Lowest price in the last 45 days: £ 26,90
Prices and availability may change several times a day. Check the current data directly in the e-shops. You can find all available colors and sizes directly in the e-shops.
24' long x 34mm diameter hexagonal pipe made from aluminium. Using a complex cross section design combined with the aluminium alloy creates pipes that are significantly lighter in weight while providing greatly improved strength—as much as double that of conventional round pipe. Made in: China Compatible with: Hex Rack Material: Steel
Product Yamaha HXCP24II Drum Rack has an EAN code 4957812514330.
Material | Steel |
Category | Hexagon |
EAN | 4957812514330 |
24' long x 34mm diameter hexagonal pipe made from aluminium. Using a complex cross section design combined with the aluminium alloy creates pipes that are significantly lighter in weight while providing greatly improved strength—as much as double that of conventional round pipe. | Made in:
Several clamps for securing tubes of different thickness (15 –34 mm, including hexagonal tubes) are connected to the extended arm. These clamps can be used to secure tubes positioned far from each other. Each clamp has a gear joint, enabling fine angle adjustment. | Made in: China | Compatible with:
The cross clamp is used to connect two hexagonal tubes at 90-degree angles (for example, to connect a leg tube with a tube that has been horizontally set). | Material: Steel | Compatible with: Hex Rack | Made in: China
36' long x 34mm diameter hexagonal pipe made from aluminium. Using a complex cross section design combined with the aluminium alloy creates pipes that are significantly lighter in weight while providing greatly improved strength—as much as double that of conventional round pipe. | Material:
The HXREXII creates a three-leg rack when combined with the HXR2LII. | Made in: China | Compatible with: Hex Rack;HXR2LII | Maximum Height: 580 mm | Material: Steel | Package Contents: T-Leg;Tom Clamp;Side Bar;Tube Clamp
Clamp for tom holder/cymbal attachment with an adapter. With the adapter: 16 mm, without the adapter: 22.2 mm. | Material: Steel | Made in: China
The basic HEXRACKII set consists of two legs and is fully compatible with Yamaha System Hardware. Compared to a typical hardware setup, the HEXRACKII uses less space and reduces floor clutter produced by stand legs, etc., around the kit. The system’s pipes and racks are made from aluminium, which
The double bass is used to horizontally set two tubes at the same height - as in a double-bass configuration. Settings at various angles are possible when used with the clamp gear joint. | Compatible with: Hex Rack | Made in: China | Material: Steel
The TPCL500 is great for adding an extra tom pad to your tube-style electronic drum rack system (excludes HexRack). The clamp and holder are both included to expand your DTX series kit. | Made in: China
The open clamp is used to attach tubes having different thickness (diameter 15-34mm, including hexagonal tubes) to the hexagonal tube. Although fine angle adjustment is possible with the gear joint, more stable setting can be achieved by limiting the movement only to the vertical direction. | Made
This clamp attaches a tom clamp (CL945B, etc.) or cymbal holder (CH755, etc.) to the hex-shaped pipe and is compatible with 22.2mm diameter pipes. Its vertical angle is freely adjustable. | Material: Steel | Compatible with: Hex Rack | Made in: China
T-shaped leg for HexRackII (clamp and pipes are made from aluminium). Vertical pipe length: 23' (approx. 58cm). | Compatible with: Hex Rack | Maximum Height: 580 mm | Made in: China | Package Contents: T-Leg | Material: Steel
T-shaped leg for HexRackII (clamp and pipes are made from aluminium). Vertical pipe length: 30' (approx. 76cm). | Package Contents: T-Leg | Material: Steel | Made in: China | Compatible with: Hex Rack | Maximum Height: 762 mm
The Chrome Right Angle Drum Rack Clamp is designed to create joints between vertical drum rack supports and any straight or curved horizontal drum rack bar. | Made in: Taiwan | Material: Chrome
Set of two casters for drum racks with brakes. Finish: Chrome | Made in: Taiwan
Bass drum mono trigger from Yamaha. Compatible with any bass drum with wooden hoops. Chrome-plated metal casing. Knurled screw for setting the sensitivity of the sensor. Including cable. Compatible with Yamaha DTX900M, DTX700, DTX502 and DTXM12 modules. Dimensions: 45 x 97 x 86/95 mm. Weight: 340
Introducing the Yamaha FGDP-30 Finger Drum Pad, designed for the ultimate finger drumming experience. With its ultra-sensitive pads arranged in an ergonomic layout, this instrument is perfect for unleashing your rhythmic creativity.Ultra-Sensitive Pads: The FGDP-30 boasts ultra-sensitive pads
Resonating drum head of the Powerstroke type with the Yamaha logo. | Type: Resonant | Series: Powerstroke | Original Colour by Producer: White | Offer Configuration: Standard offer | Made in: USA | Suitable for: Bass Drum | Colour: White | Diameter (inch): 20.0 | Number of Layers: 1 | Diameter: 20' | Variant: New
Resonating drum head of the Powerstroke type with the Yamaha logo. | Made in: USA | Series: Powerstroke | Offer Configuration: Standard offer | Original Colour by Producer: White | Type: Resonant | Finish: Clear Drumhead | Variant: New Logo | Diameter (inch): 24.0 | Diameter: 24' | Suitable for: Bass Drum | Number of
Resonating drum head of the Powerstroke type with the Yamaha logo. | Made in: USA | Series: Powerstroke | Offer Configuration: Standard offer | Type: Resonant | Colour: Black | Variant: New Logo | Suitable for: Bass Drum | Original Colour by Producer: Black | Number of Layers: 1 | Finish: Clear Drumhead | Diameter
Professional snare drum trigger from DT50 series that can be attached to acoustic drums and provides accurate triggering while maintaining the natural feel and sustain of the drums and facilitating complete isolation between head and rim for dual-zone triggering. It is made from a solid die-cast