DPA DAD6017 #1296528

DPA DAD6017

DPA DAD6032

Special adapter for an original DPA MicroDot and a TA-4F Switchcraft connector that connects the DPA's d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to adapter for Beyerdynamic OPUS wireless systems, providing

DPA DAD6033

Special adapter for an original DPA MicroDot and a 4-pin Hirose connector that connects the DPA's d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to Audio-Technica wireless systems, providing flexible, simple and

DPA DAD6021

Special adapter for an original DPA MicroDot and TA-5F connector that is ideal for normal sound pressure level (0 dB attenuation) and connects the DPA's d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to

DPA DAD6010

Special original DPA microdot to TA-4F Switchcraft adapter that connects the DPA's d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to adapter for Shure, TOA, PGXI and Line 6 wireless systems, providing flexible,

DPA DAD6003

Special miniature adapter for a 3-pin Lemo that connects the DPA's d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to Sennheiser, Trantec, Shure, Wisycom wireless systems, providing flexible, simple and

DPA DAD6001-BC

Adapter for powering Miniature Microphones via standard P48 phantom power. Designed for use with miniature microphones from DPA. Belt clip is included. This adapter is active-signal balanced, which improves suppression of induced electromagnetic noise. Common Mode Rejection Ratio (CMRR) is better

DPA DAD6034 - Sennheiser Evolution/G2/G3/D1, X2 Digital Wireless, Audio Ltd En2 TX

Adapter that connects the d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to Sennheiser Evolution/G2/G3/D1, X2 Digital Wireless, Audio Ltd En2 TX wireless systems. The adapter comes with an original DPA MicroDot

DPA 4018V-B-SE2 d:facto 4018V Vocal Condenser Microphone

The black d:facto II Supercardioid Vocal Microphone Capsule with SE2-ew Connector from DPA Microphones is for sound reproduction. It is used to capture audio in various application for live stage, rehearsals, DJ setups, and more. It allows for seamless integration with Sennheiser 2000, 9000,

DPA 4018VL-B-SE2 d:facto 4018VL Vocal Condenser Microphone

The black d:facto II Supercardioid Vocal Microphone Capsule with SE2-ew Connector from DPA Microphones is for sound reproduction. Its engineered for vocal performances onstage, and can be used to capture and accurately replicate a singer's voice transparently. It allows for seamless integration

Shure WA-330 MINI XLR Connector

4pin miniconnector adapts a smalldiameter microphone cable to a bodypack transmitter

DPA CM2218B00 Black 180 cm

Replacement cable for the DPA d:vote 4099 instrument microphone. It has a reinforced construction with black color design. The cable can also be used as a MicroDot - MicroDot extension cable. | Type-A Connector: MicroDOT | Length: 180 cm | Made in: Denmark | Type-B Connector: MicroDOT | Colour: Black | ~

DPA CM1618B00 Black 180 cm

Replacement cable for DPA d:vote 4099 instrument microphone. It has a durable black construction. The cable can also be used as an extension cable. It is equipped with two MicroDot - MicroDot connectors. | ~ Length: 0,3 m | Length: 180 cm | Made in: Denmark | Type-B Connector: MicroDOT | Colour: Black | Type-A

Bespeco HDJM900 Black 9 m

Low capacity microphone cable with hybrid connector from the Silos series. Low capacity keeps all the frequencies unchanged (not cutting the high frequencies). As a result cable has a clean and bright sound that is accurate to its source. Capacity depends mainly on the construction material of

AKG MDA5 AT

Adapter for Audio-Technica. The MDA5 AT adapter connector links every AKG Microlite microphone with an Audio-Technica bodypack transmitter with 4-pin locking connector. | Made in: China

MiPro MJ-53

Condenser microphone adaptor that enables a condenser microphone with mini XLR plug to connect directly to the XLR jack input of a mixer which provides 12–48V DC phantom power. The high output impedance of a condenser microphone will be transformed to low output impedance at about 200 Ohms. The

AKG MDA1

Adapter XLR female. The MDA1 adapter connector links every AKG MicroLite microphone with an AKG bodypack transmitter with 3-pin Mini-XLR input. | Made in: China

AKG MDAi CPA Mic Adapter XLR Connector

PA microphone adapter that allows any dynamic vocal microphone to instantly become part of the HARMAN Connected PA system. Simply attach the device to any input of the Soundcraft Ui24r mixer and then plug-in the dynamic microphone and microphone cable for automatic recognition with the HARMAN

Rycote PCS 3/8 Classic Boom Connector

The PCS-Boom Connector is an incredibly convenient and efficient way to simplify and speed-up the fitting and removal of any accessory to a 3/8″ male threaded boom pole. And, importantly, it provides a completely secure and silent connection during use!A range of optional attachment products are

TIE TXLRD3

Phantom power adapter for connecting TIE instrument and other microphones with 3-pin mini XLR connection to a mixer or audio interfaces with 48 volt phantom power. | Made in: China | Type: Reduction | Type-B Connector: XLR mini Male | Type-A Connector: XLR Male

DPA 4188-DC-F-F00-LE

The beige d:fine Core 4188 Slim Directional Flex Earset Mic with 120mm Boom and MicroDot Connector from DPA combines the sound of the d:fine 4088 directional capsule and Core amplifier in a lightweight and flexible one-ear earset that offers accurate, highly intelligible speech and plenty of

Maono XU01

The black microphone cable is equipped with USB - XLR female connectors. | Type-A Connector: USB | Type-B Connector: XLR Female | Made in: China

Rode MiCon-5

The RODE MiConTM connector system provides seamless integration between the RODE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-5 is designed to connect to a standard 3 pin XLR, with P48 phantom power. Dimensions: 61,8 x 30,1 x 21 mm. Weight: 50 g. | Made

Rode MiCon-6

The RODE MiConTM connector system provides seamless integration between the RODE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-6 is designed to connect to AKG transmitters PT40, PT60, PT61, PT80, PT400, PT2000 and PT4000, as well as the Audix RAD-360