Lowest price in the last 45 days: £ 345
Prices and availability may change several times a day. Check the current data directly in the e-shops. You can find all available colors and sizes directly in the e-shops.
Reference class headphone amplifier with Stereo, Mono, and Dual Mono operation modes. In Stereo mode, the L/R input signal is fed to the left and right earphones while the volume level is set by the Stereo/Left control. The front panel inputs provide simultaneous connection of two headphones in parallel. In Mono mode, the left and right channels are summed, and the resulting mono signal is fed to both the left and right earphones. Again, volume is governed by the Stereo/Left control. In Dual Mono mode, the left and right channels can be used independently with individual level controls for the left and right earphones. The PHDA02 operates with all headphones with an impedance of 8 up to 200 Ohms. Impedance matching is achieved by a specially designed switchable transformer. Uncommon and costly, this solution provides superior performance, dynamic range, and signal- to-noise ratio at all loads. Combo input sockets allow for balanced XLR and unbalanced TS headphone connection while parallel XLR outputs facilitate daisy chaining multiple units. The integrated power supply operates with mains from 100 VAC to 240 VAC. The PHDA02 is equipped with low-noise op amps, and the output amplifiers' discrete power transistors are mounted on heatsinks. Dimensions are 1 U 9.5'. Power Supply: Adapter, USB Battery Operation: No Type: Headphone Amp UK/EU Power supply included: Yes Colour: Black Made in: Germany Inputs: Combo (XLR/Jack) Controls: Volume
Product Palmer PHDA 02 is described by the EAN code 4049521090677.
Color | Black |
Category | Amplifiers, Headphones |
EAN | 4049521090677 |
Reference class headphone amplifier with Stereo, Mono, and Dual Mono operation modes. In Stereo mode, the L/R input signal is fed to the left and right earphones while the volume level is set by the Stereo/Left control. The front panel inputs provide simultaneous connection of two headphones in
You found your perfect amplifier sound, but it sounds different on every stage?The Palmer Ilm speaker simulation box eliminates all the uncertainties of amp micing, such as microphone selection, acoustic environment and location. With a sophisticated filter switch that simulates the sound behavior
Switch effect. Routes the guitar signal to the chosen amplifier, while the second unused amplifier is turned off to prevent unwanted interference. The gain from the instrument input to output is one (Unity Gain). The built-in buffer only converts the impedance, so that a high-impedance guitar
Headphone amplifier for pedalboards. The new Mooer Audiofile is a professional headphone amplifier, specifically designed for use with guitar and bass pedalboards. It utilizes an analog Class A amplification circuit that secures the purity, warmth and wide dynamic range of the input signal from
HA4 PLUS mini headphone amplifier splits a single stereo signal into four headphone outputs. The unique circuitry delivers top-notch sound even in a harsh environment. Each channel comes with its own level control without interaction. Its USB power supply design allows it powered by phone charger,
Special DI box with Loadbox 16 Ohms. The integrated load resistor permits tube amplifiers up to approximately 120 W to be connected to the PGA04, bypassing a loudspeaker. A jack socket (unbalanced) and balanced XLR connector are available for direct pickup of the signal. The extensive filter
Stereo headphone amplifier. 4 separate headphone amplifiers in one housing. 1 level control each per amplifier. 6.3 mm stereo input. 6.3 mm stereo outputs. Frequency range: 20 - 20000 Hz. Input signal: 300 mV. Output signal: 2 x 16 mW/8 Ohm, 2 x 35 mW/32 Ohm, 2 x 15 mW/600 Ohm (per headphone). S/N
Professional multi-purpose headphones amplifier system for stage and studio applications. 6 independent amplifier sections that provide up to 6 stereo mixes with individual Balance controls. Stereo auxiliary inputs for each channel make adding in any extra sound source easy. Bass and Treble EQ on
Superlux HA3D is a portable, stereo headphone amplifier designed for demanding and critical audio monitoring. This audiophile-quality headphone amp is ideal for adding headphone feeds for portable, studio, and audio enthusiast applications. The HA3D provides 3 independent headphone feeds from
The innovated, second version of the xDuoo Link headphone amplifier and converter will significantly improve the sound from modern mobile phones and tablets. It meets the Hi-Res audio standard and supports sampling up to 32bit / 384kHz and DSD256. With its compact body and weight of only 13g, the
The Aune S9c Pro is an exceptional DAC with headphone amplifier that impresses with innovative features and first-class sound quality. With full clock synchronisation and a second-generation ultra-low jitter PLL core, the S9c Pro guarantees precise and lifelike sound reproduction. Supported by
The Aune S9c Pro is an exceptional DAC with headphone amplifier that impresses with innovative features and first-class sound quality. With full clock synchronisation and a second-generation ultra-low jitter PLL core, the S9c Pro guarantees precise and lifelike sound reproduction. Supported by
Compact four-channel headphone amplifier that delivers clear and clean sound with a wide dynamic range, equipped with four screaming-loud (150 mW per channel) stereo 6.3mm headphone outputs on the front panel. It provides headphone level control and mono summing switch for each channel, and monitor
The QH4 is a 4-channel headphone amplifier designed to distribute your audio to up to four individual headphones, each with its own volume control. Its compact design is perfect for use with any studio or desktop workstation, as well as with your laptop or smartphone when you're recording on the
Compact headphone amplifier. Packing as many features as possible into the small format chassis, the HeadAmp4Pro has five stereo headphone outs, each with their own volume control. A separate footswitchable XLR input (with phantom power) allows instant talkback to any one, or all of the connected
Professional Headphone Amplifier System for Stage and Studio Applications. 8 Independent Stereo Amplifier Sections, 8 Independent Direct Inputs, 2x Main Stereo Inputs, 8-Digit LED Output Meter Per Channel, Mono/Stereo Switch Per Channel, TRS Front & Rear Phones Connector, Parallel main outputs
The thumb-sized K1 from FiiO is a portable headphone amplifier and DAC with mastering quality sound that supports resolutions of up to 24 - bit / 96 kHz. The unit offers true plug-and-play operation with no batteries to charge and no drivers required for operation. The K1's audio architecture
The AM2 medium powered headphone amplifier module for the X7 high resolution music player utilizes the MUSES02 operational amplifier for voltage amplification. Together with the BUF634 buffer, this amplifier module is capable of ultra-high current drive (250mA) and ultra-low noise and distortion,
The miniature portable headphone amplifier FiiO KA3 is suitable mainly for use with a mobile phone and thanks to its dimensions it fits comfortably in a pocket. Thanks to the USB-C input, it is compatible with current mobile phones and ensures clear and detailed sound reproduction. The FiiO KA3
HP60 headphone distribution system, you can easily resolve these problems and provide headphone mixes the musicians will love. That’s because the HP60 is more than a half-dozen headphone amps; it’s a field-tested, easy-to-use solution to a host of common headphone-monitoring issues.Each of the
Six channel headphone amplifier. It has six channels with separate Bass and Treble control, and with an 8-segment LED indicator on all channels. The output connectors are located on both the front and rear panels, and the device can be used as Stereo, Mono Left, Mono Right, or Summed Mono. It also
FiiO K5PRO ESS is a compact desktop DAC and headphone amplifier with the new ESS9038Q2M DAC and an output power of up to 1.5 W.32BIT / 768kHz, the DSD512 capable K5PRO ESS uses the ESS ES9038Q2M DAC for decoding while offering an output power of up to 1500 mW and can operate as a standalone
Portable guitar preamp. Delivers an extended range of authentic tube amplifier tones from high headroom ultra clean to maxed out high gain distortion. With 3-position selector switches for amplifier design, gain structure and loudspeaker miking simulation the MK 2's hot rodded circuitry lets you
Headphone amplifier equipped with an XMOS USB receiving chip that can decode up to 384kHz / 32-bit PMC and native DSD256. All-aluminum body conceals AKM AK4452 audio chip with 32-bit Velvet Sound technology. Connectivity is provided by USB type C / DAC with audio switch, output: coaxial, optical