Lowest price in the last 45 days: £ 173
Prices and availability may change several times a day. Check the current data directly in the e-shops. You can find all available colors and sizes directly in the e-shops.
CIOKS 8 is our largest switch-mode power supply and it features 8 isolated outlets which each deliver 9V DC with 660mA. Four of the outlets offer four selectable voltages (9V, 12, 15 and 18V). CIOKS 8 was designed to be used in two different ways: as a large extension to DC7 in case you need more outlets or as a stand-alone power supply. If you want to use CIOKS 8 as an extension to DC7, simply connect the CIOKS 8 to the courtesy 24V on your DC7 and you are good to go. If you are looking for a super powerful power supply setup to power a large pedalboard, the combination of CIOKS DC7 and CIOKS 8 will definitely be an awesome solution where this combo will give you 15 isolated outlets in total plus a 5V USB outlet to charge your smartphone or tablet. In case you want to use CIOKS 8 as a stand-alone power supply, you can power it with an adapter putting out anything from 9V to 24V DC or 9V to 12V AC. This means you can easily power it with the type of adapter you would normally use to run a single effects pedal, a laptop adapter or any other common adapter you have laying around. To get the full output power of all 8 isolated outlets the supply voltage to CIOKS 8 should be 24V DC. Made in: Poland Number of Outputs: 8
CIOKS 8 is our largest switch-mode power supply and it features 8 isolated outlets which each deliver 9V DC with 660mA. Four of the outlets offer four selectable voltages (9V, 12, 15 and 18V). | | CIOKS 8 was designed to be used in two different ways: as a large extension to DC7 in case you need more
CIOKS 4 is a practical expansion module for the CIOKS DC7 multi-power supply. CIOKS 4 offers four isolated DC outputs with selectable voltage (9/12/15 / 18V) and a maximum current of 660 mA on each output at 9V DC voltage (12V DC - 500 mA, 15V DC - 400 mA, 18V DC - 330 mA) . It can be powered from
Power supply. Features: AC10 is a member of CIOKS professional range of dedicated multi-output power supplies for effect pedals. Its two powerful AC sections with 800 mA each offer voltages 9, 12 and 16 V AC. If you have one or two pedals in your setup, which requires an AC power source, AC10 is
SOL is the ultimate solution for bringing life to a small to medium-sized pedalboard setup, especially if you are using power-hungry pedals. SOL is the smallest mains-powered switch-mode power supply they make at CIOKS (no wall-warts here) and the no-frills design plus massive power will leave you
Power supply. Features: 20th anniversary edition. With some additions and a slightly different design get the DC10 and AC10 power supplies in one box. CIOKS CIOKOLATE power supply will power several high current digital pedals, high voltage 18, 24 or even 40 V pedals, one or two AC pedals, one or
Power supply. Features: 20th anniversary edition. With some additions and a slightly different design get the DC10 and AC10 power supplies in one box. CIOKS CIOKOLATE power supply will power several high current digital pedals, high voltage 18, 24 or even 40 V pedals, one or two AC pedals, one or
When you are building the ultimate pedalboard you need the ultimate in flexible, powerful and reliable power supply and the combination of the CIOKS DC7 and the CIOKS 8 Expander is just ideal. | Voltage: 9V;15V;24V;18V;5V;12V | Package Contents: Manual;Flex Cable;Mounting Kit;Power Cord | Colour:
Power supply. Features: DC8 is a professional medium sized multi-output power supply for effect pedals. It has 8 regulated and well-filtered DC outlets configured in 6 isolated sections. With a total of 1.000 mA it’s a perfect solution for small or medium size rigs with pedals only using a DC
Power supply. Features: DC8 is a professional medium sized multi-output power supply for effect pedals. It has 8 regulated and well-filtered DC outlets configured in 6 isolated sections. With a total of 1.000 mA it’s a perfect solution for small or medium size rigs with pedals only using a DC
Professional power supply for effect pedals with compact design and switch mode. Features groundbreaking 2,54 cm profile. 7 isolated outlets - 660 mA at 9 V DC on each outlet. 4 different voltages on each outlet. 5V USB outlet. 24 V DC auxiliary outlet. Expandable with CIOKS 4 or CIOKS 8. Built-in
Power supply. Features: DC10 is a professional multi-output power supply for effect pedals. It has 10 regulated and well-filtered DC outlets configured in 8 isolated sections. With a total of 1.600 mA it’s a perfect solution for bigger rigs with pedals only using a DC power source. Its three
Power supply. Features: DC10 is a professional multi-output power supply for effect pedals. It has 10 regulated and well-filtered DC outlets configured in 8 isolated sections. With a total of 1.600 mA it’s a perfect solution for bigger rigs with pedals only using a DC power source. Its three
Manufactured from high quality EPS (Expanded Polystyrene), the Trap Fuser is a unidirectional panel that controls sound reflections in two different ways – absorption and diffusion. Its hybrid structure allows sound energy to either be trapped in the cavities, or scattered by the plain surfaces
Manufactured from high quality EPS (Expanded Polystyrene), the Trap Fuser is a unidirectional panel that controls sound reflections in two different ways – absorption and diffusion. Its hybrid structure allows sound energy to either be trapped in the cavities, or scattered by the plain surfaces
Tube amp expander. First-of-its-kind tube amp command center, built with Waza expertise and the Tube Logic design approach. Advanced variable reactive load circuit with discrete analog components supports tube amps up to 150 watts. User-adjustable impedance tuning correctly matches the reactive
Compact and portable 3button footswitch pedal for use with several DigiTech products, including The Jimi Hendrix Experience, The JamMan, or Expression Factory. Pedal provides increased functionality and convenient Handsfree control over up/down selection of Models, Mode changes, Loop selection,
The GA-FC EX provides expanded foot control functionality for select BOSS amplifier models. It maintains the simple setup and intuitive workflow of the standard GA-FC while offering additional functions for greater performance flexibility. The GA-FC EX builds on the standard GA-FC with several
The Katana-50 MkII EX expands on the capabilities of the popular Katana-50 MkII model,providing more performance versatility in the same portable design.GA-FC and GA-FC EX support allows you to select Tone Setting memories, turn effects on/off, and more with dedicated foot controllers. There’s
1 x 12', 60W Combo Guitar Amplifier with Digital Reverbs, and Effects Loop. Orange Amplifiers expands its line of solid-state Crush amps with new CR60C 60-watt 1 x 12' Combo. This Crush amp delivers more authentic Orange tone than ever, with both amp channels being designed after the Rockerverb
Expanded 1U rack-mount version of Tech 21’s popular SansAmp Bass Driver DI pedal that provides a dedicated Mid control and an XLR Output Level control for optimum performance with PA systems, in addition to original Drive, Presence, and active Bass and Treble controls. It also features an Effect
The TAL-J-8 is a very accurate emulation of the popular 80’s hardware synthesiser and calibrated after Jupiter 8 device. All sounds are generated in realtime without the use of any samples with the same endless modulation possibilities like the hardware and useful additional features like the
ONE FORSTRINGS 8 is a 200 Watt bi-amplified acoustic guitar amplifier, with an 8” Woofer and Tweeter compressor.The amplifier is equipped with 3 inputs (2 Mic-Line and 1 Line) complete with PEAK LED, GAIN, 4-band equalizer, SEND effect and volume.It is an extremely versatile product with
A powerful multi-band dynamics processor useful for mastering, track processing, sound design, and noise reduction. MultiDynamics provides up to 6 bands with independent compression or expansion/gating per band. Multiband dynamics processing combines the techniques of equalization and dynamics
The SYSTEM-8 draws on Roland deep history of synthesizer research and development, with circuit-accurate models of classic Roland oscillators, filters, and effects. It includes legendary third-party oscillator types as well, plus the famous JUPITER and JUNO filter designs for super-authentic