Lowest price in the last 45 days: £ 122
Prices and availability may change several times a day. Check the current data directly in the e-shops. You can find all available colors and sizes directly in the e-shops.
Both the Blue3 and Red3 use a four piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing. The Red3 are hand selected from Blue3 production runs which meet higher test specifications. Approximately 10% of the run usually exhibits these specs and become a Red3. Grado’s OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum. Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable. Variant: Standard Made in: USA Suitable for: Turntable Weight (g): 5.5 Colour: Black Frequency Response: 10 Hz - 55 kHz Tracking force recommended: 1,5 g Channel separation at 1 kHz: 30 dB Shape: Elliptical Package Quantity (pcs): 1 Recommended load resistance: 47 kOhm Application: Hi-Fi Tracking Force: 1,5g - 2g Compliance: 20 Weight: 5,5 g Voltage: 5 mV
Product Grado Labs Blue3 is described by the EAN code 8509290088122.
Color | Black |
Category | Turntables, Cartridges |
EAN | 8509290088122 |
Both the Blue3 and Red3 use a four piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing. The Red3 are hand selected from Blue3 production runs which meet higher test specifications. Approximately 10% of the run usually exhibits these specs and become a Red3. | Grado’s
Both the Blue3 and Red3 use a four piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing. The Red3 are hand selected from Blue3 production runs which meet higher test specifications. Approximately 10% of the run usually exhibits these specs and become a Red3. | Grado’s
The Grado Statement2 utilizes four reconfigured coils, a precision machined ultra-low mass generating system (lower than any moving coil cartridge), a boron cantilever and a diamond cut to Grado’s strict specifications. All this is hand assembled and housed in an Australian Jarrah wood enclosure
Both the Silver3 and Gold3 use a four piece OTL cantilever with a Grado specific elliptical diamond stylus mounted on a brass bushing. With the Silver3 and Gold3, a machined turned generator is used to achieve a lower distortion and greater transparency. The Gold3 are hand selected from Silver3
Both the Black3 and Green3 use a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing. The Green3 are hand selected from Black3 production runs which meet higher test specifications. Approximately 15% of the run usually exhibits these specs and become a Green3
Both the Silver3 and Gold3 use a four piece OTL cantilever with a Grado specific elliptical diamond stylus mounted on a brass bushing. With the Silver3 and Gold3, a machined turned generator is used to achieve a lower distortion and greater transparency. The Gold3 are hand selected from Silver3
Achieving fantastic accuracy and control, the Reference3 does everything the Master3 can do - but does it better thanks to specialized intricate processes while being crafted.the Reference3 has a much longer build time since it undergoes extremely unique processes only a few of our cartridges go
A Digital DJ looking for a professional, durable case solution for your turntable cartridges? Then don't look further as UDG has developed a super light EVA Hardcase designed for life on the road. Specifications: Color: Black. Weight: 0,26 kg/0.572 lbs. Outer Dimensions: cm: 24.5 x 13.5 x 5.5 -
MM phono cartridge for turntables. The Pro-Ject Pick it S2 MM is manufactured by the cartridge experts at Ortofon and voiced by the design team at Pro-Ject. It is equipped with a special elliptical stylus tip. It provides detailed sound reproduction and expansive imaging. It is a no-nonsense
Replacement ear pads for headphones from the Prestige series made of soft foam. Size: XXL. | | Original Colour by Producer: Black | Made in: China | Colour: Black | Package Quantity (pcs): 2 | Type: Replacement Earpads | Compatibility: Grado Labs | Material: Foam | Package Contents: Ear Pad
Phono cartridge for turntables. In celebration of our 25th anniversary we release this superior cartridge in cooperation with audiophile phonographic pioneer Ortofon! To realize higher levels of detail, we modified the entry level classic OM 10 with pure silver coils, this also opened up the
Phono cartridge for turntables. In celebration of our 25th anniversary we release this superior cartridge in cooperation with audiophile phonographic pioneer Ortofon! To realize higher levels of detail, we modified the entry level classic OM 10 with pure silver coils, this also opened up the
MM type magnetodynamic cartridge suitable for current and older turntables with a standard 1/2' (12.7 mm) mounting with two screws.universal Hi-Fi Phono cartridgediamond stylusoutput voltage: 3.5 mV at 5 cm/sfrequency range: 20 – 20,000 Hzpressure range: 1.5 – 2.5 gmounting screws are included
Phono cartridge for turntables. 2M series uses Ortofons own technology, that allows to reach the same levels of flat frequency response as Moving Coil cartridges. 2M Silver combines these technologies with ultimate simple mounting procedure for nearly all available turntables. Due to MM principle,
The AT-LH13H is a 13-gram universal headshell designed for 4-pin turntable cartridges with threaded bodies, such as the AT-OC9X Series and VM95 Series. This aluminum headshell with hard anodized finish reduces unwanted vibration and is equipped with OFC lead wires. It also features an adjustable
The AT-LH15H is a 15-gram universal headshell designed for 4-pin turntable cartridges with threaded bodies, such as the AT-OC9X Series and VM95 Series. This aluminum headshell with hard anodized finish reduces unwanted vibration and is equipped with OFC lead wires. It also features an adjustable
The AT-LH18H is a 18-gram universal headshell designed for 4-pin turntable cartridges with threaded bodies, such as the AT-OC9X Series and VM95 Series. This aluminum headshell with hard anodized finish reduces unwanted vibration and is equipped with OFC lead wires. It also features an adjustable
Lightweight, aluminum, universal ½''-mount headshell for 4-pin turntable cartridges. Featuring an aluminum die-cast body, the AT-HS10 is designed to keep vibration to the bare minimum. The finger lift is positioned near the front of headshell to enable precise placement of the stylus onto the
The new cartridge case provides space and protection for twin headshell-mounted submerged systems. Ideal for dust-free storage and safe transportation from battle to battle. Dimensions: 80 x 105 x 66 mm. | Made in: China
Cartridge to headshell lead wires. Color-coded lead wires for connecting a phono cartridge to a headshell. 6N-OFCC 99.9999% high-purity oxygen-free copper; 0.12 mm x 29 core strand construction
The Hana SL is the most reviewed and awarded Hana cartridge to date. It is distinguished by its black body and a Shibata stylus expertly mounted to its aluminum cantilever. The Hana SL features tighter channel balance, greater channel separation, and improved high-frequency extension. | Shape:
Cartridge case. 3 sets of cartridges with headshells can be stored. Compatible with double pin lock headshells. Rubber feet for enhanced stability. Colour: Black | Type: Cover | Colour: Black | Made in: China
Universal 1/2' mount headshell for 4-pin turntable cartridges. It features an ultra-lightweight (9 g) aluminum die-cast body to keep vibration to a minimum and a finger lift to enable precise stylus placement. The headshell is also equipped with gold-plated lead wires for lossless signal
The AT81CP is a 0,6 mil conical magnet cartrige. Cartridge fits P-mount turntables. | Suitable for Brand: Technics;Linear Tracking T4P Turntables;Hitachi;Pioneer | Shape: Conical | Recommended load resistance: 47 kOhm | Stylus tip radius: 0,6 mil | Frequency Range: 20 Hz - 20 kHz | Package Contents: