voltage: 12 V | Made in: United Kingdom

£ 147,00

Marco UP3-P PTFE Gear pump 15 l/min 12V

Self-priming electric water pump with PTFE gears, complete with in-line filter, brass body with stainless steel shaft, suitable for fresh or salt water. For intermittent use only. There are numerous fields of application for this pump, however only exclusively with the allowed liquids mentioned:

£ 145,00

Marco UP3700 Bilge pump 230 l/min

£ 143,00

Marco UP2/E Electronic water pressure system 12 l/min

Self-priming automatic electric pump with helical PTFE gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers. Technical

£ 137,00

Marco UP3-PV PTFE Gear pump 15 l/min with check valve 24V

Self-priming electric pumps with helical PTFE gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service. Technical parameters: Voltage – 24 V, Consumption – 3 A, Fuse – 5 A, Self-priming – 1,5 m, Pressure – 2 bar,

£ 137,00

Jabsco Par Max 3 25PSI 12V

Connections: for 13mm (½”) bore hoseDimensions: 230mm long, 152mm wide, 110mm highFuse Size: 10(amp)Maximum Current: 4.4(amps)Output: 11 litres/minute (2.4 gallons/minute) open flowPRESSURE SWITCH - cuts in at 1.0bar (15psi) - cuts out at 1.7bar (25psi)Efficient, high-flow, self-priming pump

£ 129,00

Jabsco Par Max 2 35PSI 12V

Connections: for 13mm (½”) bore hose or Hep20 push-fit connectors CW193Dimensions: 231mm long, 99mm wide, 106mm highFuse Size: 10(amp)Maximum Current: 6(amps)Output: 7.6 litres/minute (2 gallons/minute) open flowPRESSURE SWITCH - cuts in at 1.7bar (25psi) - cuts out at 2.4bar (35psi)Efficient,

£ 127,00

Marco UP3-P PTFE Gear pump 15 l/min 24V

Self-priming electric water pump with PTFE gears, complete with in-line filter. Brass body with stainless steel shaft. Suitable for fresh or salt water. For intermittent use only. There are numerous fields of application for this pump, however only exclusively with the allowed liquids mentioned:

£ 125,00

Marco UP2/A Water pressure system 10 l/min - 12V

Self-priming electric pumps with PTFE helical gears, equipped with in-line filter, pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft. Technical parameters: Voltage – 12 V, Consumption

£ 121,00

Whale MK3 Gusher - foot pump

Foot Water Pump - A simple solution for water supply in small kitchens. A low-cost freshwater system for faucets and showers. Ideal for use as a backup pump for electrical systems. Suitable for pumping fresh and sea water. Multiple directional inputs and hose outputs facilitate installation. Three

£ 117,00

Rule Mate 500 Automatic - Bilge Pump

Fully automatic bilge pump. Switch on when the water reaches a height of 60 mm, when the water is depleted, the pump automatically turns off. Unique sensor technology ensures that the pump only switches on when it is in contact with water, and the pump does not switch on when it comes to oil - it

£ 115,00

Marco UP1-J Pump, rubber impeller 28 l/min - 12V

Self-priming electric pump with rubber impeller. Fitted with water proof cable guide and internal brush holder with EMI filter. Ideal for bilge and waste water on any type of boat. Technical parameters: Voltage – 12 V, Consumption – 8 A, Fuse – 10 A, Self-priming – 1,5 m, Pressure – 1

£ 115,00

Marco UP1-J Pump, rubber impeller 28 l/min - 24V

Self-priming electric pump with rubber impeller. Fitted with water proof cable guide and internal brush holder with EMI filter. Ideal for bilge and waste water on any type of boat. Technical parameters: Voltage – 24 V, Consumption – 4 A, Fuse – 7,5 A, Self-priming – 1,5 m, Pressure – 1

£ 113,00

Marco UP2-PV PTFE Gear pump 10 l/min with check valve - 12V

Self-priming electric water pump with PTFE gears, complete with in-line filter, brass body with stainless steel shaft, suitable for fresh or salt water. For intermittent use only. There are numerous fields of application for this pump, however only exclusively with the allowed liquids mentioned:

£ 112,00

Rule LP900S LoPro Automatic Bilge Pump 12V

Submersible pump 12 volt DCConnections: For 19 mm (3/4''), 25 mm (1'') or 28 mm (1 1/8'') bore hoseDimensions: 237 mm long, 59 mm diameterCurrent Draw: 4 AFuse Size: 7.5 AOutput: Up to 56 litres / minute (12.5 gallons / minute). Max. recommended discharge head 3 mBrings Rule pumping power to tight

£ 107,00

Marco UP2/A Water pressure system 10 l/min - 24V

Self-priming electric pumps with PTFE helical gears, equipped with in-line filter, pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft. Technical parameters: Voltage – 24 V, Consumption

£ 105,00

Marco UP2000 Bilge pump 126 l/min - 12V

£ 105,00

Marco UP2-P PTFE Gear pump 10 l/min - 12V

Self-priming electric pumps with helical PTFE gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main applications: transfer of water and liquid additives for engines. Technical parameters: Voltage – 12 V, Consumption – 3 A, Fuse – 5 A,

£ 97,90

Marco UP2-PV PTFE Gear pump 10 l/min with check valve - 24V

Self-priming electric water pump with PTFE gears, complete with in-line filter, brass body with stainless steel shaft, suitable for fresh or salt water. For intermittent use only. There are numerous fields of application for this pump, however only exclusively with the allowed liquids mentioned:

£ 93,40

Savage Gear Boat Pump 12V 16PSI

Having the use of a boat, bellyboat or other watercraft can give your fishing the extra edge – and at Savage Gear we have a range of options to help you get onto the hot fishing spots more easily. Our kayaks are packed with innovative features such as high seating positions to give you the

£ 89,20

Marco UP2-P PTFE Gear pump 10 l/min - 24V

Self-priming electric pumps with helical PTFE gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main applications: transfer of water and liquid additives for engines. Technical parameters: Voltage – 24 V, Consumption – 1,5 A, Fuse – 3 A,

£ 86,70

Quick Sensor Bilge switch 9-31V 20A

• Operation by microcontroller.• Advanced digital filter to detect the presence of water.• Remote indication of operation status by led.• Manual remote pump switch-on by button.• Signal for prolonged bilge pump switch on (if led is installed).• Protection against excessive battery

£ 85,70

SKS Airspy Black Pump Accessories

Two-piece tyre pressure control system setThe compact and lightweight SKS AIRSPY tyre pressure sensor provides bikers with the certainty that they are riding with optimal pressure. Simply twist the valve adapter onto the valve, push the sensor onto it and off you go. When it has been mounted, the

£ 85,50

Quick Sensor Bilge switch 9-31V 15A

• Operation by microcontroller.• Advanced digital filter to detect the presence of water.• Remote indication of operation status by led.• Manual remote pump switch-on by button.• Signal for prolonged bilge pump switch on (if led is installed).• Protection against excessive battery

£ 83,60

Whale SS 650 Automatic Bilge Pump

Low profile automatic pump for confined bilge spaces. Built-in field sensor switch, no maintenance required. Excellent operation even in case of dirt, oil, fuel, etc. Easy access to strainer. Capacity - 40 l / min, hose diameter - 19 mm, voltage - 12 V. | Made in: United Kingdom | Voltage: 12 V

£ 83,00

Quick Sensor Bilge switch 9-31V 10A

• Operation by microcontroller.• Advanced digital filter to detect the presence of water.• Remote indication of operation status by led.• Manual remote pump switch-on by button.• Signal for prolonged bilge pump switch on (if led is installed).• Protection against excessive battery

£ 81,40

Marco UP2000 Bilge pump 126 l/min - 24V

£ 78,20

Rule Mate RM-500A 24V

Automatic bilge pump is suitable for medium-big boats. The pump provides a special switch that check every 5 minutes the bilge water level. When the float rises, the pump begins to turn on. It will delay it's activation for two seconds, thus eliminating any false starts. When the float drops and

£ 76,10

Osculati Water circulation pump 24V 3A 6L

Water circulation pump can be used in heat exchangers, fridge systems and air cooling systems. Ideal as delivery pump for watermakers. Silent, low consumption. Strainer + 4 fittings. | UK/EU Power supply included: No | Made in: China | Voltage: 24V

£ 70,30

Attwood Sahara MK2 S500

Features: | | Patented X-Air™ Impeller: Prevents air locking so thatthe pump will not run dry and burn out. | Flexible Outlets | Single - Hand Pump Cartridge Release | Exterior Mounting Feet: Eliminates the need to remove thebasket | No Pipe or Hose Removal Required: Reduces the time that it takes to

£ 69,40

SKS Airspy Black Pump Accessories

The compact and light Airspy tyre pressure sensor from SKS provides bikers with the certainty that they are riding with optimal pressure. Simply twist the valve adapter onto the valve, push the sensor onto it and off you go. When it has been mounted, the dustproof and watertight sensor permanently

£ 65,90

Marco UP1500 Bilge pump 95 l/min - 12V

£ 64,90

Unimer Drainman MKII Bilge Pump

Bilge pump with neoprene cover. It is practical, easy to install and secure, made of solid materials and resists forces up to 15,000 Newtons. The pump operates continuously and can pump up to 100 liters of water in 24 hours. Suction height is 8.2 m. The water is pumped through a hose located at the

£ 61,60

Marco UP1500 Bilge pump 95 l/min - 24V

£ 55,40

Rule 1100 (27DA) 12V - bilge pump

12 V Bilge pump for connecting a 25 mm and 28 mm hose. For medium sized yachts and motor boats. tough plastic body with integral strainer. The quick release inlet strainer allows rapid cleaning. For automatic operation use Rule Float Switches. Integrated ignition protection. Features: Fuse size: 6

£ 47,90

Whale MK2 Baby Foot - self-priming foot pump

Compact , low-cost, self-priming freshwater foot pump. Easy to install and useful in restricted spaces. Angled foot operation for more comfortable pumping. Can be used to prime Whale in-line booster pumps. Flow rate - 8 l / min, for hoses 13 mm in diameter. | Voltage: Neuvedené | Made in: China

£ 47,30

Marco UP1000 Bilge pump 63 l/min - 12V

£ 46,30

Marco UP1000 Bilge pump 63 l/min - 24V

£ 38,90

Savage Gear Hand Pump 29Psi / 2Bar

Inflate belly boats, kayaks or SUP boards with ease thanks to this heavy duty, luxury hand pump. Easy-to-use and super effective, the pump also features a small dial to accurately show you the pressure to be sure you don’t under or overinflate. Unlike many hand pumps on the market, this one

£ 37,60

Lezyne Pro Tubeless Kit Black Pump Accessories

Engineered for road, mountain, or gravel bikes, the comprehensive Pro Tubeless Kit is the perfect all-in-one tubeless tire repair system. It features a compact, lightweight aluminum housing that cleanly integrates a mix of two different-size tire plugs, a plug insertion tool, a plug retention

£ 36,60

Marco UP500 Bilge pump 32 l/min - 24V

24 V completely submersible bilge pump . Compact design with corrosion resistant ABS material body, which clips on and off for easy inspection and cleaning. For use with fresh or salt water, ideal for use on boats and marinas. | | | Power: 30 W | Power Consumption: 1,2 A | Hose: 19 mm | Weight: 0,5

£ 35,10

Osculati Europump II Automatic Bilge Pump G750

Very compact, with built-in electronic level sensor. ABS body, stainless steel shaft. Reduced current draw. Removable from plug-in base. CE certified by RINA in compliance with Law 94/25, directive ISO 28846/28849.Current draw 3 AHead 3 mHose adaptor (Ø A) 19 mm | Voltage: 12 V | Volumetric Flow: 45

£ 32,80

Whale Service kit MK3

Repair kit for foot pump. | Voltage: Neuvedené | Made in: China

£ 31,90

Jabsco Bilge Pump Inlet Strainer 46400-0000

Inlet Strainer for bilge pump Jabsco. Prevents unnecessary pump breakdowns caused by particles in the water. Transparent housing allows instant inspection. Screw off top allows quick in-place cleaning and removal of debris. Dimensions: 120mm long, 70mm wide, 60mm high. Connections: 19mm (3/4'') ID

£ 29,10

Marco UP500 Bilge pump 32 l/min - 12V

The low voltage – 12v completely submersible bilge pump . Compact design with corrosion resistant ABS material body, which clips on and off for easy inspection and cleaning. For use with fresh or salt water, ideal for use on boats and marinas. | | | Fuse: 5 A | Volumetric Flow: 32 l/min | Weight: 0,5

£ 25,30

Marco AS3 Automatic Float Switch For Bilge Pumps - Heavy Duty

Automatic float switch for bilge pumps. Max amperage - 20 (12 V) - 10 (24 V) , OFF-ON – 19-51 mm, Cable length - 900 mm, Dimensions – 127 x 842 x 110 mm. | Dimensions: 127 x 42 x 110 mm | Made in: Italy | Voltage: 12 / 24 V

£ 21,70

Talamex Bilge Pump 55 cm

Manual bilge pump manufactured from oil and petrol resistant plastic. Color: blue/orange. In-and outlet Ø 20 mm. Length – 55 cm. Includes drain hose. | Voltage: Neuvedené | Made in: Italy

£ 21,50

Jabsco Impeller Neoprene Kit 22405-0001

CEF 121 impeller original reference 22405-0001 for inboard engines water pump:JOHNSON original reference: 09-808B.ANCOR original reference: 50021.VETUS original reference: 601.VOLVO original reference: 875583; 833995; 21951342; 3586496Diesel NANNI original reference: FK2,40E/HE; 2,60H; KLA; L30;

£ 19,70

Osculati Extra-Flat automatic switch for any bilge pump

Eco-friendly automatic switch for any bilge pump, Extra-flat version. CE certified in compliance with Law 94/25, ISO 28846 standards. | Voltage: Neuvedené | Made in: Italy

£ 19,60

Talamex Bilge Pump 35 cm

Manual bilge pump manufactured from oil and petrol resistant plastic. Color: blue/orange. In-and outlet Ø 20 mm. Length – 35 cm. Includes drain hose. | Made in: Italy | Voltage: Neuvedené

£ 19,30

Lezyne ABS-1 Pro HP Chuck Braided Black Pump Accessories

Upgraded and redesigned for Year 11, the ABS1 Pro further advances classic Flip-Thread Chuck system. It features a 90° design for enhanced function and usability. The highly durable construction is built using machined aluminum and composite matrix materials, with an extremely robust and fluid

£ 17,80

Osculati Piper Pump Vacuum Self-Emptying

Vacuum self-emptying pump made of anodized aluminium, fitted with hose and stainless steel clamp for mounting the hose to the pump, universal size for all outboard engines. | Voltage: Neuvedené | Made in: China

£ 16,40

Lezyne ABS-1 Pro HP Pump Chuck Head Red Pump Accessories

Lezyne ABS 1 PRO Chuck Pump Head For Schrader and Presta Valves is Compatible with High Pressure Standing Air Pumps and with 'normal' rubber hose. The highly durable construction is built using machined aluminum and composite matrix materials. | Type: Accessories | Weight: 43 g | Colour: Red | Original

£ 15,60

Lezyne ABS Flex + Valve Core Road Black-Silver Pump Accessories

Replacement ABS Flex Hose with integrated valve core wrench for Lezyne hand pumps. Available as Presta only ABS Speed Flex Hose for Road Drive pumps (features Presta threaded and Presta Speed Slip-fit valve connections, speed connection is rebuildable. Compatible with all Lezyne hand pumps that use

£ 15,20

Nuova Rade Automatic Flotter Switch 12V/15A

This float switch is designed for the automatic control of electrically driven bilge pumps. Designed with a reliable rolling-ball and switch system that prevents rapid on/off cycling found on some switches and is safer than mercury switches. When water lifts the chamber buoy up to 6cm, the switch

£ 14,50

Rule EK10710 Bilge Water Alarm Panel

Bilge water alarm panel provides an audible and visual means of warning that water level in your bilge is beyond your bilge pump switch level (not include).Height: 63,5 mmWidth: 82,6 mmSplash water proofedVoltage: 12 V | Made in: China | Voltage: 12 V

£ 14,50

Wilson NBA DRV Pump Kit Accessories for Ball Games

Always be prepared with the NBA DRV Pump Kit. The Kit conveniently includes a Pressure Gauge, 3 Pack Steel Inflation Needles, and DRV Dual Action Pump that fills the ball in half the time of standard pump. | Features | | VALUE KIT: Include Pressure Gauge, 3 Pack Steel Inflation Needles and DRV Dual

£ 12,80

Lezyne ABS Flex Black-Silver Pump Accessories

Replacement ABS Flex Hose for Lezyne hand pumps. Presta/Schrader ABS Flex Hose for HP, HV, Alloy, Pressure, and Tech Drive hand pumps. | Original Colour by Producer: Silver;Black | Type: Accessories | Colour: Black;Silver | Made in: Taiwan

Pumps Accessories122

Marco UP6/A-AC 220V 50 Hz Water pressure system with 20 l tank

Marco UP6/A-AC 220V 50 Hz Water pressure system with 20 l tank

Marco UP12/A-V20 Water pressure system + 20 l tank

Whale Gulper Macerating Pump 12 V

Marco UP12/E Electronic water pressure system 36 l/min

Marco UP12/E Electronic water pressure system 36 l/min

Marco UP6/E Electronic water pressure system 26 l/min

Marco UP6/E Electronic water pressure system 26 l/min

Marco UP12/A-V5 Water pressure system+ 5 l tank

Marco UP12/A-V5 Water pressure system+ 5 l tank

Flojet Heavy Duty Deck Wash Pumps

Jabsco 37202-2012 Self-priming diaphragm pump 12 volt

Marco UP12/A Water pressure system PTFE gears 36 l/min

Marco UP1/AC 230V 50 Hz Pump rubber impeller 30 l/min

Marco UP1/AC 230V 50 Hz Pump rubber impeller 30 l/min

VIC MATIE' - Patent Leather DÃ©colletÃ©

VIC MATIE' - Patent Leather DÃ©colletÃ©

VIC MATIE' - Patent Leather DÃ©colletÃ©

VIC MATIE' - Patent Leather DÃ©colletÃ©

Marco UP6/A Water pressure system 26 l/min - 24V

Rule 3800 (17A) 12V

bikeAngel 2-BIKE/E-BIKE EU+BALKANS Smart GPS Tracker Alarm + Battery Air Pump Silver EU+BALKANS Bluetooth-GPS Cycling electronics

Marco UP12-PV PTFE gear pump 36 l/min with check valve - 24V

Marco UP12-PV PTFE gear pump 36 l/min with check valve - 12V

Marco UP12-PV PTFE gear pump 36 l/min with check valve - 24V

Marco UP6-PV PTFE Gear pump with check valve 26 l/min - 12V

Marco UP8-RE Reversible electronic pump 10 l/min with flow regulation - 12/24V

Marco UP6-PV PTFE Gear pump with check valve 26 l/min - 12V

Marco UP8-RE Reversible electronic pump 10 l/min with flow regulation - 12/24V

Marco UP6-P PTFE Gear pump 26 l/min - 12V

Marco UP6/A Water pressure system 26 l/min - 12V

Marco UP12-P PTFE gear pump 36 l/min - 12V

Marco UP12-P PTFE gear pump 36 l/min - 24V

Marco UP12-P PTFE gear pump 36 l/min - 24V

Marco UP12-P PTFE gear pump 36 l/min - 12V

Whale Gulper pump 320 12V

Whale Gulper pump 320 24V

Marco UP3/E Electronic water pressure system 15 l/min

Marco UP6-PV PTFE Gear pump with check valve 26 l/min - 24V

Rule 2000 24V - Bilge Pump

Rule 2000 (10) 12V Bilge Pump Non-Automatic

bikeAngel 1-MOTO EU+BALKANS Smart GPS Tracker Alarm + Battery Air Pump Black SET

Marco UP9-P Heavy duty gear pump 12 l/min - PTFE gears - VITON O-Ring - 12V

Marco UP9-P Heavy duty gear pump 12 l/min - PTFE gears - VITON O-Ring - 24V

Rule Mate 1100 Automatic - Bilge Pump

Rule Mate 1100 Automatic - Bilge Pump

Rule 1100 Automatic 27S 12V - Bilge Pump

Marco UP6-P PTFE Gear pump 26 l/min - 24V

Marco UP1-M Pump, rubber impeller 45 l/min - 24V

Marco UP1-M Pump, rubber impeller 45 l/min - 12V

Marco UP3/A Water pressure system 15 l/min 12V

Marco UP3-PV PTFE Gear pump 15 l/min with check valve 12V

Marco UP1 Pump rubber impeller 35 l/min - 12V

Jabsco Accumulator Tank 30573-000

Marco UP1 Pump rubber impeller 35 l/min - 24V

Marco UP3/A Water pressure system 15 l/min 24V

Rule Mate 800 Submersible

Rule Mate 800 Submersible

Marco OCK1 Oil change Kit 12V

Jabsco Accumulator Tank 30573-000

Rule Automatic 800 12V 3000 L

Jabsco Par Max 3 Pressure-Controlled Pump 12V 40PSI

Whale SS 1100 Automatic Bilge Pump

Marco UP3-P PTFE Gear pump 15 l/min 12V

Marco UP3700 Bilge pump 230 l/min

Marco UP2/E Electronic water pressure system 12 l/min

Marco UP3-PV PTFE Gear pump 15 l/min with check valve 24V

Jabsco Par Max 3 25PSI 12V

Jabsco Par Max 2 35PSI 12V

Marco UP3-P PTFE Gear pump 15 l/min 24V

Marco UP2/A Water pressure system 10 l/min - 12V

Whale MK3 Gusher - foot pump

Rule Mate 500 Automatic - Bilge Pump

Marco UP1-J Pump, rubber impeller 28 l/min - 12V

Marco UP1-J Pump, rubber impeller 28 l/min - 24V

Marco UP2-PV PTFE Gear pump 10 l/min with check valve - 12V

Rule LP900S LoPro Automatic Bilge Pump 12V

Marco UP2/A Water pressure system 10 l/min - 24V

Marco UP2000 Bilge pump 126 l/min - 12V