Prices and availability may change several times a day. Check the current data directly in the e-shops. You can find all available colors and sizes directly in the e-shops.
Contour Lock system with removable plates for connection from all sides. This allows the switch to be a stand alone unit or locked together with other switches. The control knob can not be removed whilst in an ON or OFF position, however it can be removed by switching to an anti-clockwise 45° position. Suitable for surface or recess mounting by cutting a 52mm diameter hole. Specification: Material Description - Impact resistant plastic, Termination Stud Size - 2 x 10 mm, IP56, Max. Load Continuous - Continuous 275 A, Max. Load Intermittent - 455 Amps (5 minutes), Max. Load Cranking - 1250 A (10 seconds), Max. Voltage - 48V DC. Made in: New Zealand Voltage: 48 V Current: 275 A Current (A): 275.0
Product BEP 701 Battery Main Switch #14198 is marked with an EAN code 8702160000396.
Category | Plates, Switches, Locks, Batteries |
EAN | 8702160000396 |
Wall-mounted battery switch. Necessary for a simple economical way of separating two batteriesThe 701S is the most compact selector switch available on the market. While BEP recommends isolated battery systems as outlined with distribution clusters, the 701S provides a simple economical way of
Contour Lock system with removable plates for connection from all sides. This allows the switch to be a stand alone unit or locked together with battery distribution modules. The control knob can not be removed whilst in an ON or OFF position, however it can be removed by switching to an
As easy as 1, 2, 3, these revolutionary battery switches allow you to wire from the front. Never has installation been so easy and cabling so accessible. Optimized cable access makes installation a breeze. Pro Installer switches set the new benchmark with outstanding ergonomics, intuitive
Battery switch for electrical networks of ships, that consist of two or more batteries. Max. current - 800 A, constant current - 350 A. Dimensions - 127 x 127 x 85.7 mm. | Current: 350 A | Voltage: 12 V | Made in: South Korea | Current (A): 350.0
Battery switch for electrical networks of ships, that consist of two or more batteries. Max. current - 380 A, constant current - 280 A. Dimensions - 101 x 101 x 65.7 mm. | Current (A): 280.0 | Voltage: 12 V | Current: 280 A | Made in: Taiwan
Battery switch for 2 batteries, for surface mounting. Suitable up to 150 amp continuous load at 12 V, for a short time 300A. Switching possibilities: OFF, battery 1, battery 2 and both batteries. | Voltage: 12 V | Made in: China | Current (A): 150.0 | Current: 150 A
Casing with integrated battery switch. Watertight gasket included. 250A(1100 A for 10sec.max), dimensions: 95 x 95 mm. | Current (A): 250.0 | Current: 250 A | Made in: Italy
Casing with integrated battery switch. Watertight gasket included. 100A(500 A for 10sec.max), dimensions: 95 x 95 mm. | | Current (A): 100.0 | Current: 100 A | Made in: Italy
Made of black technopolymer with flange fixing. Equipped with watertight cap. Copper contacts. Max capacity - 100 A, flange Ø 58 mm, pins - 0,4 mm. | Current (A): 100.0 | Made in: Taiwan | Current: 100 A
4-position rotary switch with various waveforms. | Battery Type: 9V | Battery Operation: Yes | UK/EU Power supply included: No | Power Supply: Adapter or Battery | Type: Phaser | Made in: USA
depth switch. Powered via battery or optional 96DC200BI optional power supply, optional power supply: 109004 | Battery Type: 9V | True Bypass: Yes | Battery Operation: Yes | UK/EU Power supply included: No | Type: Chorus | Inputs: Mono | Outputs: Mono | Controls: Rate | Made in: USA | Power Supply: Adapter or Battery
Copper contacts, stainless steel springs; polycarbonate body; fitted with automatic power interruption on the alternator if the battery isolator activates before turning off the engine. Specially suited for diesel engines which, due to large starters, require heavy amperage; CE' type-tested in
semiand heavy distortion switch, 9V power by battery, optional power supply, with clean, offers compressor, legendary Headphone Amp for practising or recording, adjustable volume and aux stereo input/output, included headphone | Power Supply: Adapter or Battery | Rackmountable: No | USB: No | UK/EU Power
XLR-plug, battery- or phantom power, 182 gramm, on/off switch, condenser studiomicrophone for instument and vocal recording, batterypower with 1x 1,5 V AA, included clamp, cardioid, 80-20.000 Hz, 200 Ohms (270 Ohms battery), bag and battery | Made in: China | Battery Operation: No
Back light | • With a battery capacity of 30%, the light automatically switches to flash mode for maximum battery life.• Battery status indicator.• Lithium polymer battery (300mAh, 4.2V).• The electronic control system guarantees a constant amount of light emission over the entire lighting
Back light | • With a battery capacity of 30%, the light automatically switches to flash mode for maximum battery life.• Battery status indicator.• Lithium polymer battery (300mAh, 4.2V).• The electronic control system guarantees a constant amount of light emission over the entire lighting
gain output stage with kick switch and LED, true bypass, powered via battery or Dunlop optional power supply. Made in USA. | Type: Boost;Wah-Wah | Battery Operation: Yes | Made in: USA | Battery Type: 9V | UK/EU Power supply included: No | Power Supply: Adapter or Battery
48V phantom or battery power (1.5V, 100Hz-14kHz, guitar clip, low cut switch. Includes mic clip, adaptor included), 200ohm, windscreen and battery. (The battery/phantom power module has an XLR male output) 1,8 meter cable. | Battery Operation: Yes | Made in: Japan
large diaphragm studio microphone including stand mounting plate and case. Colour: Grey. | Length (mm): 187.0 | Application: Recording;Studio | Compatibility: iOS;PC | Compatible with: iOS;Windows;macOS;Android | Original Colour by Producer: Charcoal Gray | Signal to Noise Ratio: 81 dB | Impedance (Ohm):
Analog Distortion Pedal for EGuitar, Switch for Crunch Modus, 2 StatusLED, Works with 9VBattery or Dunlop ECB003 AC Adapter (optional not included), Control for Output, Tone and Distortion, Made in USA., | UK/EU Power supply included: No | True Bypass: Yes | Controls: Distortion;Output;Tone | Battery Type:
Sustain pedal with 6,3mm Jack. Suitable for keyboards and digital pianos. | | Battery Operation: No | Polarity Switch: Yes | Power Supply: Passive | Compatible with: Universal | UK/EU Power supply included: No | Type: Sustain Pedal | Made in: China | Colour: Black | Original Colour by Producer: Black | Cable Length:
frequency response: 80Hz-12kHz, on/off switch, 600 Ohms impedance, includes clip. | Type: Dynamic | Frequency Range: 80 Hz - 12 kHz | Polar Pattern: Cardioid | Battery Operation: No | Switch: Yes | Impedance: 600 Ohm | Package Contents: Microphone;Holder;Adapter | Weight: 340 g | Made in: China
excellent for toms, 50Hz16kHz, brass etc. Small size, robust body. Includes clip and bag. | Outputs: XLR | USB: No | Application: Instruments;Studio;Recording | Type: Dynamic | Headphone Output: No | Dimensions: Ø 42x161 mm | Frequency Range: 50 Hz - 16 kHz | Capsule Type: Dynamic | Impedance: 150 Ohm | Diameter: 42
includes 6m cable, unbalanced 6.3mm jack cable, volume knob, ideal for harmonica. | Headphone Output: No | Frequency Range: 100 Hz - 5 kHz | Sound Pressure Level (SPL): 94 dB | Outputs: Jack 6,3 mm | Sensitivity: -38 dBV/Pa | Original Colour by Producer: Green | Application: Instruments;Recording;Vocals | Type: