Prices and availability may change several times a day. Check the current data directly in the e-shops. You can find all available colors and sizes directly in the e-shops.
Connections for 19 mm, Fuse Size- 10 A, Max. Current – 8 A, Output - up to 16 l/min. Robust, quiet single diaphragm design, no strainer required, single diaphragm design allows extended dry running. Self-primes up to 3 m vertical lift. Multi-positional ports for easy mounting. Rated for up to 30 minutes continuous running. Dimensions - 294 mm long, 159 mm wide, 132 mm high. Voltage : 12 V Made in : China
Product Jabsco 50880-1000 Shower Drain and Bilge Pump 12V is marked with an EAN code 6718805815616.
Category | Pumps |
EAN | 6718805815616 |
Inlet Strainer for bilge pump Jabsco. Prevents unnecessary pump breakdowns caused by particles in the water. Transparent housing allows instant inspection. Screw off top allows quick in-place cleaning and removal of debris. Dimensions: 120mm long, 70mm wide, 60mm high. Connections: 19mm (3/4'') ID
The low voltage – 12v completely submersible bilge pump . Compact design with corrosion resistant ABS material body, which clips on and off for easy inspection and cleaning. For use with fresh or salt water, ideal for use on boats and marinas. | | | Made in: Italy | Dimensions: Ø 59x94,5 mm | Voltage:
The low voltage – 12v completely submersible bilge pump . Compact design | with corrosion resistant ABS material body, which clips on and off for | easy inspection and cleaning. For use with fresh or salt water, ideal | for use on boats and marinas. | Hose: 30 mm | Made in: Italy | Power: 50
12 V completely submersible bilge pump . Compact design with corrosion | resistant ABS material body, which clips on and off for easy inspection | and cleaning. For use with fresh or salt water, ideal for use on boats | and marinas. | Voltage: 12 V | Weight: 1,5 kg | Power Consumption: 10 A | Power: 120
12 V completely submersible bilge pump . Compact design with corrosion | resistant ABS material body, which clips on and off for easy inspection | and cleaning. For use with fresh or salt water, ideal for use on boats | and marinas. | | | | Hose: 32 mm | Weight: 2 kg | Made in: Italy | Fuse: 25
12 V Bilge pump for connecting a 25 mm and 28 mm hose. For medium sized yachts and motor boats. tough plastic body with integral strainer. The quick release inlet strainer allows rapid cleaning. For automatic operation use Rule Float Switches. Integrated ignition protection. Features: Fuse size: 6
12 V Bilge pump for connecting a 25 mm and 28 mm hose. For medium sized | yachts and motor boats. tough plastic body with integral strainer. The | quick release inlet strainer allows rapid cleaning. For automatic | operation use Rule Float Switches. Integrated ignition protection. | Features: Fuse
12 V Bilge pump for connecting a 28 mm hose. For medium sized yachts and motor boats. tough plastic body with integral strainer. The quick release inlet strainer allows rapid cleaning. For automatic operation use Rule Float Switches. Integrated ignition protection.FeaturesFuse size: 15
Connections: for 13mm (½”) bore hoseDimensions: 230mm long, 152mm wide, 110mm highFuse Size: 10(amp)Maximum Current: 4.4(amps)Output: 11 litres/minute (2.4 gallons/minute) open flowPRESSURE SWITCH - cuts in at 1.4bar (20psi) - cuts out at 2.8bar (40psi)Efficient, high-flow, self-priming pump
Very efficient self-priming waste pump (up to 1.2 m). Weight - 2.3 kg. Dimensions: 298 x 119 x 82 mm, power supply - 12 V, power - 45 l/min, hose diameter - 38 mm/25 mm. | Voltage: 12 V | Weight: 2,3 kg | Made in: Great Britain | Colour: Black | Dimensions: 298x119x82 mm
Very efficient self-priming waste pump (up to 1.2 m). Weight - 2.3 kg. Dimensions: 298 x 119 x 82 mm, power supply - 12 V, power - 45 l/min, hose diameter - 38 mm/25 mm. | Dimensions: 298x119x82 mm | Voltage: 12 V | Made in: Great Britain | Colour: Black | Weight: 2,3 kg
This float switch is designed for the automatic control of electrically driven bilge pumps. Designed with a reliable rolling-ball and switch system that prevents rapid on/off cycling found on some switches and is safer than mercury switches. When water lifts the chamber buoy up to 6cm, the switch
Powerful bilge pump made of sturdy plastic and is ideal for smaller boats due to its lightweight and compact design. The inlet strainer of the pump can be removed very easily, allowing for fast and thorough cleaning. The check valve prevents backflow of water into the bilge. Due to its low
Connections: for 13mm (½”) bore hoseDimensions: 230mm long, 152mm wide, 110mm highFuse Size: 10(amp)Maximum Current: 4.4(amps)Output: 11 litres/minute (2.4 gallons/minute) open flowPRESSURE SWITCH - cuts in at 1.0bar (15psi) - cuts out at 1.7bar (25psi)Efficient, high-flow, self-priming pump
Connections: for 13mm (½”) bore hose or Hep20 push-fit connectors CW193Dimensions: 231mm long, 99mm wide, 106mm highFuse Size: 10(amp)Maximum Current: 6(amps)Output: 7.6 litres/minute (2 gallons/minute) open flowPRESSURE SWITCH - cuts in at 1.7bar (25psi) - cuts out at 2.4bar (35psi)Efficient,
Submersible pump 12 volt DCConnections: For 19 mm (3/4''), 25 mm (1'') or 28 mm (1 1/8'') bore hoseDimensions: 237 mm long, 59 mm diameterCurrent Draw: 4 AFuse Size: 7.5 AOutput: Up to 56 litres / minute (12.5 gallons / minute). Max. recommended discharge head 3 mBrings Rule pumping power to tight
Jabsco 18653-0001-P Neoprene Impeller fits the following Jabsco Pumps:29410-1101, 29440-1001, 29440-1051, 29440-1101, 29440-1201, 29460-1001, 29460-1101, 29460-1201, 29460-1251, 29460-1301, 29460-1401, 29460-1431, 29460-1631, 29460-1701, 29460-2231, 29460-2501, 29470-1101, 29470-1231, 29470-1231C,
Manual bilge pump manufactured from oil and petrol resistant plastic. Color: blue/orange. In-and outlet Ø 20 mm. Length – 35 cm. Includes drain hose. | Voltage: Neuvedené | Made in: Italy
Manual bilge pump manufactured from oil and petrol resistant plastic. Color: blue/orange. In-and outlet Ø 20 mm. Length – 55 cm. Includes drain hose. | Voltage: Neuvedené | Made in: Italy
Low profile automatic pump for confined bilge spaces. Built-in field sensor switch, no maintenance required. Excellent operation even in case of dirt, oil, fuel, etc. Easy access to strainer. Capacity - 40 l / min, hose diameter - 19 mm, voltage - 12 V. | Made in: United Kingdom | Voltage: 12 V
Low profile automatic pump for confined bilge spaces. Built-in field sensor switch, no maintenance required. Excellent operation even in case of dirt, oil, fuel, etc. Easy access to strainer. Capacity - 69 l / min, hose diameter - 25 mm, voltage - 12 V. | Voltage: 12 V | Made in: United Kingdom
Fully automatic bilge pump. Switch on when the water reaches a height of | 60 mm, when the water is depleted, the pump automatically turns off. | Unique sensor technology ensures that the pump only switches on when it | is in contact with water, and the pump does not switch on when it comes | to oil -
Fully automatic bilge pump. Switch on when the water reaches a height of | 60 mm, when the water is depleted, the pump automatically turns off. | Unique sensor technology ensures that the pump only switches on when it | is in contact with water, and the pump does not switch on when it comes | to oil -
24 V completely submersible bilge pump . Compact design with corrosion | resistant ABS material body, which clips on and off for easy inspection | and cleaning. For use with fresh or salt water, ideal for use on boats | and marinas. | | | Weight: 3,2 kg | Made in: Italy | Voltage: 24 V | Power