Yamaha HXOCII Drum Rack

Yamaha HXOCII Drum Rack

The open clamp is used to attach tubes having different thickness (diameter 15-34mm, including hexagonal tubes) to the hexagonal tube. Although fine angle adjustment is possible with the gear joint, more stable setting can be achieved by limiting the movement only to the vertical

Yamaha RCL500 Rack Clamp Drum Rack

Clamp for tom holder/cymbal attachment with an adapter. With the adapter: 16 mm, without the adapter: 22.2 mm. | Made in: China | Material: Steel

Yamaha HXTCII Drum Rack

This clamp attaches a tom clamp (CL945B, etc.) or cymbal holder (CH755, etc.) to the hex-shaped pipe and is compatible with 22.2mm diameter pipes. Its vertical angle is freely adjustable. | Material: Steel | Compatible with: Hex Rack | Made in: China

Yamaha HXREXII Drum Rack

The HXREXII creates a three-leg rack when combined with the HXR2LII. | Compatible with: Hex Rack;HXR2LII | Made in: China | Maximum Height: 580 mm | Package Contents: Tom Clamp;Tube Clamp;Side Bar;T-Leg | Material: Steel

Yamaha HXCCII Drum Rack

The cross clamp is used to connect two hexagonal tubes at 90-degree angles (for example, to connect a leg tube with a tube that has been horizontally set). | Material: Steel | Made in: China | Compatible with: Hex Rack

Yamaha HXACII Drum Rack

Several clamps for securing tubes of different thickness (15 –34 mm, including hexagonal tubes) are connected to the extended arm. These clamps can be used to secure tubes positioned far from each other. Each clamp has a gear joint, enabling fine angle adjustment. | Made in: China | Compatible with:

Yamaha HXTL30II Drum Rack

T-shaped leg for HexRackII (clamp and pipes are made from aluminium). Vertical pipe length: 30' (approx. 76cm). | Package Contents: T-Leg | Material: Steel | Compatible with: Hex Rack | Maximum Height: 762 mm | Made in: China

Yamaha HXTL23II Drum Rack

T-shaped leg for HexRackII (clamp and pipes are made from aluminium). Vertical pipe length: 23' (approx. 58cm). | Made in: China | Maximum Height: 580 mm | Compatible with: Hex Rack | Package Contents: T-Leg | Material: Steel

Pearl PCL-100 Drum Rack Pipe Clamp Drum Rack

Pearl PC-8 Rack Clamp Drum Rack

Gibraltar SC-GCRA CH Drum Rack

The Chrome Right Angle Drum Rack Clamp is designed to create joints between vertical drum rack supports and any straight or curved horizontal drum rack bar. | Made in: Taiwan | Material: Chrome

DW DWSMRKC15V Rack Clamp Drum Rack

9000 series rack clamp for accessories. Diameter: 1,5''. Finish: Chrome | Made in: Taiwan

DW DWSMRKC15VA Rack Clamp Drum Rack

9000 series rack clamp for accessories. Diameter: 1,5''. Finish: Chrome | Made in: Taiwan

Pearl PCX-200 Rack Clamp Drum Rack

Multi-purpose die-cast rack clamp with swivel arm that was designed for use with Pearl ICON racks. It features a square design that provides extra stability and improved clamping system that allows for precise positioning for any cymbal holder or tom arm. It also features an adjustable jaw. | Made

DW DWSMRKC15A Rack Clamp Drum Rack

9000 series rack clamp with angle adjustment. Diameter: 1,5''. Finish: Chrome | Made in: Taiwan

Yamaha MAT1

Attachment clamp for the Yamaha DTX-MULTI 12, DTX900, DTX700 and DTXtreme III drum trigger modules. Black colour. | Made in: China

Meinl CR-CLAMP2 Drum Rack

Clamp and rod mounts on the Meinl Cajon Rack for added instruments or accessories. Version with straight rod. Use to position mountable tambourines, blocks, or other percussion instruments on the rack. | Made in: Taiwan

DW DWSMRKC15S Rack Clamp Drum Rack

9000 series rack Angled Stacker. Diameter: 1,5'' - 1,5''. Finish: Chrome | Made in: Taiwan

Yamaha CL945B Tom-Tom Holder

Tom ball clamp for Yamaha YESS (Yamaha Enhanced Sustain System) drum mounting hardware. This hardware uses a rod clamp system that does not require putting a hole in the drum shell, so it does not influence the tonal output. This clamp features a ball and short rod for YESS short pipe and its

DW DWSMRKC15T Rack Clamp Drum Rack

9000 series rack T-Leg clamp for mounting a 90° foot on a bar. Diameter: 1,5'' - 1,5''. Finish: Chrome | Made in: Taiwan

DW DWSMRKC15AS Rack Clamp Drum Rack

9000 series rack Angled Stacker. Diameter: 1,5'' - 1,5''. Finish: Chrome | Material: Steel | Made in: Taiwan

Yamaha DS550U Drum Throne

Light-weight single-braced drum throne with round seat and clamp rod type of height adjustment. Throne is equipped with aluminium die-cast seat mount and 2” thick padded cushion for great comfort and its foldable design makes it easier to transport. Adjustable height: 406-560 mm, seat diameter:

Pearl PCR-50R Drum Rack

The Icon Rotating Pipe Extension Clamp allows a solid connection between two round rack bars, and connects them together with solid stability. Featuring two round pipe clamps that fit securely on any 1.5' round rack bar, both are allowed full 360-degree rotation with a center bar to keep them

Pearl PCX-300 Drum Rack

Pearl's Extended Rotating Rail Accessory Clamp's chrome extension arm and rotating mounting clamps let you take your set-up to new heights.Both the rail and accessory mount's geared, locking tilters lift standard drum and cymbal holders up to 6' from the main mounting rail; offering not only