Harken 435 Standard Smallboat Furling System Kit

Harken® Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. An optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without removing the headstay. Swivels are independent of the headstay, allowing you to tension the luff separately from the mast rake. FEATURES: Footnote:Includes drum and upper swivel. Does not include hoistable swivel.    Pin-to-pin length (mm): 64 mm   Pin-to-pin length (in): 2 1/2 in   Drum Ø (mm): 73 mm   Drum Ø (in): 2 7/8 in   Maximum line Ø (mm): 4 mm   Maximum line Ø (in): 5/32 in   Jaw width (mm): 8 mm   Jaw width (in): 5/16 in   Maximum luff wire Ø (mm): 3 mm   Maximum luff wire Ø (in): 1/8 in Clevis pin Ø (mm): 6.4 mm   Clevis pin Ø (in): 1/4 in   Weight (g): 215 g   Weight (oz): 7.6 oz   Maximum working load (kg): 431 kg   Maximum working load (lb): 950 lb   Boat length - monohull (m):  4.9 - 6.1 m   Boat length - monohull (ft):  16 - 20 ft   Boat length - multihull (m): To 5.5 m Boat length - monohull (ft): To 18 ft Includes upper swivel: 164    Includes drum: 163 Made in: USA