Cymbal Boom135

Zildjian P0711 Cymbal Arm

Cymbal Boom Arm With Clamp. Features: Multi-adjustable cymbal boom arm with clamp attaches to most cymbal stands with 3/4'' diameter piping. Material: Steel. Finish: Chrome. | Made in: USA

Zildjian A0623 FX Oriental Crash Cymbal 22"

Monstrous, explosive FX cymbal that delivers booming trash crashes, dry stick sound, and a broad sustain rich with dark, exotic overtones.The Oriental Crash of Doom: A truly 'one of a kind' monster crash. Ultra-trashy, very dark and low pitched, this FX monster features an immediate, explosive

Yamaha CS965 Cymbal Boom Stand

The boom stand with heavy weight, step free tilter, doublebraced legs and this leg design offers closer setting with other cymbal stands. | Made in: China | Minimum Height: 910 mm | Maximum Height: 1720 mm | Material: Steel

Yamaha CS865 Cymbal Boom Stand

The boom stand with heavy weight, step free tilter, double-braced legs. | Material: Steel | Minimum Height: 940 mm | Maximum Height: 1750 mm | Made in: China

Yamaha CS755 Cymbal Boom Stand

without Weight, Available Height Range: 91172cm, 3 Single Braced Legs, | Made in: China | Minimum Height: 910 mm | Material: Steel | Maximum Height: 1720 mm

Yamaha CS665A Cymbal Boom Stand

The boom stand with light weight, compact design, offset tilter and single-braced legs. | Minimum Height: 800 mm | Made in: China | Maximum Height: 1630 mm | Material: Steel

Yamaha CS655 Cymbal Boom Stand

Cymbal boom stand with 3 single braced legs. | Minimum Height: 790 mm | Maximum Height: 1620 mm | Made in: China | Material: Steel

Yamaha CH755 Cymbal Arm

Lower pipe height adjustment possible. Boom: 12mm diameter x 327mm long. Base stand: 19/22mm diameter x 300/350mm length. | Made in: China

Yamaha CH750BP Cymbal Arm

Height adjustable lower pipe. Dimensions: 12 x 197mm boom arm, 19 x 200mm/22 x 150mm lower pipe. | Made in: China | Material: Steel

Tamburo CBS800 Cymbal Boom Stand

Professional boom rod with retractable terminal for use in straight rod modes. Sturdy but at the same time stable and light, it is characterized by its 'single arm' leg and by the end of the plate support made with a ball joint, which allows a total customization of the positioning of the plate

Tamburo CBS600 Cymbal Boom Stand

Cymbal stand. The base of this stand is a standard tripod base with double reinforcement and solid rubber feet. Upper arm. Used nylon inserts to prevent direct contact of metal parts. Good choice for rehearsals but also for concerts.Features:• Material: Steel• Diameter 28/25/22 mm• Arm

Tamburo CBS350 Cymbal Boom Stand

Cymbal stand. The base of this stand is a standard tripod base with double reinforcement and solid rubber feet. Upper arm. Used nylon inserts to prevent direct contact of metal parts. Good choice for rehearsals but also for concerts.Features:• Material: Steel• Diameter 25/22 mm• Arm length:

Tamburo CBS200 Cymbal Boom Stand

Cymbal stand. The base of this stand is a standard tripod base with double reinforcement and solid rubber feet. Upper arm. Used nylon inserts to prevent direct contact of metal parts. Good choice for rehearsals but also for concerts.Features:• Material: Steel• Diameter 25/19/16 mm• Arm

Tamburo CBS100 Cymbal Boom Stand

Cymbal stand. The base of this stand is a standard tripod base with double reinforcement and solid rubber feet. Upper arm. Used nylon inserts to prevent direct contact of metal parts. Good choice for rehearsals but also for concerts.Features:• Material: Steel• Diameter 19/16 mm• Arm length:

Tama MTA30 Cymbal Arm

Fixed arm, designed as a connection for a cymbal stand, or as part of a 'gallows', with a length of 30 cm. | Made in: China

Tama MCB57EN Cymbal Arm

MCB57EN can be used in combination with a ratchet arm or the MC66 universal clamp is available.TAMA's patented toothless Quick-Set Tilter marks another TAMA advancement in hardware. Relying on basic principles of physics, the Quick-Set Tilter holds its position using the friction of six smooth

Tama MCB45EN Cymbal Arm

Arm designed to hold the cymbal, made of solid steel with a length of 45 cm and Quick-Set Tilter system. | Made in: China

Tama MCB30EN Cymbal Arm

300mm long boom arm that can be used with a ratchet arm or with Tama's MC66 universal clamp to attach additional cymbals to the setup. It features the QuickSet Tilter that allows for setting the cymbal to almost any angle and holds its position using the friction of six metal disc plates instead of

Tama MCA63EN Cymbal Arm

Combines the MC66 universal clamp and the MCB30EN boom arm. Works perfectly for adding cymbals and accessories to stands with pipes from 19.1mm to 28.6mm in diameter. | Made in: China

Tama MCA53 Cymbal Arm

Cymbal clamp that allows you to add cymbals and accessories to the drum kit without adding another cymbal stand. It works perfectly for stands with pipe diameters of 19.1mm to 28.6mm, and features an easy-to-setup FastClamp attachment system. The toothless Quick-Set tilter securely holds position

Tama MC8HCA20 Hoop Grip Accessory Mount Arm Cymbal Arm

Accessory mount arm for mounting cymbals for accessories as snare drum effects and Hoop Grip attachment. The Hoop Grip is a simple tool that allows you to add cymbals or other accessories to your drum kit to expand your setup and customize your sound with ease. | Made in: China

Tama MC7 Multiclamp

Compact two-sided multi clamp that conveniently attaches one or more boom arms to the cymbal stand. One side holds pipes with diameters from 9mm to 12mm; the other side is a ratchet holder that can hold a 12mm to 25.4mm rod or pipe. | Made in: China

Tama HC84BW Roadpro Cymbal Boom Stand

Cymbal stand with boom arm from RoadPro series that features an upgraded and patented Glide-Tite Grip Joint for a more secure attachment, patented Quick-Set toothless tilter and cymbal mate for easy cymbal setup, and nylon washers. The boom arm is 688 mm long, features a detachable counter weight

Tama HC83BWX2 Roadpro Cymbal Boom Stand

This hardware pack consists of two (2) heavy-duty and versatile HC83BW Roadpro Boom Cymbal Stands. Features include TAMA's patented gearless Quick-Set Tilter enabling infinte angle adjustments, Glide Tight Grip Joint for secure placement and maximum resonance, Double Braced Legs with Nylon Washers

Tama HC83BW Roadpro Cymbal Boom Stand

Cymbal stand from Roadpro series with several enhancements, patented technology and position adjustable arm (boom/straight). It has two Cymbal Mate type position options, patented Reversible Bottom, which protects the hole in the middle of the cymbal from damage and Quick-Set Tilter mounting

Tama HC83BLS Roadpro Light Cymbal Boom Stand

With single braced legs, Roadpro Light stands are 25% lighter than their | standard Roadpro counterparts, making these much easier to transport!TAMA's patented toothless Quick-Set Tilter marks another TAMA advancement in hardware. Relying on basic principles of physics, the Quick-Set Tilter holds

Tama HC63BW Cymbal Boom Stand

The HC63BW is a sturdy, double-braced boom cymbal stand. It features the Roadpro Quick-Set tilter which allows easy positioning of cymbals at virtually any angle. | Minimum Height: 850 mm | Made in: China | Maximum Height: 2010 mm | Material: Steel

Tama HC43BWNX2 Stagemaster Cymbal Boom Stand

This hardware pack consists of two (2) HC43BWN Stage Master Cymbal Stands. Offering core features adopted from the Roadpro Series including Convertible Boom/Straight Tilter for versatility, Double Braced Legs for stability, and Quick-Set Cymbal Mate for fast & easy setting. | Variant: Set | Bundle:

Tama HC43BWN Stage Master Cymbal Boom Stand

VivaRhythm cymbal stand from Stage Master series. VivaRhythm/Straight convertible tilter: Don't let limited stage space cramp your style! If there's no room for a VivaRhythm, simply convert the stand to a straight stand. The VivaRhythm arm stores neatly in the upper tube. Reversible Bottom (US

Tama HC43BSN Stage Master Cymbal Boom Stand

VivaRhythm cymbal stand from Stage Master series. VivaRhythm/Straight convertible tilter: Don't let limited stage space cramp your style! If there's no room for a VivaRhythm, simply convert the stand to a straight stand. The VivaRhythm arm stores neatly in the upper tube. Reversible Bottom (US

Tama HC103BW Cymbal Boom Stand

By simply gripping and pressing the two buttons on the both sides, users can attach and remove the Cymbal Mate with just one touch, making cymbals setup/breakdown a snap. Like standard Cymbal Mate: fine adjustments to the cymbal's swinging motion can be made by rotating the unit. With a partially

Tama CYA5E Cymbal Arm

Cymbal attachment that combines Tama’s MC5 compact clamp and Tama’s LCYE L-rod, allowing user to mount one cymbal onto a boom arm or the L-rod of a tom holder. It works with rods between 9mm and 12mm in diameter. It features Tama's Quick-Set Cymbal Mate, which makes attaching and removing

Tama CSA25 Cymbal Stacker with Tilter Cymbal Arm

Cymbal attachment designed for small cymbals with independent angle adjustment. | Made in: China

Tama CSA15 Cymbal Stacker Cymbal Arm

Cymbal attachment designed for small cymbals. | Made in: China

Tama CCA30 Cymbal Arm

The assortment of boom cymbal holder and Mc61 Multi-ClampBy connecting to stands from 15.9mm to 28.6mm in diameter, you can add any cymbal easily300mm (11 3/4') Length boom cymbal arm | Material: Steel | Made in: China

Tama CA45EN Cymbal Arm

This cymbal holder with a pipe diameter of 19.1mm can be attached to stands using either the MC61 or MC62 multi-clamp. The CA30EN is a professional-grade model equipped with a conversion function that allows the boom arm to be stored in the standpipe and also includes the Quick-Set Tilter for

Tama CA30EN Cymbal Arm

This cymbal holder with a pipe diameter of 19.1mm can be attached to stands using either the MC61 or MC62 multi-clamp.The CA30EN is a professional-grade model equipped with a conversion function that allows the boom arm to be stored in the stand pipe and also includes the Quick-Set Tilter for

Stagg LBD-52 Cymbal Boom Stand

Double-braced boom cymbal stand, 52 series Tubes: 3-section, diameter: 25 mm / 22 mm / 19 mm Legs: Double-braced Maximum height: 180 cm Boom arm length: 39 cm 360 x 360 ° omnidirectional tilter Boom arm can be inserted inside the stand Net weight: 3.35 kg Finish: Chrome plated | Maximum Height:

Stable MA-03 Cymbal Arm

Additional cymbal boom arm with clamp that can be attached to another stand. | Made in: China

Stable DB-118S Cymbal Arm

Small cymbal holder with clamp and felt cymbal dampers. Colour: Chrome. | Made in: Taiwan

Stable DB-117 Cymbal Arm

Half boom cymbal arm from Deluxe series that features a fast clamping Quick-Tilt system and a 360-degree adjustable angle of the holder. Chrome finish.Tube size: 7/8' x 175mmRod size: 12.2 x 340mmInner box package: 566 x 106 x 103mm | Made in: Taiwan

Stable CB-903 Cymbal Boom Stand

Professional heavy-duty single cymbal boom stand from Pro series for most demanding drummers that features a tripod base with double-braced legs, capped with fat rubber feet to ensure the best grip. It is equipped with two memory clamps for easy and extended height adjustment, and boom arm without

Stable CB-902 Cymbal Boom Stand

Heavy-duty and durable twin cymbal boom stand with double-braced legs and steel tubing that ensures incredible stability. | Material: Steel | Made in: China

Stable CB-901X Cymbal Boom Stand

Professional cymbal ‘boom’ stand from PRO series with sturdy construction that meets the requirements of the most demanding drummers. It features a tripod base with double braced legs and robust rubber feet that ensure a great stability, and two memory clamps for comfortable, easy and extended

Stable CB-901 Cymbal Boom Stand

Professional cymbal ‘boom’ stand from PRO series with sturdy construction that meets the requirements of the most demanding drummers. It features a tripod base with double braced legs and robust rubber feet that ensure a great stability, and two memory clamps for comfortable, easy and extended

Stable CB-801 Cymbal Boom Stand

Professional light-weight cymbal boom stand from Pro series with sturdy construction and tripod base with double-braced legs, capped with fat rubber feet to ensure the best grip. It is equipped with memory clamp for easy and comfortable height adjustment, and boom arm without weight that makes is

Sonor MBA4000 Cymbal Arm

Professional, road-ready hardware at an unbeatable price. Equipped with lots of individual components, the 4000 Series is easy to set up, adjust and tear down. | Material: Steel | Made in: China

Sonor DCS4000 Cymbal Boom Stand

The Sonor DCS 4000 Double Cymbal Stand is professional, road-ready hardware at an unbeatable price. The 4000 series adjustable boom arms secure 2 cymbals at the perfect angle over your drums, while taking up half the footprint. The double braced Sonor DCS 4000 is genuine Sonor quality that won't

Sonor CBS672 Cymbal Boom Stand

hardware: cymbal stand with arm | Material: Steel | Made in: China

Sonor CBA671 Cymbal Arm

Cymbal arm: 600 series, Cymbal Boom Arm | Made in: China

Roland MDY-STD

Mount for V-Cymbal pads. It features a flexible ball-clamp tilter, a boom arm and a clamp that’s compatible with all Roland MDS-series drum stands for expanding your setup with more cymbals. Provides options for boom and straight cymbal mounting positions. | Made in: China

Roland DBS-10 Cymbal Boom Stand

The DBS-10 is a telescopic cymbal stand for Roland V-Cymbals. While originally developed for the V-Drums Acoustic Design series, it’s equally at home with other V-Drums kits. It features three double-braced legs for stability, and offers a heavy-duty chrome finish for durability and strong looks

Pearl CLH-930 Hi-Hat Stand

The CLH-930 Uni-Lock Closed Hi-Hat Boom Arm mounts a pair of cymbals in practically any location around the drum kit. Useful for standard closed hi-hat cymbals or creative cymbal stacking, its simple spring-action mounting system allows you to choose the amount of 'wash' in your mounted cymbals

Pearl CH-930S Cymbal Arm

Excellent for rack attachments and added boom arms for smaller cymbals, Pearl's Uni-Lock Short Boom Cymbal Holder matches 930 Series hardware and features ratchetless cymbal angle adjustment. | | Uni-Lock Titler | Plastic Wingnut and Cup | Felt Cymbal Washers | 7/8' Diameter Post with Stop Lock | | Made in:

Pearl CH-930 Cymbal Arm

The Pearl CH-930 is a tour-ready, high-impact cymbal holder perfect for adapting to existing stands and rack set-ups; giving full access to crashes, splashes, and rides all around the drum kit. Its Uni-Lock tilter delivers nearly limitless angle adjustment, and the extended, solid hide-away boom

Pearl CH-830S Cymbal Arm

Cymbal boom arm that features Uni-Lock tilter and 7/8'' diameter post with Stop Lock function. | Made in: China | Material: Steel

Pearl CH-830 Cymbal Arm

Pearl offers cymbal holders for every application whether rack or adapter mounted. The CH-830 has a Uni-Lock tilter for rock solid cymbal placement and has a boom arm with no counter weight. | | Uni-Lock | Plastic Wingnut and Cymbal Cup | 7/8' Diameter Post | Hide-Away Knurled Rod | | Material:

Pearl CH-70 Cymbal Arm

Cymbal holder that features a cymbal boom arm and integrated quick-release mounting bracket for applications where full-sized stands are not required, for example mounting splash cymbals. | Made in: China

Pearl CH-1030BS Cymbal Arm

A professional solution for added cymbals and accessories, Pearl's Gyro-Lock Short Boom Cymbal Holder is easily adaptable to drum racks or other stands around the kit. Matching the look and function of professional 1030 Series hardware, the Gyro-Lock cymbal tilter features ratchetless, multi-axis

Pearl CH-1030B Cymbal Arm

Gyro Lock Tilter, 7/8-Inch Diameter Post with Stop-Lock. The CH1030 Gyro-Lock Tilter Boom Cymbal Holder has fantastic features such as the WingLoc quick release wing nut, reversible seat cup, built-in cowbell rod, and a 7/8 inch diameter post with stop lock. | Made in: China

Pearl BC-930 Cymbal Boom Stand

Shorter tom holder from the Gear 99 series that features a wing-nut tilter, used on bass drum. It has a shorter 25mm arm for use with suspension mounting systems such as the Pearl OptiMount and I.S.S. | Made in: China | Material: Steel

Pearl BC-830 Cymbal Boom Stand

The Pearl BC830 Double Braced Cymbal Stand with Uni-Lock Tilter has 3 sections and double-braced legs. The BC830 also features positive-locking gear tilters for slip-proof cymbal positioning. | Made in: China | Material: Steel

Pearl BC-150S Flatbase Cymbal Boom Stand

Pearl's 150 Series Flat-Based Hardware increases function at a fraction of the weight. Taking on the flush-based platform of classic drum hardware, 150 Series Straight Cymbal (C150S) Cymbal Boom (BC150S) and Snare (S150S) stands are built to stand up to rigorous gigging and play at less than five

PDP by DW PDAXMG6QG Cymbal Arm

Cymbal boom arm with an MG3 tube to boom arm clamp. The PDAXMG6QG allows you to mount a cymbal to your drum kit. The MG3 clamp allows you to attach this cymbal mount to any cymbal or drum stand. Includes a Quick Grip clamp with infinite angle adjustment and MG3 tube to boom arm clamp. Colour:

PDP by DW PDAXMG6QG Cymbal Arm

Cymbal boom arm with an MG3 tube to boom arm clamp. The PDAXMG6QG allows you to mount a cymbal to your drum kit. The MG3 clamp allows you to attach this cymbal mount to any cymbal or drum stand. Includes a Quick Grip clamp with infinite angle adjustment and MG3 tube to boom arm clamp. Colour:

PDP by DW PDAXADCYM Cymbal Arm

Adjustable Quick Grip Cymbal Holder, which allows you to place an extra cymbal on any rod with a 10.5 mm to 1/2'' (~13 mm) diameter. Includes a Quick Grip Clamp for infinite angle adjustment, a cymbal seat with felt pads and a 1/2'' rod, and a DW boom arm memory lock. Colour: chrome | Made in: China

PDP by DW PDAXADCYM Cymbal Arm

Adjustable Quick Grip Cymbal Holder, which allows you to place an extra cymbal on any rod with a 10.5 mm to 1/2'' (~13 mm) diameter. Includes a Quick Grip Clamp for infinite angle adjustment, a cymbal seat with felt pads and a 1/2'' rod, and a DW boom arm memory lock. Colour: chrome | Made in: China

PDP by DW PDAX934SQG Cymbal Arm

Long /16''/ cymbal boom arm with tube /diameter: 3/4“ length: 9“/ that features a Quick Grip cymbal tilter with infinite angle adjustment, two joints for optimal placement of cymbals, sounds, and effects. Boom arm is with 1/2'' diameter. Colour: chrome | Made in: China

PDP by DW PDAX934SQG Cymbal Arm

Long /16''/ cymbal boom arm with tube /diameter: 3/4“ length: 9“/ that features a Quick Grip cymbal tilter with infinite angle adjustment, two joints for optimal placement of cymbals, sounds, and effects. Boom arm is with 1/2'' diameter. Colour: chrome | Made in: China

PDP by DW PDAX912SQG Cymbal Arm

Short /10''/ cymbal boom arm that features a Quick Grip cymbal tilter with infinite angle adjustment, a 1/2'' boom arm diameter, and a DW boom arm memory lock. Colour: chrome | Made in: China

PDP by DW PDAX912SQG Cymbal Arm

Short /10''/ cymbal boom arm that features a Quick Grip cymbal tilter with infinite angle adjustment, a 1/2'' boom arm diameter, and a DW boom arm memory lock. Colour: chrome | Made in: China

PDP by DW PDAX912QG Cymbal Arm

Long /16''/ cymbal boom arm that features a Quick Grip cymbal tilter with infinite angle adjustment, a 1/2'' boom arm diameter, and a DW boom arm memory lock. Colour: chrome | Made in: China

PDP by DW PDAX912QG Cymbal Arm

Long /16''/ cymbal boom arm that features a Quick Grip cymbal tilter with infinite angle adjustment, a 1/2'' boom arm diameter, and a DW boom arm memory lock. Colour: chrome | Made in: China

PDP by DW PDAX909 Cymbal Arm

Quick Grip Cymbal Stacker, which allows you to add an extra cymbal on top of a cymbal stand. Most cymbal stands use an M8 thread wing nut to hold the top cymbal felt onto the cymbal. Colour: Chrome. | Made in: China

PDP by DW PDAX909 Cymbal Arm

Quick Grip Cymbal Stacker, which allows you to add an extra cymbal on top of a cymbal stand. Most cymbal stands use an M8 thread wing nut to hold the top cymbal felt onto the cymbal. Colour: Chrome. | Made in: China

Meinl MCA Cymbal Arm

Cymbal Attachment. The Meinl cymbal attachment consists of the Meinl multiclamp and a Meinl cymbal boom arm. It works perfectly for adding cymbals and accessories to any stands. | Made in: Taiwan | Material: Steel | Length (mm): 300.0

Meinl MC-CYS Cymbal Arm

Cymbal Mount: CYMBAL STACKERS. 6mm thread. The MEINL Cymbal Stackers enable a space saving set up of various cymbals on top of each other. Size: ø 6 mm. Material: Chrome plated steel. Features: Felt washers | Made in: Thailand

Meinl MC-CY Cymbal Arm

Cymbal Mount. Meinl MC-CYS CYMBAL STACKERS 6mm thread. The MEINL Cymbal Stackers enable a space saving set up of various cymbals on top of each other. Size: o 6 mm. Material: Chrome plated steel. Features: Felt washers | Made in: Thailand | Material: Steel

Mapex BF1000 Cymbal Boom Stand

Boom stand with hide-away arm from Falcon series that provides the features and conveniences needed by pros in the studio, on tour, or in the woodshed. With memory markings on the boom tilter and a Super-Glide stepless cymbal tilter with 360 degree rotation ability, this boom stand is all about

Mapex B995A Cymbal Boom Stand

Hide-away boom arms are easy to store and transport. Multi-sustain cymbal felts produce different degrees of sustain to suit individual needs and tastes. Universal ball-in-socket cymbal and tom arm tilters make positioning easy. | Material: Steel

Mapex B990A Cymbal Boom Stand

Hide-away boom arms are easy to store and transport. Multi-sustain cymbal felts produce different degrees of sustain to suit individual needs and tastes. Universal ball-in-socket cymbal and tom arm tilters make positioning easy. | Material: Steel

Mapex B80EB Cymbal Arm

Armory hide-away boom cymbal arm for B800EB Armory boom stand. Multi-angle adjustments make set-ups more flexible. Quick release cymbal lock makes set-ups more flexible. | Material: Steel | Made in: China

Mapex B800EB Cymbal Boom Stand

Armory is a complete line of gig-quality hardware featuring heavy-duty tubes, double-braced legs, memory locks, and the adjustability needed by the serious player. To suit each drummer's unique style and kit finish, Armory Hardware comes in chrome, black-plated, or a unique hybrid finish featuring

Mapex B800 Cymbal Boom Stand

Boom stand with knurled hideaway arm from Armory series that features heavy-duty tubes, double-braced legs, memory locks, and the adjustability needed by the serious player. The multi-step boom and Super-Glide step-less cymbal tilters allow for fine adjustment of cymbal angle, while the

Mapex B800 Cymbal Boom Stand

Boom stand with knurled hideaway arm from Armory series that features heavy-duty tubes, double-braced legs, memory locks, and the adjustability needed by the serious player. The multi-step boom and Super-Glide step-less cymbal tilters allow for fine adjustment of cymbal angle, while the

Mapex B80 Armory Cymbal Arm

Armory 800 Series Boom Arm with quick release nut tube 3/4'. | Material: Steel | Made in: China

Mapex B60EB Cymbal Arm

Boom arm for stands from Mars 600 series that features a 3/4''/19mm thick chrome tube. Arm length 30 cm/ 12'', Weight 464 g. | Material: Steel | Made in: China

Mapex B600EB Cymbal Boom Stand

Lightweight yet highly functional boom cymbal stand from Mars Hardware series that will serve the needs of gigging drummers needing to lighten their load or younger players looking to make a major upgrade. It features multi-step boom and cymbal tilters that allow for convenient positioning, and the

Mapex B600 Cymbal Boom Stand

Lightweight yet highly functional boom cymbal stand from Mars Hardware series that will serve the needs of gigging drummers needing to lighten their load or younger players looking to make a major upgrade. It features multi-step boom and cymbal tilters that allow for convenient positioning, and the

Mapex B60 Cymbal Arm

Boom arm for stands from Mars 600 series that features a 3/4''/19mm thick chrome tube. 12' long arm. | Length (mm): 304.8 | Tube Diameter: 19 mm | Material: Steel | Made in: China

Mapex B400EB Cymbal Boom Stand

The B400 Boom Stand delivers essential features at an economical price. The multi angle boom arm provides compact storage and transportation while the multi-step boom, the cymbal tilters and the 3 tier height allow for convenient positioning. The smaller tube diameter makes this stand lighter to

Mapex B400 Cymbal Boom Stand

The B400 Boom Stand delivers essential features at an economical price. The multi angle boom arm provides compact storage and transportation while the multi-step boom, the cymbal tilters and the 3 tier height allow for convenient positioning. The smaller tube diameter makes this stand lighter to

Mapex B200 Cymbal Boom Stand

Sturdy and reliable basic boom cymbal stand that is suitable for both beginners and professionals. It features a boom arm that is 40 cm long and double-braced legs for improved stability during playing. | Material: Steel | Maximum Height: 1620 mm | Minimum Height: 760 mm | Made in: China

Mapex B100 Cymbal Arm

Falcon series boom arm with quick release nut tube 7/8'. | Made in: China

Gibraltar SC-USCB Cymbal Arm

Gibraltar SC-UCB Cymbal Arm

Gibraltar SC-SBBT-TP Cymbal Arm

Gibraltar SC-RBA Drum Rack

This Rack Cymbal Boom Attachment fits over any 1-1/2 inch diameter rack tube and allows mounting of most popular cymbal boom arms. | Made in: Taiwan | Material: Steel

Gibraltar SC-LBBT Cymbal Arm

– 7⁄8″ diameter, 16″ down tube– 12.7MM diameter, 18″ boom– Fitted with Brake Tilter and hinged memory lock (1/pack) | Material: Steel | Made in: Taiwan

Gibraltar SC-GCA Cymbal Arm

Cymbal arm with grabber clamp that allows adding splash, crash or effects cymbals to the set uo without adding another tripod cymbal stand. Grabber clamp mounts directly to the tube of the existing cymbal stand, while its other end has a fine geared adjustment to position the 18-inch, 12.7mm boom

Gibraltar SC-GCA-BT Cymbal Arm

Grabber cymbal arm attachment with brake tilter that mounts right onto any tube. | Made in: Taiwan

Gibraltar SC-GCA-BT Cymbal Arm

Grabber cymbal arm attachment with brake tilter that mounts right onto any tube. | Made in: Taiwan

Gibraltar SC-CMBAC Cymbal Arm

12″ boom arm12.7mm diameter boom with geared tilter and twin ratchet grabber clampMounts to any drum or cymbal stand (1/pack) | Made in: Taiwan

Gibraltar SC-CLBAC Cymbal Arm

Save space and minimize clutter in your set up. The long cymbal boom arm with attachment clamp can mount to any existing cymbal or tom stand. Mount crash and splash cymbals efficiently anywhere on your kit. | Made in: Taiwan

Gibraltar SC-4425MB Cymbal Arm

The SC-4425MB Mini Cymbal Boom Arm, allows you to add a crash or splash cymbal to your set up, without having to add another stand. Connect it to a rack or existing cymbal / tom stand with a multi clamp, and position the cymbal exactly where you need it. This light weight boom has a 10” down

Gibraltar SC-4425B-1 Cymbal Arm

Cymbal boom arm ratchet tilter for 7/8'/22.25mm diameter tube with 13.8'/350.5mm down tube length. | Made in: Taiwan

Gibraltar SC-3325B-1 Cymbal Arm

The Gibraltar SC-3325B-1 Cymbal Holder includes a cymbal boom arm with a ratchet tilter and down tube.Gibraltar SC-3325B-1 Cymbal Holder features:Cymbal Boom Arm with Ratchet Tilter from Gibraltar Hardware¾” Diameter13.8” Down Tube Length16” Boom Arm | Made in: Taiwan

Gibraltar 9709-BT Cymbal Boom Stand

Boom cymbal stand from 9709 series. Heavy duty, double braced tripod base with cast collar adjustment and Gibraltar ‘Super Foot’. Parallel bar tripod bracing. Super Lock height adjust - Hinged height adjustment with ABS protective tube inserts and wing tension memory lock. Gearless Brake Tilter

Gibraltar 6709 Cymbal Boom Stand

This professional grade cymbal stand comes with a double braced tripod assembly which provides maximum stability, but yet light enough in weight and mass for easy transportation. Enjoy all of the features of touring professional including a gearless cymbal tilter, casted hinged height adjustment

Gibraltar 5709 Cymbal Boom Stand

Medium-weight boom cymbal stand from 5700 series that utilizes all professional features in a low-mass double-braced stand. Its double braced tripod with cast height assembly and Gibraltar’s exclusive round rubber feet provide stability without a large profile. The stand features a 2-point

Gibraltar 4709 Cymbal Boom Stand

Lightweight cymbal boom stand with low-mass, double-braced tripod construction and hinged height adjustments. It features nylon inserts for avoiding metal-to-metal contact and new “G” style pedal board design. Adjustable height: 76 to 144 cm. Weight: 3.2 kg. | Maximum Height: 1440 mm | Material:

DW SMMG6 Cymbal Arm

Cymbal arm. Infinitely adjustable inclination. Techlock drum key locking mechanism. Infinitely variable felt spacing adjuster. Memory clamp. Clamp SMMG3. Boom 1/2“. Length: 45,5 cm (18''). | Made in: Taiwan

DW SMMG6 Cymbal Arm

Cymbal arm. Infinitely adjustable inclination. Techlock drum key locking mechanism. Infinitely variable felt spacing adjuster. Memory clamp. Clamp SMMG3. Boom 1/2“. Length: 45,5 cm (18''). | Made in: Taiwan

DW SM934S Cymbal Arm

Cymbal arm. Infinitely adjustable inclination. Techlock drum key locking mechanism. Infinitely variable felt spacing adjuster. Memory clamp. Boom 1/2“. Length: 23 cm (9“). | Material: Steel | Made in: Taiwan

DW SM934 Cymbal Arm

Cymbal arm. Infinitely adjustable inclination. Techlock drum key locking mechanism. Infinitely variable felt spacing adjuster. Memory clamp. Boom 1/2“. Length: 45,5 cm (18“). | Made in: Taiwan | Material: Steel

DW SM912 Cymbal Arm

Cymbal arm with a diameter of 1/2' and a length of 18'. It has a memory clip and a continuously adjustable tilting mechanism. The TechLock locking mechanism, which can be adjusted with a drum key, ensures that the settings are accurate. | Material: Steel | Made in: Taiwan

DW SM906 Cymbal Arm

Attachment for attaching / placing another cymbal on the cymbal arm. Infinitely adjustable felt distance adjuster. Suitable for all stands / holders for cymbals with M8 thread. Length 6'. | Made in: Taiwan | Material: Steel

DW SM904 Cymbal Arm

Attachment for attaching / placing another cymbal on the cymbal arm. Infinitely adjustable felt distance adjuster. Suitable for all stands / holders for cymbals with M8 thread. Length 4'. | Made in: Taiwan | Material: Steel

DW SM799 Cymbal Arm

Cymbal holder for mounting 1/2' arm or L arm. It consists of SM798 Dogbone 12' holder and SM912 18' cymbal arms. | Made in: USA | Material: Steel

DW SM770S Cymbal Arm

Bass drum Cymbal holder. For fitting a cymbal on a bass-drum. Infinitely variable felt spacing adjuster. Smaller version of SM770 holder. Colour: Chrome. | Material: Steel | Made in: Taiwan