Prices and availability may change several times a day. Check the current data directly in the e-shops. You can find all available colors and sizes directly in the e-shops.
1” exit, ferrite magnet compression driver with 1.75” edge-wound copper clad aluminium voice coil and one-piece PETP diaphragm and surround that provides 40W RMS power handling (AES standard) and 110dB sensitivity. It features the Sound Castle clamping, which ensures even pressure on diaphragm assembly for reduced distortion. The Finite Element Analysis (FEA) is used to optimise both magnet assembly and acoustic design. Nominal impedance: 8 Ohm. Frequency range: 1.2-20 kHz. Unit weight: 3 kg. Diameter : 1' Power RMS : 20 W Power (Watt) : 40.0 Impedance : 8 Ohm Made in : China Diameter (inch) : 1.0 Power : 40 W Power RMS (Watt) : 20.0 Type : PA
Product Celestion CDX1-1745-8 Tweeter #4490 has an EAN code 7398945363490.
Category | Speakers, Drivers |
EAN | 7398945363490 |
1” exit, ferrite magnet compression driver with 1.75” edge-wound copper clad aluminium voice coil and one-piece PETP diaphragm and surround that provides 40W RMS power handling (AES standard) and 110dB sensitivity. It features the Sound Castle clamping, which ensures even pressure on diaphragm
Very lightweight, low-profile ferrite magnet compression driver with power rating of 15 W RMS (30 W continuous) and nominal impedance of 8 Ohm. It utilizes the Finite Element Analysis (FEA) techniques used to optimise both magnetic and acoustic design and is ideal for entry-level two-way and
Very compact design for highly portable applications. 2,000Hz recommended min. crossover freq (12dB/oct). Single piece polyimide film diaphragm and surround.Power Rating: Tested for two hours on plane wave tube using continuous band-limited pink noise signal as per AES standard. Power calculated on
Very compact design for highly portable applications. 2,000Hz recommended min. crossover freq (12dB/oct). Single piece polyimide film diaphragm and surround.Power Rating: Tested for two hours on plane wave tube using continuous band-limited pink noise signal as per AES standard. Power calculated on
Celestion, one of the world’s leading suppliers of professional loudspeakers and compression drivers for sound reinforcement applications, is pleased to announce the new TFX0515 5-inch ferrite magnet coaxial driver. With a rigid pressed steel chassis, 1.5” diameter polyimide voice coil, the
Loudspeaker-type low-frequency 8” driver that provides 94dB sensitivity and 100Wrms (AES standard) power handling. It features a pressed steel chassis, a ferrite magnet, a Kevlar loaded paper cone and a 1.75” high temperature copper voice coil wound on polyimide former for increased
Loudspeaker-type low-frequency 8” driver that provides 94dB sensitivity and 100Wrms (AES standard) power handling. It features a pressed steel chassis, a ferrite magnet, a Kevlar loaded paper cone and a 1.75” high temperature copper voice coil wound on polyimide former for increased
6” mid-range driver with nominal impedance of 8 Ohm that provides 95 dB sensitivity and 100W RMS power rating (200 W continuous), ideal for two-way systems. It achieves optimal performance in compact enclosures. It features a 1.5” high temperature copper voice coil wound on polyimide former for
12” bass and mid-range driver that provides 97dB sensitivity and 250W RMS (AES standard) power handling, and features a 2.5” high temperature copper voice coil wound on polyimide for increased reliability. Optimised ferrite magnet design reduces weight, while double-roll cloth-sealed surround
12” speaker driver from Classic series with power rating of 65 W (RMS) that is perhaps the definitive vintage Celestion ceramic magnet guitar speaker: developed in the mid-sixties, it was quickly adopted by players like Hendrix, Clapton, Beck and Page, who typified the louder and more aggressive
Dedicated midrange driver. Copper sleeved pole reduces HF inductive rise. Narrow edged chassis for close packing. Airflow vented for dynamic heat dispersion.Power Rating: Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum
10” bass and mid-range driver that provides 97dB sensitivity and 150W RMS (AES standard) power handling and is ideally suited to compact enclosures and high pass systems. It features a ferrite magnet with 2” high-temperature copper voice coil wound on polyimide for increased reliability, rigid
Guitar speaker for amp modellers and IRs. The F12-X200 is a truly full range driver that delivers a frequency response from 60 Hz all the way up to 20 kHz. | This enables the F12-X200 to reproduce the full spectrum of audible frequencies, for the most accurate output possible, whatever your
12” speaker driver from Classic series with power rating of 30 W (RMS) that was originally re-released a little over a decade ago, but remains hugely popular with players looking to recreate the classic sounds of 60s and 70s rock. With a strong, aggressive low-end and powerful low-mids, it
12” speaker driver from Classic series with power rating of 30 W (RMS) that was originally re-released a little over a decade ago, but remains hugely popular with players looking to recreate the classic sounds of 60s and 70s rock. With a strong, aggressive low-end and powerful low-mids, it
The HD75 (75 watts, 12' driver, 1' tweeter) employs Hartke's patented HyDrive Speaker Technology that offers a carefully crafted hybrid (half paper, half aluminum) cone bass speaker. By combining the warmth and roundness of paper with the punch and attack of aluminum, the HyDrive design produces
The Celestion Midnight 60 speakers continue the brand's tradition and offer an upgraded version of the classic rich British sound. These are speakers with ceramic magnets and a steel chassis that includes moving parts (inspired by the V-Type design), using different magnets has the resulting sound
10 'speaker with a power of 50 Watts. From the British company CELESTION, which belongs to the TOP manufacturers of speakers. The speakers are used by all major manufacturers of devices. Their products have been among the leaders in this field for more than 80 years.Technical specifications:•
Guitar speaker from Celestion. G10 Creamback packs everything guitar players love about Creamback speakers into a 10-inch format. Hand-built in the UK using the same production methods and materials developed for the 12-inch models, the G10 Creamback uses a ceramic magnet and a 1.75-inch voice coil
The G12M-50 Hempback is the first ever hemp cone guitar speaker built by Celestion. It features a cone specifically chosen for its tonal character combined with a medium-weight (35oz) ceramic magnet, Well defined and powerful the speaker delivers a thump in the low end, a finely balanced midrange
Throughout his career, whether in the studio or on the stage, the Celestion 20-watt ‘Greenback’ has played an essential role to Edward Van Halen in making the tones that rewrote the book on guitar sound.When it came time to select speakers for his new EVH Brand 5150-III signature amp, there was
With a 90-watt power rating, the Celestion Cream is purpose-built for vintage tones, whatever kind of amp you use. By applying new technologies and manufacturing methods developed during the creation of our Creamback speakers, we’ve been able to deliver a higher power rating while preserving the
25W/8 Ohm, 12' guitar speaker | Type: Guitar Loudspeaker | Power (Watt): 25.0 | Impedance: 8 Ohm | Power: 25 W | Sensitivity: 98 dB | Weight: 3,6 kg | Diameter (inch): 12.0 | Sensitivity (dB): 98.0 | Magnet Type: Ceramic | Made in: China | Frequency Range: 75 Hz - 5 kHz | Diameter: 12'
The HT Venue MK III has outstanding speaker cabinet that is equipped with Celestion driver and have been voiced to work with the HT Venue MK III amplifiers, as well as a wide range of other products. The cab have finger-locked (comb) joints, heavy duty wiring and a cool vintage styling. The HTV 112