Lowest price in the last 45 days: £ 85,50
Prices and availability may change several times a day. Check the current data directly in the e-shops. You can find all available colors and sizes directly in the e-shops.
Six-button assignable footswitch pedal for Marshall JMD100 series digital amplifiers. Made in: China
Product Marshall PEDL 10048 Footswitch belongs to the product group Musical instruments, belongs to the brand Marshall, you can find it at the store Muziker.uk.
Product Marshall PEDL 10048 Footswitch is marked by the EAN code 5030463208748.
Category | Musical instruments, Amplifiers, Pedals |
Brand | Marshall |
E-shop | Muziker.uk |
EAN | 5030463208748 |
Six-button assignable footswitch pedal for Marshall JMD100 series digital amplifiers. | Made in: China
Twobutton footswitch pedal for Marshall MG4 series amplifiers that allows for switching the Clean/Crunch channel and turning the Overdrive on or off. It is compatible with the MG50FX, MG101FX, MG102FX and MG100HFX models. | Made in: Vietnam
2-way footswitch controller pedal for Marshall Vintage Modern amplifiers. Seamlessly switch between Dynamic Range and Reverb modes with this. | Power Supply: Passive | Battery Operation: No | Type: Footswitch | Colour: Black | Made in: China | Number of Buttons: 2
The Marshall PEDL-00040 Footswitch is a single tap tempo footswitch. The Marshall PEDL 00040 Footswitch is to be used with the Marshall Echohead Effects Pedal. | Battery Operation: No | Colour: Black | Made in: China | Power Supply: Passive | Type: Footswitch | Number of Buttons: 1
Heavy-duty dual-latching footswitch pedal with twin LED indicators that is suitable for Marshall amplifiers. It features a stereo jack that plugs into the amp's pedal connection. Pedal is designed to work with Marshall DSL401, VS100R, SV100RH, and VS102R amplifiers. | Number of Buttons: 2 | Made in:
Compact 2-button footswitch controller that was specifically designed for amplifiers from Marshall’s MG series. It features two buttons – Channel and Reverb, 1/4' plug and cable. | Made in: Vietnam | Number of Buttons: 2
Specially created for the Acoustic series. This single latching footswitch will enable you to change between channels with ease. It has a built-in indicator light to inform you whether the switch is activated or not. | Compatible with: AS100D;DSL401;AVT50;DSL201;DSL100;AVT50H;DSL50;VS65R | Colour:
Compact 4-button footswitch controller that was specifically designed for Marshall’s MG series IV, and provides 4 assignable buttons with LED status indicators. It allows switching between Clean/Crunch, adding a volume boost via Overdrive, adjusting the speed of the delay or modulation effects
A single latching footswitch built for DSLH and DSL1C. With this footswitch you can easily change between the ultra gain and classic gain channels on the amp. It has indicator lights so that you can see when it is in use. | Power Supply: Passive | Made in: China | Colour: Black | Number of Buttons:
This is a 2-way latching footswitch that has been made for the Origin series. The first switch will activate the gain boost available in all models to give you that added crunch. The second switch enables you to bypass your FX loop. The footswitch has indicator lights that inform you when the
Footswitch. Optional upgrade for Marshall Code 25, 50 and 100 amp. Lets you recall three of your favorite presets. Cycles through sound banks discreetly. LED readout lets you know what bank you're on. Rugged construction. Colour: Black. | Number of Buttons: 4 | Made in: Vietnam
High quality footswitch made of durable material without LED. Switch is designed to switch channels on Marshall guitar amps. Footswitch is suitable for Marshall DSL50, DSL100, DSL401, EL34 50/50, 100/100 EL34, EL84 20/20, MB30, MB60, MB150, G30RCD, G50RCD, G80RCD, G100RCD, JCM600, JCM601, JCM602,
Every good pedalboard setup needs an amp footswitch or two. If you’re gunning your signal through a Marshall amp, then there’s no better fit than a Marshall footswitch. The Marshall PEDL-00021 five-button footswitch is built specifically for the company’s TSL series of amps. It’s durable,
A 2-way latching footswitch for DSL5, DSL20C, DSL20H, DSL40 and DSL100. The first switch will enable you to change between the ultra gain and classic gain channels. The second switch is an FX loop bypass. There are built in indicator lights that notify you when the switch is active or not. | Number
For the JVM 2 channel amps this 4-way momentary footswitch allows you to take your sound with you. This footswitch is fully programmable so that you can build in your favourite settings and save them. There are also indicator lights that will help to guide you through your settings. | Type:
Foot control, 1-button foot switch for Marshall Vintage 1974X. | Made in: Great Britain
Footswitch control pedal that is compatible with Roland and BOSS amplifiers and allows for expansion as well, providing inputs for two expression pedals for real-time control of volume and drive. With Function switch, Manual switch and Channel 1 to Channel 4 switches it allows for switching
Dual footswitch pedal that was made especially for Vox amplifiers and is compatible with Valve Reactor series (AC30VR, AC15VR), AC Custom series (AC15C1, AC30C2(X)), all Night Train G2 models, Pathfinder and Cambridge amps. It features high-quality durable all-metal construction with twin LED
Two-button channel/reverb footswitch pedal that works with various Fender amplifiers and effect pedal. | Made in: Mexico
Passive footswitch pedal that allows plugging a single guitar into two amplifiers or plugging two guitars into a single amplifier, making it easy and convenient to create a rig with eminent flexibility and a variety of tone options. “A or B” and “A and B” switching options allow for greater
2 channels, 2x master volume controls, programmable 4way footswitch, reverb, speakeremulated line out plus MIDI connections. | USB: No | External FX Loop: Yes | UK/EU Power supply included: No | Power (Watt): 50.0 | Power: 50 W | Type of Electronics in the Power Amplifier: 2x EL34 | Made in: Great
Footswitch pedal that provides six individual footswitches for remote control of programmable functions and works with TC-Helicon VoiceLive Touch 2, VoiceLive 3, and Play Electric vocal/guitar processors. It extends the control of these processors to fit any unique performance style and needs. The
emulated DI out, 4 channel tube amp with 12 sounds switchable by footswitch or MIDI. Programmable effects loop with hardware bypass, MIDI in and MIDI thru. 5x ECC83 and 4x EL34 valves. Includes footswitch. dimensions: 750 x 310 x 215mm. Weight: 22kg, digital reverb, insert loop with hardware
Footswitch is designed to bring even more control to RevivalDRIVE, allowing access to the pedal’s MID ENGAGE and BLEND OVERRIDE functions. Built to the same tour–grade standard as the RevivalDRIVE, and supplied with a premium quality patch cable, the Revival Footswitch takes the flexibility of