Lowest price in the last 60 days: £ 167
Prices and availability may change several times a day. Check the current data directly in the e-shops. You can find all available colors and sizes directly in the e-shops.
The Sadowsky Onboard Bass Preamp (4-Knob System) is a completely prewired system offering the same controls and the same legendary active preamp as all Sadowsky basses. This preamp is designed for installation on most J-style basses with a metal control plate. On newer active J-style basses with a side jack and a battery compartment, usually no modification is required. On passive basses, the only required modification is to move the output jack to the side of the instrument and to make room for a battery. The controls are: Volume – Pan (Balance) – VTC (Vintage Tone Control) – Treble / Bass. The treble and bass controls are boost only - flat response is with the controls at their complete counterclockwise position. The VTC control is passive, the maximum setting is a flat EQ. The further you turn the control down, the more the high end in the signal will be attenuated. The preamp can be installed either with the included control plate or mounted through a rear control cavity in either a 4-in-line or diamond pattern. This system is not compatible with active pickups requiring anything else than a 250K or 500K volume or balance pot. Made in: USA Battery Operation: Yes Controls: Tone;Treble;Bass;Master Volume;Balance Electronics: Active UK/EU Power supply included: No Battery Type: 9V Power Supply: None, Only Battery Operated
The Sadowsky Onboard Bass Preamp (4-Knob System) is a completely prewired system offering the same controls and the same legendary active preamp as all Sadowsky basses. This preamp is designed for installation on most J-style basses with a metal control plate. On newer active J-style basses with a
On board bass preamp. The OBP-3 is Aguilar’s most flexible onboard preamp design, providing +/-18 dB of cut and boost at 40 Hz, +/- 16 dB of cut and boost at either 400 Hz or 800 Hz and +/- 16 dB of treble cut and boost at 6,5 kHz. The OBP-3 has multiple wiring options, and can be wired with
Active bass preamp for passive pickups. High headroom, low-noise, 3-Band active onboard EQ preamp designed for use with passive pickups. Comes with prewired 4-knob harness. The STC-3P Tone Circuit provides bass and treble controls, a master volume, a blend control, and our proprietary Slap Switch
The new Efektor Bass Cruncher Preamp, Bass Smasher Distortion, and Bass Driver Preamp pedals. This bundle offer a full spectrum of distorted bass tones to achieve tonal varieties, add bites, and solid aggression to bass tracks.While these pedals are developed specifically for bass guitar, they are
R-26 MONOMYTH is a BASS PREAMP pedal with multiple tone-sculpting options. It features a 6-band graphic EQ, lifelike cab sim tone, with an independent OVERDRIVE Channel, TREBLE Boost switch, and GAIN Boost switch, enhancing your recording sessions, stage performance, etc, and dialing in what you
The Dual Bass Station Bass Preamp features two inputs (A/B) and independent EQ-Masters for each input. When only “IN-A” is used, two different presets can be used by switching channels from A to B.Both channels feature versatile 3-band equalizers that are ideal for use with a wide range of
Single channel bass amp head. Class D power amp with valve preamp, variable input sensitivity for active or passive basses, balanced DI out, FX loop. Controls: Master, Treble, Middle, Bass, Gain. Output Power: 500 Watts. Valves: Preamp: 2 x Ecc83/12ax7. Speaker output options: 1 x 8 cabinet
The essence of Plug and Play. GR Bass PreAmp lets you play by directly connecting your bass, pedals, or an external preamp, all you have to do is turn up the volume and play. No EQ section, just your pure sound, and a top quality D.I. | Compressor: No | DI Output: Yes | Type of Electronics in the Power
The essence of Plug and Play. GR Bass PreAmp lets you play by directly connecting your bass, pedals, or an external preamp, all you have to do is turn up the volume and play. No EQ section, just your pure sound, and a top quality D.I. | Footswitch Input Port: No | Rackmountable: No | MP3 / Line In:
A preamp/boost effect for electric guitars, acoustic guitars or bass guitars. This is a true interpretation of the Boss FA-1 FET with JHS enhancement. In addition, it is equipped with a simple and effective equalizer. The effect is ideal for building distorted pedals, but its true charm lies in
250 Watt portable bass head with mosfet preamp and thrust compressor. Compact and lightweight design for ultimate portability. Cutting-edge Class-D amplifier technology for incredible power and sonic performance. High-voltage Mosfet preamplifier for authentic sound and feel of a tube amp. Thrust
500 Watt portable bass head with mosfet preamp and thrust compressor. Compact and lightweight design for ultimate portability. Cutting-edge Class-D amplifier technology for incredible power and sonic performance. High-voltage Mosfet preamplifier for authentic sound and feel of a tube amp. Thrust
MLD Bass Preamp + DI has tons of functions based on Melvin Lee Davis' musical experience. And offers the best sound-shaping controls such as: 3-band EQ with middle-frequency selection, drive with blend control, speaker cabinet simulation (Impulse Response loader) and built-in noise reduction with
On board bass preamp. The OBP-1’s boost-only design gives you the tone shaping benefits of active electronics without losing the inherent sound of the instrument. The OBP-1’s discrete, all-FET circuitry features up to 18dB of boost at 40Hz and 4kHz, creating a sonic environment high in dynamic
Bass and Treble Shelving, 12AX7 High Voltage Class-A tube preamp circuit, 2 U, limiter switch with LED indicator, mid-peak EQ controls, 19', dimensions: 483mm x 369mm x 83mm, Bass Head, 2x 500 Watts or 1x 1000 Watt, Speakon and 1/4-inch output connectors, XLR balanced direct output, effects loop,
Bass guitar, Class D Amplifier with 2000 W power. It contains powerful tube preamp with 3 x 12AX7 tubes, and offers rich and harmonic tube sound. It features optical compressor, Dynamizer Power Management technology, has controls for Bass, Mid and Treble, selectable mid frequency switch, passive