Lowest price in the last 45 days: £ 449
Prices and availability may change several times a day. Check the current data directly in the e-shops. You can find all available colors and sizes directly in the e-shops.
SoundID Reference for Multichannel delivers accurate and reliable reference sound for speaker setups from simple stereo up to 9.1.6 atmos systems. It also works for headphones, so you can also calibrate any of the 480+ headphone models from our growing headphone profile database to achieve consistent reference sound between your headphones and speakers.Reliable, consistent, easy to use calibration software for all of your audio system:Accurate speaker measurements and calibration for audio systems from stereo up to 9.1.6 channelsHigh accuracy SoundID Reference Measurement Microphone with individual multi-angle calibration curvesReady-to-use headphone calibration for 480+ modelsControl your target sound:Flat target curve used by over 100k music creators globallyCustomise your target by limiting calibration frequency range or adjusting the target curve manuallyHigh performance and flexibility:Zero latency plugin DSP for MultichannelPhase alignment of channels for high accuracy time delay calibrationNative support for the Apple Silicon platforms / M1 chipExport your calibration profile to supported hardware:AVID MTRX with SPQ DSPAVID MTRX StudioDAD AX32 with SPQ DSPDolby Atmos Renderer Mastering suiteJones-Scanlon Studio MonitorsMore hardware support coming in 2022What's includedActivation key for the product license: the product can be activated and used on 3 machinesSoundID Reference Measurement Microphone with an XLR connection and individual calibration profileMicrophone clip for a Ø21~26mm microphone, with a 5/8' screw-on threadSoundID Reference DAW plugin for Multichannel (AAX, AU, VST2, VST3)SoundID Reference standalone app for Stereo (ASIO, WASAPI, APO, HAL)System requirementsMac: macOS 10.14; 10.15; 11 Big Sur; 12 MontereyPC: Windows 10; 11Microphone stand for multichannel system measurementAudio interface requirements during the speaker measurement process:+48v Phantom Power supportThe same audio interface must be used for input-outputThe audio interface must support and be set to one of the following sample rate formats: 44.1kHz, 48kHz, 88kHz, 96kHz, 192kHzThe audio hardware setup must consist of a single external hardware device only (additional preamp units are supported) Sample Rate: 44.1 kHz Power Supply: 48V Phantom Package Contents: Microphone Clip;Code for Software;Microphone Made in: Latvia Signal to Noise Ratio: 70 dB Compatibility: iOS;Windows Type: Condenser Capsule Type: Electret Condenser Sensitivity: 14 mV Frequency Range: 20 Hz - 20 kHz Polar Pattern: Omnidirectional Switch: No Incl. Gig bag/Case: None Application: Studio USB: No
Product Sonarworks SoundID Reference for Multichannel with Measurement Microphone Measurement Microphone #1896212 is described by the EAN code 4751023410432.
Category | Microphones, Speakers |
EAN | 4751023410432 |
SoundID Reference for Multichannel delivers accurate and reliable reference sound for speaker setups from simple stereo up to 9.1.6 atmos systems. It also works for headphones, so you can also calibrate any of the 480+ headphone models from our growing headphone profile database to achieve
SoundID Reference software calibrates your speakers and studio headphones. SoundID Reference is replacing Sonarworks Reference 4. Rebuilt from scratch and packed with new features. You can now export calibration profiles for your headphones and speakers, and the exported calibration profile can be
Sonarworks Calibrated Measurement Microphone - XREF20R5 | An omnidirectional measurement microphone with individual calibration profile. Every microphone has been measured by Sonarworks acousticians against an ANSI certified measurement microphone. This means perfect accuracy within the audible
Intuitive speaker calibration software anyone can use to measure and calibrate a multichannel setup in less than an hour.Calibrate any multichannel setups up to 9.1.6 Atmos rooms. Compatible with most popular hardware setups and all major DAWs. Supported plugin formats include VST2, VST3 AAX, and
Upgrade from Reference 4 Studio Edition to SoundID Reference for Multichannel.SoundID Reference for Multichannel delivers accurate and reliable reference sound for speaker setups from simple stereo up to 9.1.6 atmos systems. This upgrade allows you to keep all existing room & headphone profiles
SoundID Reference software for speakers and headphones. Includes the SoundID Reference app for Windows and Mac, Measure module for speaker measurement, as well as the DAW plug-in (AU, VST, AAX). Digital download license key delivered electronically; valid for 3 installsSoundID Reference is a
Key to upgrade your copy of SoundID Reference for Speakers & Headphones to SoundID Reference for Multichannel. Digital upgrade key delivered electronically.Intuitive speaker calibration software anyone can use to measure and calibrate a multichannel setup in less than an hour. Accurate speaker
The ECM999 is an omni-directional microphone for free-field measurement with built-in highly-reliable circuit, 1/4” pre-polarized condenser capsule, high stability, low distortion, and less noise in performance. Its excellent flat frequency response make it an idealcandidate for sonic analysis
Ultralinear measurement condenser microphone that is perfectly suited for room equalization, highresolution recording and live applications (mainly acoustic instruments and vocals), and for use with Behringer Ultracurve or any other audio spectrum analyser. Microphone features electret condenser
The MM 1 is a condenser omnidirectiona measurement microphone which has been designed specifically for measuring sound reinforcement and PA-systems. It is designed to work with spectrum analysers for measuring frequency response and sound pressure levels of loud speaker systems. The MM 1 is the
The MM 1 is a condenser omnidirectiona measurement microphone which has been designed specifically for measuring sound reinforcement and PA-systems. It is designed to work with spectrum analysers for measuring frequency response and sound pressure levels of loud speaker systems. The MM 1 is the
140dB maximum SPL, nickel housing, 200ohm impedance, frequency response: 20Hz25kHz (+/2dB), requires 1852V phantom power. Includes clamp, small windscreen (WS1218) and bag (P1). Optional large windscreen (TM1WS) available. Length: 150mm | Made in: China
140dB maximum SPL, nickel housing, 200ohm impedance, frequency response: 20Hz25kHz (+/2dB), requires 1852V phantom power. Includes clamp, small windscreen (WS1218) and bag (P1). Optional large windscreen (TM1WS) available. Length: 150mm | Made in: China
The automatic monitor alignment system (Automatic Monitor Alignment) MA 1 ensures the best possible sound quality in any room, be it a living room or a listening studio. The calibrated measuring microphone in conjunction with the calibration algorithms, developed in cooperation with the Fraunhofer
Package Contents: Holder;Gig Bag;Microphone | Frequency Range: 20 Hz - 20 kHz | Made in: China | Polar Pattern: Omni | Type: Condenser
Premium shielded extension cable for the RØDE's smartLav and smartLav+ TRRS microphones. Measuring 6m/20', it features gold plated contacts for superior audio reproduction. Black colour. | Made in: China | Colour: Black | Length: 6 m | Type-A Connector: TRRS 3,5 mm Jack Male | Type-B Connector: Jack MONO
The 3i-0907-MC3 allows 3 mics to be stored horizontally. Each microphone cutout measures 1.5” wide by 6.75” long with two perforated removable foam pieces, one located on each end allowing microphone sizes up to 8.5” in length. By removing the perforated foam piece near the grill of the
Sensitivity :63 dB +3 dB ( 0 dB=1V/ microbar 1,000 Hz indicated by open circuit ), back electretCondenser, Impedance : 250 30% (at 1,000Hz), 2020.000 Hz, Polar Pattern : omnidirectional, 952 V Phantompower necessary, included clamp and case | Made in: China
With support for Sonarworks SoundID Reference calibration import, the room calibration software will be integrated directly into Image 2 studio monitors.Giving users the ability to create their own calibration profile for their monitor setups to remove unwanted coloration and experience the most
Premium reference drum microphone set that is a hand-selected collection of the highest-quality microphones for touring, live and studio applications. The rugged metal carry case houses a range of the best AKG microphones made for capturing miking drums while simultaneously ensuring safe
As one the smallest omnidirectional microphones in the world, the LC82 MD reference lightweight lavalier microphone takes pride in outperforming mics many times its size. With a diameter of only 3 mm and length of 6.5 mm, it’s ready to take on the biggest stages without making a scene. Ideal for
The Reference 2A monitor measures only 175 mm in width and 290 mm in height and is slimmer than a sheet of A4 paper. Nevertheless, it still offers the full minimum of this series. Thanks to the aptx® Bluetooth® input (version 5.0), the HDMI® input with functional ARC, the phono input and other
Reference multi-pattern condenser microphone that offers a sonic character of the famous AKG C12 from 1953 and choice of nine polar patterns for the perfect sonic capture for every application. It also provides three attenuation levels (-6, -12, -18dB) for close-up recording or high-output sources
The AKG C7 reference handheld condenser microphone delivers premium studio-quality condenser sound and hassle-free operation on any stage. With pristine clarity and sparkling high end, the C7 allows lead and background vocals to shine through. And thanks to specially engineered circuitry and