Disaster Area Designs MICRO.CLOCK

Micro-Sized MIDI Tap Tempo and Clock Source. The micro.clock allows you to synchronize your tempo-enabled MIDI and non-MIDI devices, without taking up too much precious board space. Bundle with one of TRS-MIDI cables to allow for MIDI clock and program change output to 5-pin MIDI devices, or use a standard TS or TRS cable to send MIDI to 1/4” compatible MIDI pedals. Tap the footswitch to set the master clock tempo. The micro.clock will then send taps to your devices to lock them in to your music. Selectable subdivisions let you tap in quarter-notes and set your devices to dotted-eighths, eight-notes, or triplets! Tap the knob to view or change the subdivisions or output settings for each output, then hold the knob to save the current settings to a preset. Hold the footswitch down to advance to the next preset. You can even set the number of accessible presets so that you only use what you need. Each tempo preset allows you to specify a tempo in BPM or milliseconds, as well as subdivisions or toggle settings for each of the three outputs. You can also set the micro.clock to send a MIDI Program Change to an external MIDI device. Have a pedal that needs an odd or unusual configuration for tempo control? The micro.clock works with devices that accept a normally-open or normally-closed footswitch, and can even send 0-3.3V control voltage that works with pedals with expression control of delay / tempo. Height (cm): 4.2 Package Contents: Manual Depth (cm): 9.3 Outputs: Jack 6,3 mm Width (cm): 3.8 Inputs: Jack 6,3 mm;USB Power Supply: Adapter;9V Original Colour by Producer: Black Colour: Black Made in: USA UK/EU Power supply included: No Display: Yes Battery Operation: No