Lowest price in the last 60 days: £ 96,90
Prices and availability may change several times a day. Check the current data directly in the e-shops. You can find all available colors and sizes directly in the e-shops.
Designed by acclaimed humbucking pickup guru Tim Shaw, the ShawBucker pickup is, in his words, “a new take on an old perception.” The ShawBucker retains clarity and impressive note definition while remaining resistant to 60-cycle hum and other extraneous noise. Full of multi-dimensional tone with well-defined overtones, this open-coil pickup complements and balances your guitar’s natural voice while playing well with other pickup designs. Tim Shaw’s pickups are founded in his work with the creators of humbucking pickups. The result of literally decades of R&D, ShawBucker pickups are carefully voiced for full, robust tone while remaining true to original humbucking pickup character. These feedback-resistant pickups are highly dynamic, but not microphonic, thanks to their tight winding and careful construction—no “potting” required here. Beautifully musical, the ShawBucker pickup marks a new milestone in Fender’s long history of sonic innovation. Articulate and pristine with plenty of definition, the ShawBucker 1 pickup will enhance, not overshadow or obscure, the fundamental tone of any guitar they’re installed on. We recommend using the ShawBucker 1 in either position in a HH configuration or as the bridge pickup in a HSS configuration since it blends well with single-coil pickups. The ShawBucker 2 has a slightly hotter output than the Shawbucker 1 and is recommended for use in the bridge position in an HH configuration. Made in: USA Magnet Type: Alnico II
Designed by acclaimed humbucking pickup guru Tim Shaw, the ShawBucker pickup is, in his words, “a new take on an old perception.” The ShawBucker retains clarity and impressive note definition while remaining resistant to 60-cycle hum and other extraneous noise. Full of multi-dimensional tone
Designed by acclaimed humbucking pickup guru Tim Shaw, the ShawBucker pickup is, in his words, “a new take on an old perception.” The ShawBucker retains clarity and impressive note definition while remaining resistant to 60-cycle hum and other extraneous noise. Full of multi-dimensional tone
Replacement pre-wired pickguard for electric guitar - Stratocaster Shawbucker from Fender. | Customize your tone with the Pre-Wired Stratocaster pickguards. Made with premium components in the same factory as our iconic guitars, this drop-in pickguard is easy to install. Simply remove your old
Genuine replacement Fender footswitch that restores the contemporary Fender amp’s footswitch functionality for Mustang I, Mustang II and Blues Junior models and FM series amplifiers. It comes with 3.6 m long cable and 1/4' plug. | Number of Buttons: 1 | Made in: China
Restore your contemporary Fender amp's footswitch functionality with a genuine replacement Fender footswitch. | Made in: Mexico
Fender's Guitar & Bass Multi-Tool is a 14-in-1 compact tool designed for use with Fender models as well as virtually any other make or model. Its one-piece body allows for ease of use and rotation while the included truss rod size hex wrenches are ball end for easy access. Featuring standard and
Genuine, one-ply, 8-hole Fender Stratocaster pickguard that fits the '57 American Vintage, SRV and Eric Clapton Stratocasters (USA), and '50s Stratocaster (Mexico). White colour. | Made in: USA
1-button foot switch, switches clean / drive. The current status is indicated by a red light, suitable for models Champ 110, Frontman 25, Blues Deluxe, M-80 Dual Showman (86), Princeton 65. | Made in: Mexico
Linear potentiometer 1 Meg and 3/8''potentiometer shaft. Split shaft design. Works with push-on style knobs (no set screw). Mounting hardware not included. Used as a master volume control on the American Vintage '62 Jazz master (US) and Classic Player Series (Mexico) models manufactured from
Vintage-style chrome bridge assembly used on most American Performer, Special, and Highway 1 Stratocaster models manufactured from 2002-present. Featuring 2-7/32” vintage mounting spacing but with the modern 2-1/16” string spacing, this bridge leaves a little extra room on the edges of the E
Set of two knurled flat-top control knobs designed to fit 1/4' solid-shaft potentiometers on most U.S.- and Mexico-made Telecaster and Precision Bass models manufactured from 1951-present. | Variant: Knurled
Fender cover. 100% Acrylic, protects torso reliable, machine washable, easy to install on a fender, fits all brands of fender. Diameter: 14 - 16 cm. Length: 58 - 62 cm. Color: blue. | Diameter (cm): 15.0 | Colour: Blue | Size: F1, G4 (15x56 cm) | Made in: France | Diameter: 15 cm | Package Quantity (pcs): 2
A dynamic dualmode digital pedal that controls the volume or amp/effect parameters on Mustang GT, III, IV and V amplifiers and on Mustang Floor multieffects unit. Switch between 'Volume' and 'Expression' modes by stepping on the toeend of the pedal. Red and green LEDs indicate the mode in use. The
Premium Quality Pickguard for 11 Hole 'Standard' SSS USA & MIM Stratocaster® 1-Ply MATTE BLACK. Full foil back shielding 2.4mm thick 2 layers of protective film. | Colour: Black | Made in: USA
Set of four plastic knobs for volume and tone control. Each knob is numbered 1-10. They are designed for 250K 1/4' solid-shaft potentiometers used on Mexico-made ’72 Telecaster series. The package includes also mounting screws. | Made in: Mexico
Make adjusting your intrument easy with the ''T''-style truss rod adjustment Allen wrench for use with American guitars and basses. | Made in: Taiwan
Washable cover for fendre. Made of premium polyester yarn. It resists abrasion and UV rays. No seams are distributed or worked. | Diameter (cm): 12.0 | Size: 1 (12x45 cm) | Colour: Grey | Diameter: 12 cm
The Ocean inflatable Dock fender is the most convenient solution when it comes to bumpers, providing exceptional dock and boat protection. It is the ideal fender for dock fending, fitting perfectly in every dock with easy and safe installation. | Colour: White | Made in: Bulgaria
Pure Vintage pickguards utilize many of the same materials as those used from original vendors in the '50s and '60s for an eminently classic vibe. | FEATURES- Single-ply pickguard- Five mounting-screw holes- No neck pickup adjustment holes- For most vintage and modern Telecaster guitars | Made in: USA
Two button footswitch - Instrument Effects and Mic/Line Effects. Cable with 2 x 1/4'' plugs and 3,65 m length included. | Made in: China
Package includes six '70s-style tuning machines with 'F' logo. They feature a Gear Ratio 14:1 and are especially designed for Stratocaster and Telecaster guitar series. Mounting hardware is included. | Made in: Taiwan
UV-resistant nylon clutch for attaching the fenders to the railing. Package contents: 1 pc | Made in: Italy
3-button footswitch: Channel / Gain / Reverb with 1/4 'jack.Restore footswitch operation on your current Fender® amplifier using the original replacement Fender footswitch. It contains a 1/4 'plug and a 12-foot cable. The solid construction and quality workmanship are the main advantages of Fender
American Vintage Synchronized Tremolo, Soft 'V' Shape, Alder Body, Maple Neck, 1 Tex-Mex 'Hot Bridge' Single-Coil Strat Pickup (Bridge), Single-Coil Strat Pickups (Neck and Middle), included Deluxe Gig Bag, 2 Tex-Mex Calibrated, Maple Fretboard with 21 frets, Overwound, Signature Artist Series