Fluid Audio Image2

With support for Sonarworks SoundID Reference calibration import, the room calibration software will be integrated directly into Image 2 studio monitors.Giving users the ability to create their own calibration profile for their monitor setups to remove unwanted coloration and experience the most accurate studio reference sound for any studio or home environment.The Image 2 is also a 2 in 1 monitor: A full range mixing and mastering system that can switch into a console “mixcube” at the press of a footswitch. Mixcube mode enables engineers to dial-in low end and midrange levels for even playback on many “bass challenged” devices. It further helps with the adjustment of vocals, nailing the kickdrums and overall balance.The newly developed AMT tweeter delivers precise, detailed response, expansive headroom, and low distortion, while the aluminum cone mid-range driver utilizes a shorting ring within its motor structure to substantially reduce harmonic distortion. Focusing the magnetic flux and concentrating it within the voice coil gap reduces modulation movement of the voice coil which makes the variation of system inductances more linear as input current varies. The end result is accuracy so clean; mixing takes on a whole new flow.The opposed, Dual 8″ ultra-long-throw bass woofers are interlocked at their magnets from within and add improved cabinet stability and provide extended bass response (+/- 4.6dB 28Hz-20kHz; +/- 2.0dB 80Hz-20kHz). Each bass driver is individually powered by the latest state of the art 225W Class-D amplifier.Driving the entire system is the newly developed Class-D Quad amplifier. Spending the most development time on this important element, the Image 2 amp has extremely low self-noise, very low distortion, improved THD+N performance, improved IMD performance, and lower output impedance. The Image 2’s sealed enclosure design provides a natural, 6db/oct roll off for a more controlled low frequency response. This translates into less likelihood of unwanted interaction with the room, which means these monitors are less sensitive to positioning. Woofer: 8' LF Driver Power Amp: 225 W Type: Active Frequency Range: 28 Hz - 20 kHz MF Driver Type: Aluminum cone Crossover Frequency: 2800 Hz;115 Hz Sound Pressure Level - SPL (dB): 116.0 Net Weight (kg): 12.6 Controls: Ground/Lift Switch;Low;Channel;Input;Mid;High;Volume;Standby Middle Speaker: 5' Sample Rate: 192 kHz / 24 bit Power Supply: 230V Inputs: Footswitch;Jack 6,3 mm TRS;XLR;RCA;USB;SPDIF Height (cm): 35.1 Tweeter: 1,5' MF Driver Power Amp: 150W Made in: China Width (cm): 24.1 Depth (cm): 36.3 Power RMS: 675 W HF Driver Power Amp: 75W HF Driver Type: Air Motion Transformer LF Driver Type: Paper Cone Amplification configuration: Tri-amp EQ: No Package Contents: Power Cable Bass Reflex Port: No USB: Yes Colour: Grey