Lowest price in the last 45 days: £ 82,10
Prices and availability may change several times a day. Check the current data directly in the e-shops. You can find all available colors and sizes directly in the e-shops.
Fully automatic bilge pump. Switch on when the water reaches a height of 60 mm, when the water is depleted, the pump automatically turns off. Unique sensor technology ensures that the pump only switches on when it is in contact with water, and the pump does not switch on when it comes to oil - it protects the environment. Possibility to control the pump even manually via cable. Power: 31 L/min. Hose diameter 19 mm. Supply voltage 12 V. Dimensions: 114 mm high, 152 mm x 83 mm. Packaged dimensions: 18,00 x 9,00 x 20,00 cm. Actual weight: 0.46 kg (approximately 0.66 kg packed). Made in: USA Voltage: 12 V
Product Rule Mate 500 Automatic - Bilge Pump #13550 is marked by the EAN code 9009412123018.
Category | Pumps, Switches |
EAN | 9009412123018 |
Fully automatic bilge pump. Switch on when the water reaches a height of 60 mm, when the water is depleted, the pump automatically turns off. Unique sensor technology ensures that the pump only switches on when it is in contact with water, and the pump does not switch on when it comes to oil - it
Fully automatic bilge pump. Switch on when the water reaches a height of | 60 mm, when the water is depleted, the pump automatically turns off. | Unique sensor technology ensures that the pump only switches on when it | is in contact with water, and the pump does not switch on when it comes | to oil -
Fully automatic bilge pump. Switch on when the water reaches a height of | 60 mm, when the water is depleted, the pump automatically turns off. | Unique sensor technology ensures that the pump only switches on when it | is in contact with water, and the pump does not switch on when it comes | to oil -
Automatic bilge pump is suitable for medium-big boats. The pump provides a special switch that check every 5 minutes the bilge water level. When the float rises, the pump begins to turn on. It will delay it's activation for two seconds, thus eliminating any false starts. When the float drops and
Rule Mate 800 Submersible is fully automated bilge compact pump for smaller vessels with integral sensor. Air Vents in the body to help prevent air locks in challenging installations. Back up feature prevent dry running if sensor is fouled, pump reverts to 2.5 minute cycle mode. | Voltage: 12 V | Made
Rule Mate 800 Submersible is fully automated bilge compact pump for smaller vessels with integral sensor. Air Vents in the body to help prevent air locks in challenging installations. Back up feature prevent dry running if sensor is fouled, pump reverts to 2.5 minute cycle mode. | Made in:
Low profile automatic pump for confined bilge spaces. Built-in field sensor switch, no maintenance required. Excellent operation even in case of dirt, oil, fuel, etc. Easy access to strainer. Capacity - 69 l / min, hose diameter - 25 mm, voltage - 12 V. | Voltage: 12 V | Made in: United Kingdom
Low profile automatic pump for confined bilge spaces. Built-in field sensor switch, no maintenance required. Excellent operation even in case of dirt, oil, fuel, etc. Easy access to strainer. Capacity - 40 l / min, hose diameter - 19 mm, voltage - 12 V. | Voltage: 12 V | Made in: United Kingdom
Eco-friendly automatic switch for any bilge pump, Extra-flat version. CE certified in compliance with Law 94/25, ISO 28846 standards. | Made in: Italy | Voltage: Neuvedené
12 V Bilge pump for connecting a 25 mm and 28 mm hose. For medium sized | yachts and motor boats. tough plastic body with integral strainer. The | quick release inlet strainer allows rapid cleaning. For automatic | operation use Rule Float Switches. Integrated ignition protection. | Features: Fuse
12 V Bilge pump for connecting a 28 mm hose. For medium sized yachts and motor boats. tough plastic body with integral strainer. The quick release inlet strainer allows rapid cleaning. For automatic operation use Rule Float Switches. Integrated ignition protection.FeaturesFuse size: 15
Automatic float switch for bilge pumps. Max amperage - 20 (12 V) - 10 (24 V) , OFF-ON – 19-51 mm, Cable length - 900 mm, Dimensions – 127 x 842 x 110 mm. | Made in: Italy | Dimensions: 127 x 42 x 110 mm | Voltage: 12 / 24 V
This float switch is designed for the automatic control of electrically driven bilge pumps. Designed with a reliable rolling-ball and switch system that prevents rapid on/off cycling found on some switches and is safer than mercury switches. When water lifts the chamber buoy up to 6cm, the switch
Powerful bilge pump made of sturdy plastic and is ideal for smaller boats due to its lightweight and compact design. The inlet strainer of the pump can be removed very easily, allowing for fast and thorough cleaning. The check valve prevents backflow of water into the bilge. Due to its low
Submersible pump 12 volt DCConnections: For 19 mm (3/4''), 25 mm (1'') or 28 mm (1 1/8'') bore hoseDimensions: 237 mm long, 59 mm diameterCurrent Draw: 4 AFuse Size: 7.5 AOutput: Up to 56 litres / minute (12.5 gallons / minute). Max. recommended discharge head 3 mBrings Rule pumping power to tight
24 V Bilge pump for connecting a 28 mm hose. For medium sized yachts and | motor boats. tough plastic body with integral strainer. The quick | release inlet strainer allows rapid cleaning. For automatic operation | use Rule Float Switches. Integrated ignition protection. Features: Fuse | size: 10
12 V Bilge pump for connecting a 25 mm and 28 mm hose. For medium sized yachts and motor boats. tough plastic body with integral strainer. The quick release inlet strainer allows rapid cleaning. For automatic operation use Rule Float Switches. Integrated ignition protection. Features: Fuse size: 6
Bilge water alarm panel provides an audible and visual means of warning that water level in your bilge is beyond your bilge pump switch level (not include).Height: 63,5 mmWidth: 82,6 mmSplash water proofedVoltage: 12 V | Voltage: 12 V | Made in: China
Very compact, with built-in electronic level sensor. ABS body, stainless steel shaft. Reduced current draw. Removable from plug-in base. CE certified by RINA in compliance with Law 94/25, directive ISO 28846/28849.Current draw 3 AHead 3 mHose adaptor (Ø A) 19 mm | Volumetric Flow: 45 l/min | Voltage:
Inlet Strainer for bilge pump Jabsco. Prevents unnecessary pump breakdowns caused by particles in the water. Transparent housing allows instant inspection. Screw off top allows quick in-place cleaning and removal of debris. Dimensions: 120mm long, 70mm wide, 60mm high. Connections: 19mm (3/4'') ID
Manual bilge pump manufactured from oil and petrol resistant plastic. Color: blue/orange. In-and outlet Ø 20 mm. Length – 35 cm. Includes drain hose. | Made in: Italy | Voltage: Neuvedené
Manual bilge pump manufactured from oil and petrol resistant plastic. Color: blue/orange. In-and outlet Ø 20 mm. Length – 55 cm. Includes drain hose. | Made in: Italy | Voltage: Neuvedené
The low voltage – 12v completely submersible bilge pump . Compact design with corrosion resistant ABS material body, which clips on and off for easy inspection and cleaning. For use with fresh or salt water, ideal for use on boats and marinas. | | | Made in: Italy | Dimensions: Ø 59x94,5 mm | Hose: 19
The low voltage – 12v completely submersible bilge pump . Compact design | with corrosion resistant ABS material body, which clips on and off for | easy inspection and cleaning. For use with fresh or salt water, ideal | for use on boats and marinas. | Power: 50 W | Hose: 30 mm | Weight: 1 kg | Power