Lowest price in the last 45 days: £ 52,90
Prices and availability may change several times a day. Check the current data directly in the e-shops. You can find all available colors and sizes directly in the e-shops.
2 way corner 90°. The Duratruss DT31 is a 1-point trussing system, also referred as a ''pipe'', which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent assembly and dismantling. The belt tube of 50 mm aluminum tube with a wall thickness of 2 mm gives this system an excellent weight-bearing capacity ratio. Optionally, the system can be extended as desired. Corners, T-branches, angles, and circles are available. Dimensions: 500 x 500 x 50 mm, Weight: 1,1 kg. Made in: China
Product Duratruss DT 31/2-L90 Single Truss is assigned an EAN code 6402829907524.
2 way corner 90°. The Duratruss DT31 is a 1-point trussing system, also referred as a ''pipe'', which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly
The DURATRUSS DT31 is a 1-point trussing system, also referred as a 'pipe', which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent
The Duratruss DT31 is a 1-point trussing system, also referred as a ''pipe'', which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent
The DURATRUSS DT31 is a 1-point trussing system, also referred as a 'pipe', which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent
The DURATRUSS DT31 is a 1-point trussing system, also referred as a 'pipe', which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent
The DURATRUSS DT31 is a 1-point trussing system, also referred as a 'pipe', which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent
2 way corner 120°. The Duratruss DT31 is a 1-point trussing system, also referred as a ''pipe'', which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly
2 way corner 60°. The Duratruss DT31 is a 1-point trussing system, also referred as a ''pipe'', which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly
2 way corner 135°. The Duratruss DT31 is a 1-point trussing system, also referred as a ''pipe'', which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly
2 way corner 45°. The Duratruss DT31 is a 1-point trussing system, also referred as a ''pipe'', which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly
2 way corner 90° horizontal. The DT32 series is one of the most popular trussing systems duratruss has ever produced. The high load capacity combined with a very low weight are the features of this 29cm series with conical coupler. The advantage of the quick connector system lies in the fact that
The DURATRUSS DT31 is a 1-point trussing system - 3-way-corner 90°, also referred as a 'pipe', which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly
2 way corner 90° vertical. The DT32 series is one of the most popular trussing systems duratruss has ever produced. The high load capacity combined with a very low weight are the features of this 29cm series with conical coupler. The advantage of the quick connector system lies in the fact that it
2 way corner 90° horizontal. The DT22 series is a 2-point-trussing-system with conical coupler (spigot), trusspin and safety clip. The advantage of the quick connector system lies in the fact that it closes force-locking the belt tube and allows rapid assembly and dismantling. The four tubes are
3 way T-joint 90°. The Duratruss DT31 is a 1-point trussing system, also referred as a ''pipe'', which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly
The DT24 series is a 4-point-trussing-system with conical coupler (spigot), 2 way rounded corner 90°, trusspin and safety clip. The advantage of the quick connector system lies in the fact that it closes force-locking the belt tube and allows rapid assembly and dismantling. The four tubes are made
2 way corner 90°. The DT24 series is a 4-point-trussing-system with conical coupler (spigot), trusspin and safety clip. The advantage of the quick connector system lies in the fact that it closes force-locking the belt tube and allows rapid assembly and dismantling. The four tubes are made of 35mm
2-way construction with 90° angle and transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 500 x 500 x 194 mm. Weight: 2,1 kg. | Made in: China
2-way apex in construction with 90° angle and transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 500 x 500 x 220 mm. Weight: 2 kg. | Made in:
2-way apex out construction with 90° angle and transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 500 x 500 x 220 mm. Weight: 2 kg. | Made
2-way rounded corner with 90° angle and transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 500 x 500 x 220 mm. Weight: 1,7 kg. | Made in:
2-way rounded corner with 90° angle and transverse reinforcement, designed for stages. It is made of an alloy EN-AW 6060 T66, with tube diameter 35 mm x 2 mm and a cross brace diameter of 8 mm. It can be powdercoated in every RAL colour. Dimensions: 500 x 500 x 220 mm. Weight: 1,5 kg. | Made in:
3 way corner 90° + down. The DT24 series is a 4-point-trussing-system with conical coupler (spigot), trusspin and safety clip. The advantage of the quick connector system lies in the fact that it closes force-locking the belt tube and allows rapid assembly and dismantling. The four tubes are made