Prices and availability may change several times a day. Check the current data directly in the e-shops. You can find all available colors and sizes directly in the e-shops.
Professional pop-filter, 2ply nylon filter, colour: black Made in : China
Product Superlux MA 91 Pop-filter is marked by the EAN code 4710423842243.
Category | Microphones |
EAN | 4710423842243 |
1/2' condenser microphone with a 3 m thin film diaphragm, replaceable capsule and low cut filters, and low noise pre-amp circuits. It is ideal for use in recording, sounding vocals, guitar and percussion. It provides good frequency range (20-20000 Hz), high sensitivity and RF immunity. Included is
Flexible and adjustable metal screen pop filter for microphone that is equipped with gooseneck and universal adjustable clip with fastening screw. | Made in: China
Adjustable and flexible nylon screen microphone pop filter with gooseneck and universal adjustable clip with fastening screw. | Made in: China
Pop Filter compatible with Apogee Mics: HypeMiC, MiC+, NITE MiC & MiC 96k . | Type : Pop Filter | Compatibility : Apogee Mics: HypeMiC, MiC+, NITE MiC & MiC 96k
The double nylon net microphone wind screen pop filter helps you against plosion and popping to get your best vocal recordings. 360°flexible gooseneck arm allows you to adjust the suitable angle and precise positioning to show your perfect voice. | Application: Recording | Weight: 180 g | Diameter (mm):
Tired of placing goosenecks and clamping pop filters? Try the unique Pop Filter PF06 from Alctron. It is attached directly to the microphone with rubber bands. The transparent layer is hydrophobic and prevents moisture from penetrating the microphone. The PF06 is suitable for most side address
The GM-POP FILTER from Gator Frameworks provides the perfect protection against plosives and popping. This double-layered, split level filter attaches quickly to most standard mic shafts and booms with an adjustable C-clamp. Wind noise and plosives are drastically reduced through Gator’s 6″
Flexible and adjustable highquality pop filter with oversized archshaped face that is suitable for the curvature of most large diaphragm studio condenser microphones. It features a gooseneck and universal adjustable clip with fastening screw. | Made in: China
Flexible and adjustable highquality pop filter with oversized archshaped face that is suitable for the curvature of most large diaphragm studio condenser microphones. It features a gooseneck and universal adjustable clip with fastening screw. | Made in: China
Pop filter that is widely recognized throughout the recording and postproduction communities as the leading tool in pop elimination technology. With a 6' (7.62 cm) diameter, the highly durable fourlayer screen stops plosive consonants while the fully adjustable 14' (35.56 cm) gooseneck and mic
The Austrian Audio OCP8 pop filter designed specifically for OC18 or OC818 mics. The filter attenuates plosives and wind noise, while allowing the mic to clearly capture the sound of your source
Pop filter with adjustable height and a mounting ring for easy installation. Color: Black. | Type: Pop Filter | Made in: China | Compatible with: Microphone
The pop-filter PS 20 A is used to limit the 'pop' sounds (disturbing sounds arising when pronouncing the sounds 'p' and 'b'). It consists of a circular frame covered with special gauze and a 'goose neck' for optimal adjustment. It is attached to the microphone stand with a screw clamp. The diameter
The pop-filter PS 15 is used to limit the 'pop' sounds (disturbing sounds arising when pronouncing the sounds 'p' and 'b'). It consists of a circular frame covered with special gauze and a 'goose neck' for optimal adjustment. It is attached to the microphone stand with a screw clamp. The diameter
Circular steel-mesh pop filter designed for reducing plosive pops on vocal recordings that comes with a goose neck and a stand clamp for easy positioning. | Made in: China
Highly effective POP filter with dual screen suitable for high-quality voice recording without disturbing plosives and ambient noise. The POP filter is made of quality materials, has a threaded clamp for attachment to a microphone stand and a highly flexible gooseneck for optimal adjustment. | Length
Metal pop filter. This unique metal screen is not simply perforated, but implements a slightly convex shape to redirect low-frequency air blasts to the side of the screen. This process does not attenuate high frequencies and leaves the vocal performance completely unaffected, minus any disruptive
Effective dual pop filter. A simple but highly effective solution to the problem of needing different pop shields for different vocal performances. The Dual Pro Pop uses a rock-solid gooseneck with both a standard fabric membrane and our professional metal pop shield on a hinged mechanism. You can
Magnetic pop filter to effectively reduce pop and hiss sounds. Compatible with LCT 40 SHx, LCT 40 SH shock mounts and microphones LCT640TS, LCT440PURE, LCT540SUBZERO, LCT441FLEX, LCT540S, LCT240PRO. | Type: Pop Filter | Incl. Gig bag/Case: None | Application: Recording;Studio | Made in: China
Elastic anti-vibration microphone holder Spider type. Superlux HM57 Spider Microphone Holder suitable for Microphones CMH8A / B / C / D / G and CMH8-AH / BH / CH. Thread M22x1, 2 colors to choose from: silver metallic and black. The kit includes a YA2 adapter for different types of microphone
Pop microphone filter. With flexible shoulder and adjustable holder. | Made in: China
SwiftShield combines the Aston Swift shock mount and the Aston Shield pop filter into one bundle to give you the perfect setup for your studio vocal mic. The Aston Swift shock mount takes microphone mounting to the next level of ease. With 2 quick release spring clips designed to fit a wide range
Electret condenser boundary microphone from the E series. This boundary microphone is designed for flat surfaces and suitable for recording of broadcast, conferences or lectures. Microphone features frequency response of 30 – 18 000 Hz, -39 dBV/Pa (11.2 mV) sensibility, 600 Ohm impedance,
Electret condenser boundary microphone from the E series. This boundary microphone is designed for flat surfaces and suitable for recording of broadcast, conferences or lectures. Microphone features frequency response of 30 – 18 000 Hz, -39 dBV/Pa (11.2 mV) sensibility, 600 Ohm impedance,