Prices and availability may change several times a day. Check the current data directly in the e-shops. You can find all available colors and sizes directly in the e-shops.
Contour Lock system with removable plates for connection from all sides. This allows the switch to be a stand alone unit or locked together with other switches. The control knob can not be removed whilst in an ON or OFF position, however it can be removed by switching to an anti-clockwise 45° position. Suitable for surface or recess mounting by cutting a 52mm diameter hole. Specification: Material Description - Impact resistant plastic, Termination Stud Size - 2 x 10 mm, IP56, Max. Load Continuous - Continuous 275 A, Max. Load Intermittent - 455 Amps (5 minutes), Max. Load Cranking - 1250 A (10 seconds), Max. Voltage - 48V DC. Made in: New Zealand Voltage: 48 V Current: 275 A Current (A): 275.0
Wall-mounted battery switch. Necessary for a simple economical way of separating two batteriesThe 701S is the most compact selector switch available on the market. While BEP recommends isolated battery systems as outlined with distribution clusters, the 701S provides a simple economical way of
Contour Lock system with removable plates for connection from all sides. This allows the switch to be a stand alone unit or locked together with battery distribution modules. The control knob can not be removed whilst in an ON or OFF position, however it can be removed by switching to an
As easy as 1, 2, 3, these revolutionary battery switches allow you to wire from the front. Never has installation been so easy and cabling so accessible. Optimized cable access makes installation a breeze. Pro Installer switches set the new benchmark with outstanding ergonomics, intuitive
Battery switch for 2 batteries, for surface mounting. Suitable up to 150 amp continuous load at 12 V, for a short time 300A. Switching possibilities: OFF, battery 1, battery 2 and both batteries. | Made in: China | Current (A): 150.0 | Voltage: 12 V | Current: 150 A
Battery switch for electrical networks of ships, that consist of two or more batteries. Max. current - 800 A, constant current - 350 A. Dimensions - 127 x 127 x 85.7 mm. | Current (A): 350.0 | Voltage: 12 V | Current: 350 A | Made in: South Korea
Battery switch for electrical networks of ships, that consist of two or more batteries. Max. current - 380 A, constant current - 280 A. Dimensions - 101 x 101 x 65.7 mm. | Current: 280 A | Made in: Taiwan | Voltage: 12 V | Current (A): 280.0
Casing with integrated battery switch. Watertight gasket included. 100A(500 A for 10sec.max), dimensions: 95 x 95 mm. | | Current: 100 A | Made in: Italy | Current (A): 100.0
Casing with integrated battery switch. Watertight gasket included. 250A(1100 A for 10sec.max), dimensions: 95 x 95 mm. | Current (A): 250.0 | Current: 250 A | Made in: Italy
XLR-plug, battery- or phantom power, 182 gramm, on/off switch, condenser studiomicrophone for instument and vocal recording, batterypower with 1x 1,5 V AA, included clamp, cardioid, 80-20.000 Hz, 200 Ohms (270 Ohms battery), bag and battery | Made in: China | Battery Operation: No
Back light | • With a battery capacity of 30%, the light automatically switches to flash mode for maximum battery life.• Battery status indicator.• Lithium polymer battery (300mAh, 4.2V).• The electronic control system guarantees a constant amount of light emission over the entire lighting
Back light | • With a battery capacity of 30%, the light automatically switches to flash mode for maximum battery life.• Battery status indicator.• Lithium polymer battery (300mAh, 4.2V).• The electronic control system guarantees a constant amount of light emission over the entire lighting
Made of black technopolymer with flange fixing. Equipped with watertight cap. Copper contacts. Max capacity - 100 A, flange Ø 58 mm, pins - 0,4 mm. | Current (A): 100.0 | Made in: Taiwan | Current: 100 A
1 space power box unit for 19' cabinets and racks. Power box with a mains switch on the front and 7 sockets on the rear. The power output is 3500 watts. Thanks to the removable mounting brackets on both sides, the multi-socket outlet can be installed in different directions. | Rackmountable:
1 space power box unit for 19' cabinets and racks. Power box with a mains switch on the front and 7 sockets on the rear. The power output is 3500 watts. Thanks to the removable mounting brackets on both sides, the multi-socket outlet can be installed in different directions. | Rackmountable:
semiand heavy distortion switch, 9V power by battery, optional power supply, with clean, offers compressor, legendary Headphone Amp for practising or recording, adjustable volume and aux stereo input/output, included headphone | Battery Operation: Yes | Made in: USA | Power Supply: Adapter or
depth switch. Powered via battery or optional 96DC200BI optional power supply, optional power supply: 109004 | Made in: USA | Inputs: Mono | Outputs: Mono | True Bypass: Yes | Power Supply: Adapter or Battery | UK/EU Power supply included: No | Battery Operation: Yes | Controls: Rate | Battery Type: 9V | Type: Chorus
Copper contacts, stainless steel springs; polycarbonate body; fitted with automatic power interruption on the alternator if the battery isolator activates before turning off the engine. Specially suited for diesel engines which, due to large starters, require heavy amperage; CE' type-tested in
The Escapists 2 by Team 17 is a sandbox strategy simulator where the main task is of course to escape! The quirky visuals in fact hide quite rebellious and complex idea beneath. You are controlling a convicted felon, you are put in confinement facility, and all you desire is to escape by any means
Michel Ancel, the main creative force behind Rayman, Beyond Good & Evil, and Raving Rabbits returned to create the fifth and final main installment in the celebrated Rayman series - Rayman Legends Definitive Edition Nintendo Switch key! A direct sequel to 2011 Rayman Origins, this
48V phantom or battery power (1.5V, 100Hz-14kHz, guitar clip, low cut switch. Includes mic clip, adaptor included), 200ohm, windscreen and battery. (The battery/phantom power module has an XLR male output) 1,8 meter cable. | Battery Detail: Li | Battery Operation: Yes | Made in: Japan
1-channel low-noise microphone preamplifier,for mains operation or battery operation.1 microphone input, XLR, bal.. Gain control, 11 steps, 20-70 dB. LED green/red for indicating operation/peak. Phantom power +24 V, can be activated as required. Switchable microphone phase. Low cut: 100 Hz, high
gain output stage with kick switch and LED, true bypass, powered via battery or Dunlop optional power supply. Made in USA. | UK/EU Power supply included: No | Battery Operation: Yes | Type: Wah-Wah;Boost | Battery Type: 9V | Made in: USA | Power Supply: Adapter or Battery
large diaphragm studio microphone including stand mounting plate and case. Colour: Grey. | Compatibility: PC;iOS | Sound Pressure Level (SPL): 154 dB | Signal to Noise Ratio: 81 dB | Polar Pattern: Cardioid | Impedance: 150 Ohm | Impedance (Ohm): 150.0 | Diameter (mm): 55.9 | Package Contents: Stand Mount;Carrying
1 space power box unit for 19' cabinets and racks. Power box with a mains switch on the front and 8 sockets on the rear. The power output is 3500 watts. Thanks to the removable mounting brackets on both sides, the multi-socket outlet can be installed in different directions. | Number of Slots: