Lowest price in the last 45 days: £ 57,60
Prices and availability may change several times a day. Check the current data directly in the e-shops. You can find all available colors and sizes directly in the e-shops.
Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special 'floating ground' circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm. Weight: 0,36 kg Power Supply: 48V Phantom Battery Operation: Yes Type: DI Box UK/EU Power supply included: No Made in: Germany
Product Palmer PAN 02 is described by the EAN code 4049521048982.
Category | Boxes, Batteries |
EAN | 4049521048982 |
Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum
Passive 2-channel DI Box. The PAN-04 consists of a housing containing the equivalent of two PAN-01s, making it a dual channel passive DI box. This „stereo' configuration makes it ideally suited for use with certain keyboards and devices which have several outputs.ive DI box. Jack input with
Active 2-channel DI Box. The Palmer PAN04A 2-channel DI box allows you to feed the unbalanced hi-Z signals of electric instruments to the microphone inputs of a mixer. It delivers a transformer balanced lo-Z signal at the outputs and helps eliminate hum and interference caused by ground loops. The
Passive DI box. Jack input with paralell 'THRU' output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals. Channels:1, Inputs: 1, Input connectors: 6.3 mm Jack, Max. input level: + 54 dBu. Input impedance: | Type: DI Box | Made in:
Active 4-channel 19' DI/Line Isolation Box. The PAN08 is a multifunctional device. Each of the four channels can be used independently as an active DI box, line isolation box or booster. The combination socket input accepts unbalanced and balanced signals. The output has dual transformer balanced
Passive 8-channels 19' DI Box. Through the special MERGE LINK/IN function, the front LINK output can be used as a second input.The signal is then mono merged with the one from the INPUT jack through to the output. Thus, the PAN16 offers a maximum of 16 inputs. Two PAD buttons enable an attenuation
2-Channel Phantom Power Supply. Palmer Pan 48 is a unit for the external power supply of phantom powered appliances. Due to the high current level of a maximum of 20mA, the application is not just limited to condenser microphones. PAN 48 is excellent for supplying phantom powered active DI-boxes
Whether you're a stage professional or amateur, no power means no performance! That's why we've developed a charging tray for the Palmer PBC400 battery charger to ensure that your devices attached to a 9 V battery never run out of power. Measuring just under 10 cm, this practical charging tray can
Keep your microphones, in-ear monitors, effect pedals and other battery-powered devices operational at all times with the professional 19' Palmer BC 400 AA battery charger. It is controlled by a micro-controller and charges up to 16 AA or AAA batteries at the same time, including a combination of
Reversed DI Box. Many try using a DI-Box 'backwards' in order to convert a balanced signal to unbalanced. The resulting mismatch generally leads to disappointing results. The PDIR (DI-Reverse) offers a clean and reliable solution whilst additionally isolating the two connected devices via
Polyethylene box for high-capacity batteries from 120 A / h to 220 A / h with cover. External dimensions - 600 x 300 x 300 mm, internal dimensions - 515 x 225 x 252 mm. | UK/EU Power supply included: No | Made in: China
You found your perfect amplifier sound, but it sounds different on every stage?The Palmer Ilm speaker simulation box eliminates all the uncertainties of amp micing, such as microphone selection, acoustic environment and location. With a sophisticated filter switch that simulates the sound behavior
Splitter effect. Converting the hi-Z guitar signal, the FET input circuitry also drives a transformer which routes the ungrounded signal to the output to eliminate ground loop hum. 9V battery operation is recommended. Can also be used as a line driver for long cable runs and features a phase
Plastic box for stricter storage of the battery. Outer dimensions: 360 x 240 x 270 mm, internal dimensions: 265 x 175 x 205 mm. | UK/EU Power supply included: No | Made in: China | Current (A): 95.0 | Current: 95 A
Passive Cabinet Merger. The concept behind Palmer's Cab Merger may be very simple, but the unit fills an important gap! Have you ever wanted to connect two guitar cabinets to just one amplifier output? It's quite simple with the PCABM! In addition, you can choose parallel or series wiring. For
Passive 4-channel DI Box in a 19' housing. Each channel has a jack input with a parallel output for looping the signal through. An attenuation switch (-30 dB) permits connection of a line or speaker signal at the user's choice. The specifications are identical with those of the PAN 01. All
2-channel stereo line level merge box that can be used to merge two stereo line signals into one stereo output. One classic application: routing two mixing desks to one PA system. The unit has enough amplification to boost even semi-professional levels accordingly. The input channels are
Convenient battery box with lid, 2 x 12 V outlet, external wing nut socket for connecting, for example, an electric motor or battery charger. Also, the battery box with a convenient battery tester; with the push of a button are you aware of the battery status. This battery box is the ideal solution
We have all had the same experience:At home, the sound was sharp and clear, but during the presentation it buzzes and buzzes and there is no time to find out the cause.This is where Palmer Vils comes in, as it safely isolates the terrestrial potentials of laptops, media devices and PA
Reamping is a valuable recording technique used by many sound engineers.It allows you to experiment in your spare time by playing guitar, bass, keyboard, drums and even vocal tracks through amplifiers and effects pedals. As with many other techniques, you need the right tools.Palmer Trave is a
Special DI box with Loadbox 16 Ohms. The integrated load resistor permits tube amplifiers up to approximately 120 W to be connected to the PGA04, bypassing a loudspeaker. A jack socket (unbalanced) and balanced XLR connector are available for direct pickup of the signal. The extensive filter
Battery storage box. The strap supplied with the battery serves to secure the box and protects it from being tilted. It is further equipped with a separator partition to accommodate smaller batteries. In addition, the cover can be raised by 30 mm with 4 pads. Outer dimensions: 370x210x250 mm
Battery storage box. The strap supplied with the battery serves to secure the box and protects it from being tilted. It is further equipped with a separator partition to accommodate smaller batteries. In addition, the cover can be raised by 30 mm with 4 pads. Outer dimensions: 440 x 240 x 260 ->
When connecting a media player or laptop to a HiFi or PA system, you will often experience noise such as buzzing caused by ground loops.With Palmer Enz you can be sure that such annoying interfering signals will no longer occur!The cause of this interference is mostly the ground potential