Prices and availability may change several times a day. Check the current data directly in the e-shops. You can find all available colors and sizes directly in the e-shops.
Footswitch toppers set. The Mooer Candy Footswitch toppers are colorful plastic bumpers intended to be put on the footswitch of your pedals. Some guys are using them for the ''hard to reach'' footswitches which might otherwise require a tactically aimed big toe to successfully engage without disturbing anything else. Some people just like them as a bit of fun or as a way for them to pimp up their pedals. Fits most available footswitches. Set of 10 pieces in different colors Made in: China
wireless footswitch for Mooer GTRS guitars | changes presets and tone settings while playing | tap tempo control for selected presets with delay effect | built-in tuner function for GTRS guitar | 2.4 GHz ISM band for worldwide use | built-in rechargeable lithium-ion battery (720 mAh) | 4 footswitches | Power
The AirSwitch is the ultimate expansion for your MOOER digital pedals. This handy wireless controller connects seamlessly with select MOOER products and provides an additional 4 footswitches for unparalleled control over your effects. AirSwitch connects to pedals completely free of cables and has a
Switcher and signal splitter. A/B or A&B to Y mode switch, on/off footswitch, status LED (A: red, B: blue, Y: pink), 3 in-/outputs A/B/Y, 6,3 mm mono jack, optional AC adapter 9V DC (center minus plug), can be used w/o power supply (LED stays off), metal housing, dimensions (D x W x H): 93,5 mm x
Featuring support for 6 effects loops with 36 programmable presets (6 banks with 6 presets each), the Mooer Pedal Controller L6 MKII can enhance and control even the most robust pedal and multi-effects setups. The programmable 6-channel loop switcher allows users to choose between two ways to
Acoustic guitar effect Reverb pedal. Decay control, Mini controls for Mix and Tone, Rate or Range depending on mode, Mode Switch (Reverb / Modulation / Filter), 6.35 mm mono IN/OUT jacks, Power Requirements: AC adapter 9V DC (center minus plug), Current Draw: 130 mA. Status LED. Metal housing. True
Guitar effect Pitch Shifting pedal. 3 FX modes: Harmony - Pitch-shifting with mix of original signal, Pitch Shift - Creates a precise, polyphonic, pitched signal, Detune - Creates a slightly detuned signal, mixed with original signal for chorus-like effects, Pitch range: - 2 to + 2 octaves. Metal
The WET Only Footswitch serves as a remote foot-controller that bypasses the SPLIT & MIX toggle switch on the PLUS Pedal’s side panel, thus letting you switch in and out of the WET Only mode on the fly.This flexibility allows you to build up a rich layer of ambient sound effects and then quickly
Switch effect for dynamic microphones. Switch your vocal mic between the FOH and monitor mixing desks. Two different sound configurations: to switch between different effects or sounds on your microphone, you can also use the DMS to route the signal to two rooms or zones and select either one