Clamps For336

Filter
from the most popular
Wichard 2472 Snap Shackle AISI630
£ 63,50

Wichard 2472 Snap Shackle AISI630

Stainless steel shackle with fixed eye. Diameter 21 mm, length 70 mm, load capacity 3000 kg. | Made in: France | Length: 70 mm | Diameter (mm): 21.0 | Diameter: 21 mm
Wichard 2673 Snap Shackle AISI630
£ 64,60

Wichard 2673 Snap Shackle AISI630

Stainless steel shackle with swivel eye. Diameter 14 mm, length 70 mm, load capacity 1500 kg. | | Made in: France | Length: 70 mm | Diameter (mm): 16.0 | Diameter: 16 mm
Konig & Meyer 23720 Desk Microphone Stand
£ 21,10

Konig & Meyer 23720 Desk Microphone Stand

The new table clamp with a 3/8'' threaded connector is a true all-rounder. The threaded bolt can be fixed in four different directions using the universal spanner included. The clamp can also be extended using additional or other threaded bolts (1/4'', 3/8'', 5/8''). Having a clamping range of 0 to
GEWA 805182
£ 23,70

GEWA 805182

Rims BSX for toms. Compatibile with 12 'Tom-Tom. For 6-hole clamping screws. Free floating rubberized Tom Tom suspension. For almost all commercially available tom toms. Offers open sound and improved Tom Tom sustain. The BSX brand offers a wide range of stands and tripods at a fair price. Finish:
Yamaha DFP9500C Double Pedal
£ 431,00

Yamaha DFP9500C Double Pedal

with Floorboard, Chain Drive, Base Frame Tie Rods, Beater Angle Adjustment, Simple Hoop Clamp Mechanism, Beater Shaft Locker, Spring Roller with Builtin Bearings, Double Foot PedalChain Drive and convertible to the Belt Drive, Spring Tension Adjustment with Self Lock, 2 Way Beater, Convertible to
Beyerdynamic TG V50 Vocal Dynamic Microphone
£ 90,00

Beyerdynamic TG V50 Vocal Dynamic Microphone

diameter 23/35mm, included clamp, cardioid, 600 Ohms, 5017.000 Hz, dynamic vocal and speach microphone, dimensions: length 167mm, weight 270g, head diameter 54mm, replacement of the TGX 48/58 | Made in: Austria | Type: Dynamic | Offer Configuration: Standard offer | Switch: No | Weight: 390 g | Impedance: 600
Gibraltar SC-CLBAC Cymbal Arm
£ 60,40

Gibraltar SC-CLBAC Cymbal Arm

Save space and minimize clutter in your set up. The long cymbal boom arm with attachment clamp can mount to any existing cymbal or tom stand. Mount crash and splash cymbals efficiently anywhere on your kit. | Made in: Taiwan
Schaller Tremolo Locking Nut RIGHT R3 Gold
£ 50,50

Schaller Tremolo Locking Nut RIGHT R3 Gold

1 Tremolo locking nut complete with mounting screws from top and rear and nut clamping blocks.Matching locking nuts for Schaller tremolos.The strings sit just as firmly, but there are no sharp edges that could potentially cause string breakage.Suitable for all common string gauges.Radius is
SRAM DH Silicone Locking Grips Red Grips
£ 29,10

SRAM DH Silicone Locking Grips Red Grips

Silicone locking grips with double clamps and end plugs. | Original Colour by Producer: Red | Material: Silicone | Made in: Taiwan | Colour: Red | Length (mm): 139.0 | Package Quantity (pcs): 2
Pearl PCR-50R Drum Rack
£ 101,00

Pearl PCR-50R Drum Rack

The Icon Rotating Pipe Extension Clamp allows a solid connection between two round rack bars, and connects them together with solid stability. Featuring two round pipe clamps that fit securely on any 1.5' round rack bar, both are allowed full 360-degree rotation with a center bar to keep them
AcoustaGrip Concert Master 3/4
£ 23,00

AcoustaGrip Concert Master 3/4

Shoulder rest for 3/4-sized or full-sized violin or viola that has no-clamps that mute the violin's sound or stop the vibrations of wood. It increases the volume of sound, adds better quality with more 'overtones', and is very comfortable, ergonomically designed and will not fall off. It provides a
Besto Jackstay25mm With 2 Eyes 8 m
£ 18,70

Besto Jackstay25mm With 2 Eyes 8 m

Two-sided clamping lane on the ends. Load capacity - 2000 kg, length - 8 m, width - 25 mm. | Made in: Hungary
Besto Jackstay25mm With 2 Eyes 8 m
£ 18,70

Besto Jackstay25mm With 2 Eyes 8 m

Two-sided clamping lane on the ends. Load capacity - 2000 kg, length - 8 m, width - 25 mm. | Made in: Hungary
Dixon PCB-DKS Hardware Bag
£ 33,20

Dixon PCB-DKS Hardware Bag

Soft cover for drumming hardware such as cymbal stands, rhythm stands, various clamp stands, etc. The case is made of durable water-resist material with quality zippers and a handy handle for easy carrying. | Length (mm): 940.0 | Type: Bag | Height (mm): 160.0 | Width (mm): 160.0 | Compartments: 1 | Colour:
Shimano ST-EF500-2LSBL 3 Clamp Band Shifter
£ 14,70

Shimano ST-EF500-2LSBL 3 Clamp Band Shifter

Shift/Brake Lever | 2-finger lever size  | 3 x Front Speeds | combine Reach Adjust, EZ FIRE Plus shifting, an OPTICAL GEAR DISPLAY in a durable assembly | Type of Product: Dual Control Lever | Mounting System: Clamp Band | Chain Gearing: 3 | Made in: Malaysia | Usage Bikesport: Trekking
Tama MC69 Tom-Tom Holder
£ 53,00

Tama MC69 Tom-Tom Holder

Single Tom attachment clamp. It can be mounted on stands with 15.1 - 28.6 mm diameter base section tubing. It has compact design and Omni-ball patented angle adjustment. Colour: Chrome. | Material: Steel | Made in: China
e*thirteen Base Black 35 mm 800.0 Handlebar
£ 36,40

e*thirteen Base Black 35 mm 800.0 Handlebar

The Base Handlebar uses custom engineered butting and bend profiles, 800 mm width, and 35 mm clamp for ideal ride characteristics. 9 degrees of backsweep is easier on the wrists than most traditional bends of handlebar, and 5 degrees of upsweep offers comfort at all angles. | | Custom engineered
Shimano Acera FD-M3000-TS6 3-9 Clamp Band Front Derailleur
£ 23,10

Shimano Acera FD-M3000-TS6 3-9 Clamp Band Front Derailleur

A compact link design increases 29er tire clearance while stainless steel adjustment bolts help avoid corrosion on the SHIMANO ACERA 3 x 9 speed front derailleur. | Chain Gearing: 3;9 | Mounting System: Clamp Band | Usage Bikesport: MTB;Trekking | Made in: Indonesia
Konig & Meyer 240/1 Accessory for microphone stand
£ 31,70

Konig & Meyer 240/1 Accessory for microphone stand

Attaches to stands with diameter from 15 to 22 mm. With prismatic clamp connector. Comes complete with adjustable and swiveling boom arm with 5/8 '' thread. Height: 34 cm. Arm length: 60,5 cm. Weight: 0,93 kg. Colour: Black. | Made in: China | Colour: Black
Konig & Meyer 24150 Wall mount for speakerboxes
£ 71,90

Konig & Meyer 24150 Wall mount for speakerboxes

Speaker mount. Features: The tube clamp is suitable for diameters from 45 - 55 mm. Suitable for loudspeakers with 36 mm flange adapters. Max load is 50 kg. Variable swivel up to 240°. There are 3 settings for the loudspeaker distance. Colour: Black. | Made in: Germany
Floyd Rose FL-FR-NCB-C Chrome
£ 18,50

Floyd Rose FL-FR-NCB-C Chrome

Genuine replacement nut clamping block for Floyd Rose Titanium Tremolo System. Made in USA (set of 3). Colour: Chrome. | Made in: China | Colour: Chrome
Floyd Rose FL-FR-NCB-G Gold
£ 21,70

Floyd Rose FL-FR-NCB-G Gold

Genuine replacement nut clamping block for Floyd Rose Titanium Tremolo System. Made in USA (set of 3). Colour: Gold. | Colour: Gold | Made in: China
Wichard 2471 Snap Shackle AISI630
£ 42,80

Wichard 2471 Snap Shackle AISI630

Stainless steel shackle with fixed eye. Diameter 16 mm, length 50 mm, load capacity 2000 kg. | Length: 50 mm | Made in: France | Diameter: 16 mm | Diameter (mm): 16.0
PDP by DW 804615 Hi-Hat Stand
£ 85,00

PDP by DW 804615 Hi-Hat Stand

Long closed hi-hat boom arm with an MG3 tube to boom arm clamp. The PDAX9212 allows you to mount a secondary / auxilliary hi-hat to your drum kit. The MG3 clamp allows you to attach this hi-hat mount to any cymbal or drum stand. Includes a Quick Grip clamp with infinite angle adjustment, a bottom
Gibraltar SC-DSDH Soft Drink Holder
£ 38,60

Gibraltar SC-DSDH Soft Drink Holder

Deluxe black web soft drink holder with mount. Clamps to any stand. Fits 1 liter bottles and most drink containers. | Made in: Taiwan
Meinl TBR06ABS-BK Samba Instrument
£ 31,70

Meinl TBR06ABS-BK Samba Instrument

Floatune Tambourine. Diameter: 6' (15,24 cm). Dimensions: 15 x 4 cm. Depth: 4,0 cm. Number of Clamp Screws: 8. Material: ABS thermoplastic. Skin type: Mesh Head. Colour / Finish: Black. Special Features: Floatune Tuning System | Made in: Thailand | Colour: Black | Original Colour by Producer: Black
Meinl TBR06ALU Samba Instrument
£ 52,60

Meinl TBR06ALU Samba Instrument

Floatune Tambourine. Diameter: 6' (15,24 cm). 15 x 4 cm. Depth: 4,0 cm. Number of Clamp Screws: 8. Material: Aluminium. Skin type: Artificial plastic skin. Colour / Finish: Chrome finish. Special Features: Floatune Tuning System | Material: Aluminium | Made in: Thailand
Gibraltar SC-GCRMC Drum Rack
£ 35,00

Gibraltar SC-GCRMC Drum Rack

Multi clamp from Chrome series that mounts 15.9mm to 31.75mm diameter accessory arms to 38.1mm diameter rack bar. | Made in: Taiwan
Konig & Meyer 19724 iPad Air Holder Black
£ 37,30

Konig & Meyer 19724 iPad Air Holder Black

Holder for iPad Air that features a strong prismatic element with ergonomic clamping screw which allows for quick and easy attachment to any tubes of up to 30 mm diameter. It holds the device securely and comfortably and allows the user the iPad Air position of their choice. The swivel movement can
SRAM SX Eagle Trigger Shifter Right 12 Clamp Band Shifter
£ 32,50

SRAM SX Eagle Trigger Shifter Right 12 Clamp Band Shifter

NX Eagle trigger shifter for easy, intuitive shifting every time for every rider. | | Speeds: 12 | Compat - derailleur / hub: 12s | Cable pull ratio : X-actuation | Cable length: 2 200 mm | | Variant: Right | Made in: Taiwan | Type of Product: Shift Lever | Chain Gearing: 12 | Colour: Black | Mounting System: Clamp
Pearl IS-1216SL/C
£ 60,30

Pearl IS-1216SL/C

​Pearl's Integrated Suspension System (ISS) Mounts clamp directly to each drum's hoop to provide the quickest, easiest mounting system available (US PAT: 5544561). The IS-1216SL/C model support 2mm hoops and boast a beefier BT3 bracket. | Material: Steel | Made in: China
R2 Wheelie Helmet Petrol Blue/Neon Orange S Kid Bike Helmet
£ 33,10

R2 Wheelie Helmet Petrol Blue/Neon Orange S Kid Bike Helmet

WHEELIE comes with a new and higher quality clamping system and this model helmet is manufactured by the INMOLD safety technology, following the model of the adult helmet. Its shape and mainly stretched occiput provides increased safety in the field. The shape of the helmet is highly versatile and
Wichard Key Pin Shackle with Bar o 6 mm
£ 19,20

Wichard Key Pin Shackle with Bar o 6 mm

D' - Shackle with locking pin Stainless Steel. Diameter 6 mm, length 45 mm, load capacity 1700 kg. | | Diameter: 6 mm | Made in: France | Diameter (mm): 6.0 | Length: 45 mm
PRO LT MTB Black 31,8 mm 720.0 Handlebar
£ 35,50

PRO LT MTB Black 31,8 mm 720.0 Handlebar

The riser bar are made of aluminium 6061. Freeride and AMRise: 20 mmStem Clamp: 31,8 mmWidth: 720 mmBacksweep: 9 ° Upsweep: 4 ° | Diameter: 31,8 mm | Original Colour by Producer: Black | Weight (g): 330.0 | Material: Aluminium | Width (mm): 720.0 | Usage Bikesport: MTB | Made in: China
Konig & Meyer 23723 Desk Microphone Stand
£ 22,60

Konig & Meyer 23723 Desk Microphone Stand

The new table clamp with a 3/8' threaded connector is a true all-rounder. The threaded bolt can be fixed in four different directions using the universal spanner included. The clamp can also be extended using additional or other threaded bolts (1/4', 3/8“, 5/8“). Having a clamping range of 10
DW SM9212 X-Hat Hi-Hat Stand
£ 141,00

DW SM9212 X-Hat Hi-Hat Stand

9000 Series Closed HiHat. Features: Hi-Hat clutch with securing screw - With multi clamp to fit on a stand - Infinitely adjustable tilter - incl. SMMG3 Mega Clamp. Finish: Chrome | Material: Steel | Made in: Taiwan
DW DWSMRKC15AS Rack Clamp Drum Rack
£ 114,00

DW DWSMRKC15AS Rack Clamp Drum Rack

9000 series rack Angled Stacker. Diameter: 1,5'' - 1,5''. Finish: Chrome | Material: Steel | Made in: Taiwan
Wichard Key Pin Shackle with Bar o 5 mm
£ 18,20

Wichard Key Pin Shackle with Bar o 5 mm

D' - Shackle with locking pin Stainless Steel. Diameter 5 mm, length 37 mm, load capacity 1200 kg. | | Diameter: 5 mm | Diameter (mm): 5.0 | Length: 37 mm | Made in: France
Wichard Key Pin Shackle with Bar o 8 mm
£ 29,60

Wichard Key Pin Shackle with Bar o 8 mm

D' - Shackle with locking pin Stainless Steel. Diameter 8 mm, length 59 mm, load capacity 2500 kg. | | Diameter: 8 mm | Length: 59 mm | Made in: France | Diameter (mm): 8.0
Tama MXA53 Closed Hi-Hat Attachment Hi-Hat Stand
£ 77,80

Tama MXA53 Closed Hi-Hat Attachment Hi-Hat Stand

Closed hi-hat attachment clamp that is simple designed to allow for two different settings by just engaging a lever. It is attachable to stand from 19.1 to 28.6 mm in diameter and great for double bass or double pedal players. The hi-hat cymbals can be also set as half-open using the spring. | Made
Truvativ Descendant Stem 50.0 0° Stem
£ 45,30

Truvativ Descendant Stem 50.0 0° Stem

The Descendant stem with 0° rise, clamp diameter 35.0 mm and steerer diameter 1-1/8''. | Diameter (mm): 35.0 | Colour: Black | Rise: 0° | Length (mm): 50.0 | Material: Aluminium | Made in: Taiwan
Konig & Meyer 26777 Studio Monitors Stand
£ 75,50

Konig & Meyer 26777 Studio Monitors Stand

Height-adjustable monitor stand with table clamp for near-field monitors. The solid metal construction with the large support plate (205 x 245 mm) is suitable for a wide range of monitors and other equipment in the same size range. A practical table clamp allows it to be attached to tabletops with
Konig & Meyer 26778 Studio Monitors Stand
£ 74,30

Konig & Meyer 26778 Studio Monitors Stand

Height-adjustable monitor stand with table clamp for near-field monitors. The solid metal construction with the large support plate (230 x 250 mm) is suitable for a wide range of monitors and other equipment in this size range. The plate can be tilted continuously up to 12.5° and moved to optimise
Wichard D - Shackle Stainless Steel with Inside Hexagon Pin 10 mm
£ 21,50

Wichard D - Shackle Stainless Steel with Inside Hexagon Pin 10 mm

D' - Shackle Stainless Steel with Inside Hexagon. Diameter 10 mm, length 33 mm, load capacity 4300 kg. | Length: 33 mm | Made in: France | Diameter (mm): 10.0 | Diameter: 10 mm
Gator Frameworks GFWSPKSTMNDSKCMP Studio Monitors Stand
£ 79,20

Gator Frameworks GFWSPKSTMNDSKCMP Studio Monitors Stand

Frameworks Clamp-On Studio Monitor Stand - Adjustable HeightDetails:Pair of (2) Desktop Studio Monitor Clamp-On Stands12”/305mm x 9”/229mm Speaker Platform with Soft, EVA-Lined SurfaceFits Most Small-Sized Studio Monitor Speakers both Vertically and HorizontallyMultipurpose Top Deck Surface
Wichard Key Pin Shackle o 8 mm
£ 27,70

Wichard Key Pin Shackle o 8 mm

D' - Shackle with locking pin Stainless Steel. Diameter 8 mm, length 59 mm, load capacity 3500 kg. | | Made in: France | Diameter (mm): 8.0 | Length: 59 mm | Diameter: 8 mm
Meinl MXH Hi-Hat Stand
£ 61,60

Meinl MXH Hi-Hat Stand

Auxiliary Hi-hat Arm with clamp. Alows you to place your Hi-Hat anywhere on your set and adjust its position with the clamp and boom arm. The tension adjustment lets you finely adjust the pressure on the cymbals. | Material: Steel | Made in: Taiwan
AUDIX DP5-A Microphone Set for Drums
£ 727,00

AUDIX DP5-A Microphone Set for Drums

2x D2 tom tom mic, 1x D4 floor tom mic and 1x D6 bass mic, 4x d-vice mic clamps with gooseneck.Supplied with a High Quality Carry case | Made in: China | Package Contents: Holder;D4;D2;D6;I5;Suitcase | Number of Microphones: 5
Mermade Double Waver Pink curling iron 1 pc
£ 65,30

Mermade Double Waver Pink curling iron 1 pc

Mermade Double Waver Pink, 1 pc, Hair Curlers for Women, Characteristics: clamp tong ionic function option to regulate temperature heats up quickly shuts off automatically after a period of inactivity How to use: Follow the instructions for use included
Ruka 37516 Stand for Wind Instrument
£ 22,60

Ruka 37516 Stand for Wind Instrument

Clarinet lyre, 1 push-button with strong spring, with easy-adjust clamp, 150 x 85 mm, 85 g | Type: Clarinet | Weight: 85 g | Made in: Taiwan | Colour: Silver | Material: Steel | Original Colour by Producer: Silver
Ruka 37501 Stand for Wind Instrument
£ 24,00

Ruka 37501 Stand for Wind Instrument

Trumpet lyre, 1 push-button with strong spring, with clamp to screw on mouth pipe, 140 x 85 mm, 78 g | Made in: Taiwan | Type: Trumpet | Original Colour by Producer: Silver | Colour: Silver | Material: Steel | Weight: 78 g
PDP by DW 804615 Hi-Hat Stand
£ 85,00

PDP by DW 804615 Hi-Hat Stand

Long closed hi-hat boom arm with an MG3 tube to boom arm clamp. The PDAX9212 allows you to mount a secondary / auxilliary hi-hat to your drum kit. The MG3 clamp allows you to attach this hi-hat mount to any cymbal or drum stand. Includes a Quick Grip clamp with infinite angle adjustment, a bottom
e*thirteen Race Black 35 mm 800.0 Handlebar
£ 114,00

e*thirteen Race Black 35 mm 800.0 Handlebar

Race Carbon Handlebar uses an engineered carbon layup, 800 mm wide, and 35 mm clamp for ideal ride characteristics. 9 degrees of backsweep is easier on the wrists than most traditional bends of handlebar, and 5 degrees of upsweep offers comfort at all angles. | | Engineered layup for optimal strength
Ruka 37500 Stand for Wind Instrument
£ 21,60

Ruka 37500 Stand for Wind Instrument

Trumpet lyre, 1 push-button with strong spring, with clamp to screw on mouth pipe, 140 x 85 mm, 78 g | Original Colour by Producer: Gold | Weight: 78 g | Material: Steel | Colour: Gold | Made in: Taiwan | Type: Trumpet
Ruka 37515 Stand for Wind Instrument
£ 24,30

Ruka 37515 Stand for Wind Instrument

Clarinet lyre, 1 push-button with strong spring, with easy-adjust clamp, 150 x 85 mm, 85 g | Original Colour by Producer: Gold | Weight: 85 g | Type: Clarinet | Made in: Taiwan | Material: Steel | Colour: Gold
Beyerdynamic TG D35 TRIPLE SET Microphone Set for Drums
£ 243,00

Beyerdynamic TG D35 TRIPLE SET Microphone Set for Drums

The TG D35 Triple Set consists of 3x TG D35, 3x Microphone Clamp MKV 87 and 3x Zipperbag. The TG D35 is a professional dynamic microphone with supercardioid polar pattern for miking drums, percussion and other instruments. The tuned frequency response is predestined for toms and snare, but due to
Wichard D - Shackle Stainless Steel with Inside Hexagon Pin 12 mm
£ 34,30

Wichard D - Shackle Stainless Steel with Inside Hexagon Pin 12 mm

D' - Shackle Stainless Steel with Inside Hexagon. Diameter 12 mm, length 39 mm, load capacity 5500 kg. | Diameter: 12 mm | Diameter (mm): 12.0 | Length: 39 mm | Made in: France
Sailor Tite-Lok 5618/1
£ 69,30

Sailor Tite-Lok 5618/1

Featuring a large | C-clamp that mounts to any edge up to 50,8 mm thick, this aluminum Tite-Lok | Rod Holder rotates to 12 locking positions and adjusts to any desired | fishing rod angle. Suitable for both heavy and light duty fishing | applications, the durable Rod Holder's unique open style design
Ram Mounts Motorcycle Brake/Clutch Reservoir Double Ball Base
£ 32,80

Ram Mounts Motorcycle Brake/Clutch Reservoir Double Ball Base

RAM® Motorcycle Double Ball Base connects to your handlebar clutch/brake clamp, left or right side, and holds two 2,54 cm diameter mounting ball. The ball that is connected between the hole centers is removable. The base fits the control clamps on your motorcycle with 40 mm x 6 mm stainless steel
Meinl PA12CN-M Samba Instrument
£ 118,00

Meinl PA12CN-M Samba Instrument

Pandeiro. Diameter: 12' (30,48 cm). Dimensions: 30,0 x 4,5 cm. Depth: 4 cm. Number of Clamp Screws: 18. Material: Wood. Skin type: Goat skin. Colour / Finish: Natural. Special Features: with jingles | Material: Rubber Wood | Made in: Thailand
R2 Wheelie Helmet Petrol Blue/Neon Orange M Kid Bike Helmet
£ 33,10

R2 Wheelie Helmet Petrol Blue/Neon Orange M Kid Bike Helmet

WHEELIE comes with a new and higher quality clamping system and this model helmet is manufactured by the INMOLD safety technology, following the model of the adult helmet. Its shape and mainly stretched occiput provides increased safety in the field. The shape of the helmet is highly versatile and
Lizard Skins MacAskill Single Clamp Lock-On Teal/Black 29.5 Grips
£ 27,20

Lizard Skins MacAskill Single Clamp Lock-On Teal/Black 29.5 Grips

The MacAskill Signature grip is designed and ridden by Danny MacAskill. With a larger diameter in key areas of the grip to provide better cushioning for impacts and vibration dampening.Compatible with MTB, BMX, ATV, PWC | Usage Bikesport: PWC;BMX;ATV;MTB | Made in: USA | Original Colour by Producer:
Lizard Skins MacAskill Single Clamp Lock-On Deja Blue/Black 29.5 Grips
£ 24,20

Lizard Skins MacAskill Single Clamp Lock-On Deja Blue/Black 29.5 Grips

The MacAskill Signature grip is designed and ridden by Danny MacAskill. With a larger diameter in key areas of the grip to provide better cushioning for impacts and vibration dampening. Compatible with MTB, BMX, ATV, PWC | Usage Bikesport: ATV;BMX;MTB;PWC | Colour: Blue | Thickness (mm): 29.5 | Weight
Osculati Snap-hook with screw opening Stainless Steel 6 mm
£ 116,00

Osculati Snap-hook with screw opening Stainless Steel 6 mm

Snap-hook w. screw opening Stainless Steel. Diameter 6 mm, lenght 45 mm. | Diameter (mm): 6.0 | Diameter: 6 mm | Length: 45 mm | Made in: China
Wichard Key Pin Shackle with Screw-bar and HR pin o 6 mm
£ 29,90

Wichard Key Pin Shackle with Screw-bar and HR pin o 6 mm

Key Pin Shackle with Screw-bar and HR pin. Diameter 6 mm, length 45 mm, load capacity 2200 kg. | | Diameter: 6 mm | Diameter (mm): 6.0 | Made in: France | Length: 45 mm
Wichard Key Pin Shackle with Screw-bar and HR pin o 8 mm
£ 56,00

Wichard Key Pin Shackle with Screw-bar and HR pin o 8 mm

Key Pin Shackle with Screw-bar and HR pin. Diameter 8 mm, length 59 mm, load capacity 3600 kg. | | Diameter (mm): 8.0 | Made in: France | Diameter: 8 mm | Length: 59 mm
Lizard Skins MacAskill Single Clamp Lock-On Jet Black/Black 29.5 Grips
£ 30,60

Lizard Skins MacAskill Single Clamp Lock-On Jet Black/Black 29.5 Grips

The MacAskill Signature grip is designed and ridden by Danny MacAskill. With a larger diameter in key areas of the grip to provide better cushioning for impacts and vibration dampening. Compatible with MTB, BMX, ATV, PWC | Usage Bikesport: PWC;BMX;ATV;MTB | Made in: USA | Length (mm): 136.0 | Type of
Zipp Service Course Stem 100.0 6° Stem
£ 45,40

Zipp Service Course Stem 100.0 6° Stem

Service Course stem. | | Stem angle / rise: 6° | Length: 100 mm | Clamp diam: 31.8 mm | Steerer clamp diameter: 1-1/8'' | | Made in: Taiwan | Length (mm): 100.0 | Material: Aluminium | Diameter (mm): 31.8 | Colour: Black | Weight (g): 152.0 | Rise: 6°
Zipp Service Course Stem 110.0 6° Stem
£ 45,40

Zipp Service Course Stem 110.0 6° Stem

Service Course stem. | | Stem angle / rise: 6° | Length: 110 mm | Clamp diam: 31.8 mm | Steerer clamp diameter: 1-1/8'' | | Colour: Black | Material: Aluminium | Rise: 6° | Weight (g): 152.0 | Diameter (mm): 31.8 | Length (mm): 110.0 | Made in: Taiwan
Zipp Service Course Stem 120.0 6° Stem
£ 45,40

Zipp Service Course Stem 120.0 6° Stem

Service Course stem. | | Stem angle / rise: 6° | Length: 120 mm | Clamp diam: 31.8 mm | Steerer clamp diameter: 1-1/8'' | | Made in: Taiwan | Rise: 6° | Diameter (mm): 31.8 | Colour: Black | Length (mm): 120.0 | Material: Aluminium | Weight (g): 152.0
Zipp Service Course 70 Ergo Handlebar 31,8 mm 420.0 Handlebar
£ 50,00

Zipp Service Course 70 Ergo Handlebar 31,8 mm 420.0 Handlebar

Handlebar Service Course. | | Clamp diam: 31.8 mm | Ramp angle: 10° | Outsweep: 4° | Backsweep: 3° | Flattened top shape | Clamp width: 90 mm | | Weight (g): 295.0 | Width (mm): 420.0 | Diameter: 31,8 mm | Material: Aluminium | Usage Bikesport: Road | Made in: Taiwan
Osculati Swiveling 180° Capote Junction
£ 22,90

Osculati Swiveling 180° Capote Junction

AISI 316 Stainless Steel Folding Clamp - Salt Water Resistant. Dimensions: length - 70 mm, width - 25 mm, height - 45 mm. | Made in: China | Material: Stainless Steel | Length: 70 mm
Zipp Service Course 70 Ergo Handlebar 31,8 mm 400.0 Handlebar
£ 49,80

Zipp Service Course 70 Ergo Handlebar 31,8 mm 400.0 Handlebar

Handlebar Service Course. | | Clamp diam: 31.8 mm | Ramp angle: 10° | Outsweep: 4° | Backsweep: 3° | Flattened top shape | Clamp width: 90 mm | | Made in: Taiwan | Usage Bikesport: Road | Width (mm): 400.0 | Material: Aluminium | Diameter: 31,8 mm | Weight (g): 295.0
Wichard Key Pin Shackle with Screw-bar and HR pin o 5 mm
£ 28,30

Wichard Key Pin Shackle with Screw-bar and HR pin o 5 mm

Key Pin Shackle with Screw-bar and HR pin. Diameter 5 mm, length 37 mm, load capacity 1500 kg. | | Length: 37 mm | Diameter: 5 mm | Diameter (mm): 5.0 | Made in: France
Lizard Skins MacAskill Single Clamp Lock-On Graphite/Black 29.5 Grips
£ 25,30

Lizard Skins MacAskill Single Clamp Lock-On Graphite/Black 29.5 Grips

The MacAskill Signature grip is designed and ridden by Danny MacAskill. With a larger diameter in key areas of the grip to provide better cushioning for impacts and vibration dampening. Compatible with MTB, BMX, ATV, PWC | Colour: Grey;Black | Usage Bikesport: PWC;ATV;MTB;BMX | Made in: USA | Weight (g):
Osculati Bimini Sliding Bracket F. Tubes 25 mm
£ 19,70

Osculati Bimini Sliding Bracket F. Tubes 25 mm

Made of mirror polished AISI 316 stainless steel, fitted with cam quick clamping system. | Diameter: 25 mm | Made in: China | Material: Stainless Steel AISI316
Lizard Skins Machine Single Clamp Lock-On Gum/Black 31.0 Grips
£ 32,10

Lizard Skins Machine Single Clamp Lock-On Gum/Black 31.0 Grips

The Machine grip offers all-over traction for your hand. We incorporated a waffle pattern to manage finger placement on the bottom surface. Specific right and left grip design for optimum performance. Compatible with MTB, BMX, ATV and PWC | Thickness (mm): 31.0 | Original Colour by Producer:
Lizard Skins MacAskill Single Clamp Lock-On Ultra Purple/Black 29.5 Grips
£ 25,30

Lizard Skins MacAskill Single Clamp Lock-On Ultra Purple/Black 29.5 Grips

The MacAskill Signature grip is designed and ridden by Danny MacAskill. With a larger diameter in key areas of the grip to provide better cushioning for impacts and vibration dampening. Compatible with MTB, BMX, ATV, PWC | Thickness (mm): 29.5 | Weight (g): 101.0 | Material: DuraSoft Polymer | Colour:
Oakley Back Bone Beanie 2.0 Blackout UNI Ski Beanie
£ 19,10

Oakley Back Bone Beanie 2.0 Blackout UNI Ski Beanie

A ribbed knit, all-acrylic fabric and clamped Ellipse logo make this Backbone Beanie the ideal go-to for winter’s chill. Designed with built-in stretch, this beanie provides all-day comfort and warmth with style.FEATURES / TECHNOLOGYHYDROLIXStay cool, dry and comfortable with moisture absorption,
Ram Mounts Tab-Tite Universal Spring Loaded Holder for Large Tablets
£ 59,60

Ram Mounts Tab-Tite Universal Spring Loaded Holder for Large Tablets

Get the most out of your tablet with the RAM Tab-Titeuniversal clamping cradle. With 2 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet,
Lizard Skins Machine Single Clamp Lock-On Jet Black/Black 31.0 Grips
£ 35,00

Lizard Skins Machine Single Clamp Lock-On Jet Black/Black 31.0 Grips

The Machine grip offers all-over traction for your hand. We incorporated a waffle pattern to manage finger placement on the bottom surface. Specific right and left grip design for optimum performance. Compatible with MTB, BMX, ATV and PWC | Original Colour by Producer: Jet Black/Black | Colour:
Lizard Skins Charger Evo Single Clamp Lock-On Jet Black/Black 32.0 Grips
£ 32,50

Lizard Skins Charger Evo Single Clamp Lock-On Jet Black/Black 32.0 Grips

The Charger Evo is the most complex grip we've ever created. The dual pattern design offers comfort and maximum grip in every direction. When the trail gets aggressive, the rider can take charge. Compatible with MTB, BMX, ATV, and PWC | Length (mm): 136.0 | Usage Bikesport: BMX;MTB;ATV;PWC | Type of
Oakley Back Bone Beanie 2.0 New Dark Brush UNI Ski Beanie
£ 19,10

Oakley Back Bone Beanie 2.0 New Dark Brush UNI Ski Beanie

A ribbed knit, all-acrylic fabric and clamped Ellipse logo make this Backbone Beanie the ideal go-to for winter’s chill. Designed with built-in stretch, this beanie provides all-day comfort and warmth with style.FEATURES / TECHNOLOGYHYDROLIXStay cool, dry and comfortable with moisture absorption,
Lizard Skins Machine Single Clamp Lock-On Candy Red/Black 31.0 Grips
£ 24,30

Lizard Skins Machine Single Clamp Lock-On Candy Red/Black 31.0 Grips

The Machine grip offers all-over traction for your hand. We incorporated a waffle pattern to manage finger placement on the bottom surface. Specific right and left grip design for optimum performance. Compatible with MTB, BMX, ATV and PWC | Usage Bikesport : ATV | Material : DuraSoft Polymer | Weight
Lizard Skins Charger Evo Single Clamp Lock-On Graphite/Black 32.0 Grips
£ 25,80

Lizard Skins Charger Evo Single Clamp Lock-On Graphite/Black 32.0 Grips

The Charger Evo is the most complex grip we've ever created. The dual pattern design offers comfort and maximum grip in every direction. When the trail gets aggressive, the rider can take charge.Compatible with MTB, BMX, ATV, and PWC | Made in: USA | Usage Bikesport: PWC;ATV;BMX;MTB | Colour:
Konig & Meyer 19727 iPad Air 2 holder
£ 39,30

Konig & Meyer 19727 iPad Air 2 holder

Holder for iPad Air 2/iPad Pro 9.7 that features a strong prismatic element with ergonomic clamping screw which allows for quick and easy attachment to any tubes of up to 30 mm diameter. It holds the device securely and comfortably and allows the user the iPad Air/ iPad Pro 9.7 position of their
Lizard Skins Charger Evo Single Clamp Lock-On Orange/Black 32.0 Grips
£ 35,00

Lizard Skins Charger Evo Single Clamp Lock-On Orange/Black 32.0 Grips

The Charger Evo is the most complex grip we've ever created. The dual pattern design offers comfort and maximum grip in every direction. When the trail gets aggressive, the rider can take charge. Compatible with MTB, BMX, ATV, and PWC | Usage Bikesport: MTB;ATV;BMX;PWC | Weight (g): 90.0 | Thickness
Lizard Skins Machine Single Clamp Lock-On Olive Green/Black 31.0 Grips
£ 31,00

Lizard Skins Machine Single Clamp Lock-On Olive Green/Black 31.0 Grips

The Machine grip offers all-over traction for your hand. We incorporated a waffle pattern to manage finger placement on the bottom surface. Specific right and left grip design for optimum performance. Compatible with MTB, BMX, ATV and PWC | Made in: USA | Original Colour by Producer: Olive
Lizard Skins Machine Single Clamp Lock-On Orange/Black 31.0 Grips
£ 24,80

Lizard Skins Machine Single Clamp Lock-On Orange/Black 31.0 Grips

The Machine grip offers all-over traction for your hand. We incorporated a waffle pattern to manage finger placement on the bottom surface. Specific right and left grip design for optimum performance. Compatible with MTB, BMX, ATV and PWC | Type of Product: Grip | Length (mm): 135.0 | Usage Bikesport:
Etnies Icon Snapback Black/Black UNI Baseball Cap
£ 29,20

Etnies Icon Snapback Black/Black UNI Baseball Cap

Men's 5 panel snapback with flat brim. | | Soft buckram reinforcement | Embroidered crown | Etnies clamp logo | | Material: Cotton;Polyester | Season: Autumn;Spring;Summer;Winter | Made in: China | Colour: Black | Gender: Male | Material Specification: Cotton;Polyester | Original Colour by Producer: Black/Black | Age
Lizard Skins Charger Evo Single Clamp Lock-On Electric Blue/Black 32.0 Grips
£ 26,90

Lizard Skins Charger Evo Single Clamp Lock-On Electric Blue/Black 32.0 Grips

The Charger Evo is the most complex grip we've ever created. The dual pattern design offers comfort and maximum grip in every direction. When the trail gets aggressive, the rider can take charge. Compatible with MTB, BMX, ATV, and PWC | Usage Bikesport: PWC;ATV;MTB;BMX | Made in: USA | Material:
Lizard Skins Charger Evo Single Clamp Lock-On Fire Red/Black 32.0 Grips
£ 24,30

Lizard Skins Charger Evo Single Clamp Lock-On Fire Red/Black 32.0 Grips

The Charger Evo is the most complex grip we've ever created. The dual pattern design offers comfort and maximum grip in every direction. When the trail gets aggressive, the rider can take charge. Compatible with MTB, BMX, ATV, and PWC | Thickness (mm): 32.0 | Colour: Red;Black | Usage Bikesport:
Konig & Meyer 19743 Tablet PC holder
£ 56,40

Konig & Meyer 19743 Tablet PC holder

Universal tablet holder with a practical clamping mechanism for all tablets with an approx. size of 10' to 16'. The tablet mount is made of bio-based plastic. These plastics contain a proportion of over 50% up to 100% of renewable plant-based raw materials. The use of renewable raw materials helps
Zipp Service Course 70 Ergo Handlebar B4 44 cm 31,8 mm Blast Black/Brigh Silver 440.0 Handlebar
£ 49,90

Zipp Service Course 70 Ergo Handlebar B4 44 cm 31,8 mm Blast Black/Brigh Silver 440.0 Handlebar

Handlebar Service Course. | | Clamp diam: 31.8 mm | Ramp angle: 10° | Outsweep: 4° | Backsweep: 3° | Flattened top shape | Clamp width: 110 mm | | Width: 44 cm | Diameter: 31,8 mm | Material: Aluminium | Width (mm): 440.0 | Colour: Black | Weight (g): 295.0 | Original Colour by Producer: Blast Black/Brigh
Konig & Meyer 19744 Tablet PC stand holder
£ 34,60

Konig & Meyer 19744 Tablet PC stand holder

Universal tablet holder with a practical clamping mechanism for all tablets with an approx. size of 10' to 16'. The tablet mount is made of bio-based plastic. These plastics contain a proportion of over 50% up to 100% of renewable plant-based raw materials. The use of renewable raw materials helps
AcoustaGrip Soloist 4/4-3/4-1/2
£ 30,80

AcoustaGrip Soloist 4/4-3/4-1/2

The Acousta Grip series for adults fits for 4/4, 3/4 and partly 1/2 size violins. It has no clamps that dampen the sound of the instrument, on the contrary, it amplifies the sound and improves the quality of the top tones.Acousta Grip is very comfortable and convenient, ergonomically shaped and