Gibraltar SC-GBDIMM Accessory for microphone stand

Gibraltar SC-GBDIMM Accessory for microphone stand

Bass drum microphone mount that attaches directly to the lug screws inside the bass drum shell to get perfect internal microphone placement. | Made in: Taiwan

Gibraltar SC-GMQC Microphone Holder

Konig & Meyer 25993 Microphone Boom Stand

Compact, space-saving microphone stand for bass drums, AMPs, Cajons, etc. The flat, stable stand slides for example under a bass drum, an AMP or Cajon and is a good choice wherever a tripod stand might be too bulky. Thanks to the easy height adjustment and the extendable boom arm, the microphone

On-Stage MS7920B Microphone Boom Stand

Microphone stand for miking bass drums or amplifiers that features a 40.6cm boom, a mid-point clutch and a die-cast U-shaped base instead of the heavy tripod design, allowing for placement in the tightest of spaces. Height adjustment: 20.3-35.6 cm. | Made in: China

Konig & Meyer 25950 Microphone Boom Stand

Steel microphone stand with boom arm (model 21140) that features an extra low design for bass drums or special use, and very short, heavy legs and zinc diecast base to provide maximum stability. Boom arm with adjustable length from 425 to 725 mm features a twopiece telescopic design, a wing nut and

Gravity MS 3122 HDB Microphone Boom Stand

Ideal for bass drum micing, the GMS 3122 HDB is a premium quality microphone stand with thick walled tubing, powder coated finish and 32 cm height. The heavy duty tripod base is made of die cast zinc with ultra strong folding legs of steel and hefty rubber caps for surface protection. The boom hub

Konig & Meyer 259/1 Microphone Boom Stand

Microphone stand with extra low design for bass drums or special use. Die-cast base with folding legs. Comes complete with boom arm. Boom arm: one-piece design. Boom arm clamping: T-bar locking screw. Boom arm length: 525 mm. Height: 280 mm. Material: steel. Threaded connector: 3/8''. Weight: 1,9

Hercules MS401B PLUS Microphone Stand

The Hercules Transformer Mic Stand MS401B Plus is ideal for overhead drum applications, fits around other stands, and is perfect for lead vocals or a singer/musician. It features the EZ Mic Clip, EZ Grip height adjustment, tilting base, and swivel legs. Features:EZ Grip height adjustment with only

Samson MB1 Microphone Boom Stand

Heavy-duty adjustable boom mic stand. Ideal for miking drums, speakers and anything close to the floor. Steel construction. Mic clip included. | Weight: 1,4 kg | Made in: China

Bespeco SH120C Accessory for microphone stand

Ukulele or violin stand with hook for microphone stands or music stands. Made of steel. Instrument housing covered with EVA material. |   | | Made in: China

Konig & Meyer 23550 Accessory for microphone stand

Aluminium microphone bar for holding 2 microphones or boom arms that connects to top of microphone stands via 3/8” threaded locking screws. Spacing of the screws is adjustable from 60 to 172 mm. Total length: 200 mm. Weight: 0.06 kg. Black colour. | Made in: Germany

Shure A56D Microphone Shockmount

Compact and sturdy drum microphone mount. Mounts mics to the side of a drum for compact and accurate drum mic placement

Shure BETA 56A Microphone for Snare Drum

supercardioid, stand connection, snare, includes bag. Recommended for toms, percussion and brass instruments. Weight: 468g | Switch: No | Polar Pattern: Supercardioid | Package Contents: Gig Bag;Microphone;Holder | Frequency Range: 50 Hz - 16 kHz | Type: Dynamic | Incl. Gig bag/Case: Yes | Capsule Type:

Konig & Meyer 22150 Accessory for microphone stand

Ceiling stand. Features: To mount a microphone to the ceiling. The rod combination can be detached from the flange using the screw. The length can be set between 610 mm and 1120 mm. Ceiling mounting plate diameter: 105 mm. Material: steel. Threaded connector: 3/8''. Colour: Black. | Made in: Germany

LEWITT LCT 40 SH Microphone Shockmount

Shock mount for studio microphones. Attenuates noise, shock and vibration. Screw thread closure permits fast and easy setup. Compatible with 3/8' and 5/8' threads. Suitable for LCT440PURE, LCT441FLEX, LCT240PRO. | Colour: Black | Made in: China | Original Colour by Producer: Black | Package Quantity (pcs):

Konig & Meyer 240/5 Accessory for microphone stand

Universal microphone holder suitable for many applications. The microphone can be mounted vertically or at an angle of 90°. In addition the hexagonal rod can also be attached horizontally or vertically to the table clamp. The clamping width of 0 to 48 mm allows the clamp to be attached to a wide

Gator Frameworks GFW-MIC-0822 Desk Microphone Stand

Frameworks Telescoping Boom Mic Stand for Desktop Recording, Bass Drum, And Guitar AmpsDetails:Frameworks Telescoping Boom Mic Stand for Desktop Recording, Podcasting, Bass Drum, And Guitar AmpsFits Most Popular Podcast Mics, Including Shure SM7B, Shure MV7, RODE Procaster, & RODE PodMic ModelsCan

Konig & Meyer 236 Accessory for microphone stand

Microphone bar. Connects to top of mic stands for holding 4 microphones or boom arms. 3/8'' locking screws. Material: steel. Length: 365 mm. Weight: 0,3 kg. Colour: Black. | Made in: Germany

Bespeco SF 10 Accessory for microphone stand

Additional gooseneck microphone stand with universal flexible hook that can be attached to any standard stand. Its construction is made of steel and provides maximum carrying capacity of 1 kg. Black and chrome colour combination. | Made in: Italy

LEWITT LCT 40 SH WH Microphone Shockmount

Shock mount for studio microphones. Attenuates noise, shock and vibration. Screw thread closure permits fast and easy setup. Compatible with 3/8' and 5/8' threads. Suitable for LCT440PURE, LCT441FLEX, LCT240PRO. | Application: Recording;Studio | Original Colour by Producer: White | Made in: China | Package

Gator Frameworks GFW-MIC-0821 Microphone Boom Stand

Frameworks bass drum and amp mic stand with single section boomCompact BaseThe hefty, weighted base provides balance and stability to the low-profile kick drum and amp mic stand. The base includes a no-slip, vibration reducing gasket for better sound quality.Single Section Boom ArmThe single

Gator Frameworks GFW-MICACCTRAY Accessory for microphone stand

Gator Frameworks Accessory Tray with Drink Holder and Guitar Pick Tab for Microphone Stand.Pick HolderIf you like to use various pick styles or just have a tendency to loose picks on stage, the built-in, rubberized pick clip tab on the side of the tray allows you to easily store up to five guitar

Rode GN1 Miniature Gooseneck Mount Accessory for microphone stand

The GN1 is a minature gooseneck microphone stand for the RODE NT6. The RODE NT6 comes with a swivel mount that gives you great flexibility, by using the GN1 you also get an added height that allows you to have totally control over the placement of this microphone. Dimensions: 120 x 9 x 9. Weight:

Meinl ID4BKO Ibo drum

integrated microphone hole, includes stand ring, thin bottom, fibreglass, solid construction, diameter 30cm, height 40,5cm. | Type: Ibo Drum | Material: Laminate | Original Colour by Producer: Black | Colour: Black | Made in: Thailand