Prices and availability may change several times a day. Check the current data directly in the e-shops. You can find all available colors and sizes directly in the e-shops.
The Mercury microphone is handmade in the UK from the finest components, capable of providing breathtaking recordings of virtually any sound source.All components in this microphone are strictly controlled and are manufactured with a precision not normally found in other microphones. You can be sure that you will always have crystal clear sound and perfect reproduction of vocals and instruments with all the details. The hand-picked ECC81 / 12AT7 tube will give the sound the warmth that makes lamp microphones so popular.On the power supply, you will then find a continuous setting of the directional characteristic, thanks to which you can choose from a practically unlimited number of characteristics - from spherical, through cardioid, to octal and anything in between. In addition, the source is also equipped with a function for attenuating loud sound sources, a filter and a special circuit, which guarantees extremely quiet operation. Application: Studio Application: Recording Capsule Type: Condenser Made in: United Kingdom Diameter (mm): 90.0 Filter: Linear - 75Hz Frequency Range: 20 Hz - 20 kHz Incl. Gig bag/Case: Case Polar Pattern: Omnidirectional Polar Pattern: Cardioid Polar Pattern: Figure 8 Impedance: 200 Ohm Outputs: XLR Package Contents: Wooden Box Package Contents: Shockmount Package Contents: 8-pin / 3-pin cable Package Contents: Flight Case Phantom Power: No Sensitivity: 18 mV Sound Pressure Level (SPL): 125 dB Switch: No Weight: 744 g
Product Sontronics Mercury has an EAN code 5060173280550.
Category | Components, Microphones |
EAN | 5060173280550 |
Professional desktop microphone stand suitable for live radio broadcasting, dubbing recording, creation of original videos on your Youtube channel, or video calls with your boss. You can place all types of microphones and microphone holders on the thread, the construction made of durable aluminum
Professional set for podcasting that provides all the necessary components for recording including the Samson's C01U Pro USB studio condenser microphone, MD2 cast-iron desktop microphone stand, SR850 semi-open-back studio headphones, a USB cable and convenient moulded carry case. With a smooth,
The hearmix® PRO is an active ambience sound system. A special cable with built-in microphones allows the infinitely variable control of the outside sound by the musician himself on the body (no extra technicians, mixing console, additional microphones needed). The audience and ambient sounds
Microphone cable feature a high-quality design made with superior components that are built to last. Dual-conductors deliver a reliably clear signal and natural frequency response. Multiple shielding materials preserve the signal with low handling noise, and the durable PVC jacket exterior ensures
Condenser microphone adaptor that enables a condenser microphone with mini XLR plug to connect directly to the XLR jack input of a mixer which provides 12–48V DC phantom power. The high output impedance of a condenser microphone will be transformed to low output impedance at about 200 Ohms. The
The Blimp Extension is an add-on component kit for the original RODE Blimp windshield system that allows the use of long shotgun microphones, including the RODE NTG8 and any shotgun with barrel length of up to 600 mm. The kit includes a 256 mm blimp extension piece, two sets of rigid silicone
Sierra Mercury/Mariner Starter Drive Assembly - Replaces OEM Mercury/Mariner 68575, 68575310 Tooth | Made in : China
PA microphone adapter that allows any dynamic vocal microphone to instantly become part of the HARMAN Connected PA system. Simply attach the device to any input of the Soundcraft Ui24r mixer and then plug-in the dynamic microphone and microphone cable for automatic recognition with the HARMAN
Adapter for Audio-Technica. The MDA5 AT adapter connector links every AKG Microlite microphone with an Audio-Technica bodypack transmitter with 4-pin locking connector. | Made in: China
Unlike other compact mics out there, EM-93M is built with professional-grade components that deliver clearer, more defined sound that is crucial for mobile productions. With cables for both smartphones and DSLRs, you are ready to connect right out of the box, plus included mounting hardware makes
4pin miniconnector adapts a smalldiameter microphone cable to a bodypack transmitter
Adapter for powering Miniature Microphones via standard P48 phantom power. Designed for use with miniature microphones from DPA. Belt clip is included. This adapter is active-signal balanced, which improves suppression of induced electromagnetic noise. Common Mode Rejection Ratio (CMRR) is better
Adapter XLR female. The MDA1 adapter connector links every AKG MicroLite microphone with an AKG bodypack transmitter with 3-pin Mini-XLR input. | Made in: China
Special adapter for an original DPA MicroDot and TA-5F connector that is ideal for normal sound pressure level (0 dB attenuation) and connects the DPA's d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to
The triple propeller is part of standard equipment for most Mercury / Mariner / Mercruiser engines. Recommended for use on ships up to 250 HP and up to 50 MPH for all types of hinged marine engines and built-in Mercruiser Alpha One and Bravo One gear units. It is a high quality aluminum cast in an
Phantom power adapter for connecting TIE instrument and other microphones with 3-pin mini XLR connection to a mixer or audio interfaces with 48 volt phantom power. | Made in: China | Type: Reduction | Type-B Connector: XLR mini Male | Type-A Connector: XLR Male
The triple propeller is part of standard equipment for most Mercury / Mariner / Mercruiser engines. Recommended for use on ships up to 250 HP and up to 50 MPH for all types of hinged marine engines and built-in Mercruiser Alpha One and Bravo One gear units. It is a high quality aluminum cast in an
Genuine Mercury Marine Part for Mercruiser Sterndrive Engines.See below for full application list.Dimensions: Length: 52.5 inches (1,334mm) Top Width: 0.453 inches (11.5mm)P/N: 57-816295QThis part supersedes part numbers: 57-816295T - V-BELT 57-816295 - BELTApplications: Mercruiser
The triple propeller is part of standard equipment for most Mercury / Mariner / Mercruiser engines. Recommended for use on ships up to 250 HP and up to 50 MPH for all types of hinged marine engines and built-in Mercruiser Alpha One and Bravo One gear units. It is a high quality aluminum cast in an
Three-blade premium aluminum propeller designed for Mercury / Mariner 135-300HP, Mercruiser ALPHA / BRAVO I. It is a high quality aluminum cast in an attractive design (Black Phantom) with easy maintenance. Propeller diameter – 14'', propeller pitch – 23“, RH. | Diameter (inch): 14.0 | Number of