AKG MDPA

AKG MDA1

Adapter XLR female. The MDA1 adapter connector links every AKG MicroLite microphone with an AKG bodypack transmitter with 3-pin Mini-XLR input. | Made in: China

AKG MDA5 AT

Adapter for Audio-Technica. The MDA5 AT adapter connector links every AKG Microlite microphone with an Audio-Technica bodypack transmitter with 4-pin locking connector. | Made in: China

AKG MDAi CPA Mic Adapter XLR Connector

PA microphone adapter that allows any dynamic vocal microphone to instantly become part of the HARMAN Connected PA system. Simply attach the device to any input of the Soundcraft Ui24r mixer and then plug-in the dynamic microphone and microphone cable for automatic recognition with the HARMAN

DPA DAD6017

AKG MPAVL Black 50 cm

Phantom Power Adapter with integrated switchable bass roll-off switch. Cable adapter is compatibile with C519, C518 and C516 models from the L-Type Series and all models from 500X series. Legth: 50 cm. Color: Black | ~ Length: 0 m;1 m | Made in: China | Length: 50 cm | Colour: Black | Type-B Connector:

Shure WA-330 MINI XLR Connector

4pin miniconnector adapts a smalldiameter microphone cable to a bodypack transmitter

AKG EK 300 Headphone Cable

Headphone cable with a length of 3 meters, mini Jack connector, mini XLR connector for connection to headphones. | Compatible with: K240;K271; K141;K171 | Microphone: No | Original Colour by Producer: Black | Made in: China | Length: 3 m | ~ Length: 3 m | Cable Length: 3 m | Colour: Black | Type-B Connector: Mini

Bespeco HDJM900 Black 9 m

Low capacity microphone cable with hybrid connector from the Silos series. Low capacity keeps all the frequencies unchanged (not cutting the high frequencies). As a result cable has a clean and bright sound that is accurate to its source. Capacity depends mainly on the construction material of

AKG MK/GL-WMS

Cable adapter with TQG to 6.3 mm jack connectors. Instrument cable for PT pocket transmitters. Length 114 cm. Color: Black. | Length: 110 cm | Made in: China | Colour: Black | ~ Length: 1 m

MiPro MJ-53

Condenser microphone adaptor that enables a condenser microphone with mini XLR plug to connect directly to the XLR jack input of a mixer which provides 12–48V DC phantom power. The high output impedance of a condenser microphone will be transformed to low output impedance at about 200 Ohms. The

DPA DAD6032

Special adapter for an original DPA MicroDot and a TA-4F Switchcraft connector that connects the DPA's d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to adapter for Beyerdynamic OPUS wireless systems, providing

DPA DAD6021

Special adapter for an original DPA MicroDot and TA-5F connector that is ideal for normal sound pressure level (0 dB attenuation) and connects the DPA's d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to

DPA DAD6033

Special adapter for an original DPA MicroDot and a 4-pin Hirose connector that connects the DPA's d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to Audio-Technica wireless systems, providing flexible, simple and

Rycote PCS 3/8 Classic Boom Connector

The PCS-Boom Connector is an incredibly convenient and efficient way to simplify and speed-up the fitting and removal of any accessory to a 3/8″ male threaded boom pole. And, importantly, it provides a completely secure and silent connection during use!A range of optional attachment products are

AKG C214 Studio Condenser Microphone

frequency response: 20Hz20kHz, case and windshield. dimensions: 160 x 55mm. Weight: 280g, XLR connector. Includes clip, requires phantom power (1252V), 20dB pad, optional microphone holder SA61 | Package Contents: Microphone;Holder;Suitcase;Windscreen | Frequency Range: 20 Hz - 20 kHz | Polar Pattern:

TIE TXLRD3

Phantom power adapter for connecting TIE instrument and other microphones with 3-pin mini XLR connection to a mixer or audio interfaces with 48 volt phantom power. | Made in: China | Type-A Connector: XLR Male | Type: Reduction | Type-B Connector: XLR mini Male

Maono XU01

The black microphone cable is equipped with USB - XLR female connectors. | Type-A Connector: USB | Type-B Connector: XLR Female | Made in: China

Rode MiCon-10

The RODE MiConTM connector system provides seamless integration between the RODE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-10 is designed to connect to MIPRO transmitters with 4-pin mini XLR connector. Dimensions: 36 x 13,6 x 10,4 mm. Weight: 10

Rode MiCon-4

The RODE MiConTM connector system provides seamless integration between the RODE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-4 is designed to connect to Audio Technica UniPakTM Body-Pack transmitters 1800, 2000 and 3000. Dimensions: 36 x 11,6 x 11,6

Rode MiCon-5

The RODE MiConTM connector system provides seamless integration between the RODE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-5 is designed to connect to a standard 3 pin XLR, with P48 phantom power. Dimensions: 61,8 x 30,1 x 21 mm. Weight: 50 g. | Made

Rode MiCon-6

The RODE MiConTM connector system provides seamless integration between the RODE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-6 is designed to connect to AKG transmitters PT40, PT60, PT61, PT80, PT400, PT2000 and PT4000, as well as the Audix RAD-360

Rode MiCon-7

The RODE MiConTM connector system provides seamless integration between the RODE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-7 is designed to connect to Lectrosonics transmitters SM Series, UMa Series, LMa Series and UM450. Dimensions: 36 x 13 x 10,5

Rode VXLR PRO

The RØDE VXLR Pro is a female TRS mini-jack to male XLR adaptor for connecting RØDE microphones with a 3.5mm output to devices with an XLR input. It utilises an internal transformer to convert an unbalanced signal to a balanced signal, making it ideal for connecting a microphone with an

AKG C 520

requires 952V phantom power, 3pole XLR connector, frequency response: 60Hz20kHz, variable size, includes windscreen and cable. Colour: Black. Cable length: 3,0m | Type: Condenser | Made in: China | Colour: Black | Polar Pattern: Cardioid | Variant: C 520 | Outputs: Balanced XLR | Frequency Range: 60 Hz - 20