PRS Sonzera 50

All-tube 50-watt amplifier head for electric guitar from Senzora series that offers two independently controlled, foot-switchable channels designed for maximum versatility and in the spirit of vintage amps that allowed players to control the tone instead of the amp being in control. The clean channel delivers full, 3D tones reminiscent of American 1960’s and 70’s amplifiers. The lead channel is related to the clean channel circuit-wise, so that it can be set up to act as a boosted clean channel or manipulated to make the channels sound like two completely different amps (the lead channel can be set from slight to very heavy distortion by simply using the volume and master controls). The bright switch on the lead channel has been carefully tailored to deliver familiar high-end snap and is particularly effective on the low strings, neck pickup settings, and with single-coils, while the low-end response of the lead channel is full, tight, and clear. Both channels on the combo are designed to maximize note clarity and definition. The global presence control and the tone stack allow players to dial in a variety of tones from bell-like chime to warmer, thicker tones. The combo also features global reverb control that is designed to enhance notes without clouding them. The reverb can be turned on and off via included footswitch. The addition of a built-in effects loop allows players to use all their time-based effects with ease without negatively impacting the overall tone of the amp. In addition to its versatile tone, the combo is also designed for reliability and serviceability. The power tube sockets are mounted directly to the steel chassis, and no push-on connections are used – all wires are soldered. The combo is equipped with two EL34 power tubes, one ECC83S and three 12AX7 preamp tubes. Its rear panel offers five parallel extension speaker jacks and ohm switching (2x 4, 2x 8, 16). Cabinet of the amplifier is made of poplar plywood with stealth covering, black and cream grill cloth and gold piping. Dimensions: 610 x 241 x 267 mm. Weight: 18.2 kg. Made in: USA Power Supply: 240V External FX Loop: Yes Footswitch Input Port: Yes Incl. Footswitch: Yes Number of Input Ports: 1 Reverb: Yes Headphone Output: No MIDI Interface: No USB: No Built-in Effects: No Impedance: 16/8/4 Ohm Power: 50 W DI Output: No Number of Channels: 2 Type of Electronics in the Power Amplifier: 2x EL34 Rackmountable: No Power (Watt): 50.0 Controls: Bass Controls: Middle Controls: Treble Controls: Presence Controls: Volume Controls: Master Controls: Level Controls: Drive UK/EU Power supply included: No