Lowest price in the last 45 days: £ 80
Prices and availability may change several times a day. Check the current data directly in the e-shops. You can find all available colors and sizes directly in the e-shops.
Gooseneck holder. The guitar mount features a rugged, thumbscrew adjustable clamp with pads that attaches to guitars and other stringed instruments while leaving fewer marks. You can adjust the clamp length between 90 mm and 135 mm.
Category | Stands, Microphones, Clips, Clamps |
Gooseneck holder. The guitar mount features a rugged, thumbscrew adjustable clamp with pads that attaches to guitars and other stringed instruments while leaving fewer marks. You can adjust the clamp length between 90 mm and 135 mm
AT8418 UniMount Microphone Instrument Mount with Rubber-grip spring clamp holds mic securely to instrument that is designed to prevent damage and marking to instrument's finish. Flexible boom permits aiming the microphone in any direction. 16cm long. | Compatible with: AT803;ATM35 | Made in:
Gooseneck holder. The surface mount is designed for accordions and other challenging applications. The notched mount can be attached permanently using the accordion’s grille screw and the included adhesive silicon pad, or it can be attached temporarily using the included fastener tape pads. A
Cardioid condenser clip-on instrument microphone for A-T wireless system. Designed for sax, toms, brass and percussion. Ideal for active stage performances. UniMount clip permits accurate positioning. Cardioid polar pattern reduces pickup of sounds from the sides and rear. Terminated with locking
Microphone Holder for Guitar Cabinets. Features: The spring-loaded clamping arm makes the clamp suitable for almost any type of cabinet and securely fastens to the side or top of a cabinet or combo amplifier. Thanks to its adjustable edge grip, the clamp can be adjusted to fit snugly onto recessed
Clamp mount to easily and quickly connect a d:vote 4099 Instrument Microphone to many types of instruments, such as saxophones and brass instruments. The mounting mechanism makes it easy to move the mic between instruments with one hand. The versatile gooseneck provides stable and repeatable
Prodipe clamp for CL21 Cello micThis clamp is only compatible with CL21 Cello mic. | Compatible with: Microphone | Made in: China | Colour: Black
Alctron TM02 is a creationary accessory for both the studio and the stage. It can clamp directly onto a guitar amplifier or cabinet to hold a microphone firmly and securely by virture of its perfect mechanism, the flexible gooseneck can adjust the microphone in place easily, allowing the player to
Swivel mount with a plastic clamp for miniature microphones. It has a 5/8'-27 female thread, plus a thread adapter to connect to 1/2'- and 3/8' stands. | Package Quantity (pcs): 1 | Compatible with: KM 180;KM 80;KM D;KM 100;KMR Series | Made in: China | Colour: Black | Original Colour by Producer:
This clip-on lavalier mic provides crisp, full-sounding voice pickup. It also excels as an instrument mic, especially for pickup of acoustic guitar. The wired configuration (AT831R) includes the AT8444 guitar mount. The mic is ideal for higher SPL applications, and offers excellent gain before
The HERCULES Tripod Base Boom Mic stand MS532B features the EZ Mic Clip, the 2-in-1 Boom Clamp, and the EZ Clutch. | Made in: China
frequency response: 80Hz-12kHz, on/off switch, 600 Ohms impedance, includes clip. | Type: Dynamic | Battery Operation: No | Switch: Yes | Frequency Range: 80 Hz - 12 kHz | Made in: China | Package Contents: Holder;Microphone;Adapter | Impedance: 600 Ohm | Weight: 340 g | Polar Pattern: Cardioid
48V phantom or battery power (1.5V, 100Hz-14kHz, guitar clip, low cut switch. Includes mic clip, adaptor included), 200ohm, windscreen and battery. (The battery/phantom power module has an XLR male output) 1,8 meter cable. | Made in: Japan | Battery Operation: Yes
Ground Stand (Mobile phone clip + microphone clip) | | Made in: China
The LAV-CLIP is an ergonomic and discreet clip mount for the RODE Lavalier microphone. The LAV-CLIP is supplied in a pack of three. Dimensions: 24 x 11 x 27 mm. Weight: 3 g. | Made in: China
Handheld/stand dynamic instrument microphone with hypercardioid polar pattern from Midnight Blues series that has an optimized frequency response (60 Hz14 kHz) specifically developed for amplified and acoustic instruments – perfect for snare drums or guitar cabinets. Microphone features HiENERGY
Ground Stand (Double microphone clips) | Made in: China
Microphone stand holds microphone securely in place (microphone clip sold separately). Long boom arm with molded plastic counterweight for horizontal placement. Versatile design folds flat for use as straight mic stand. Sturdy steel construction; ultra-light for easy transport. | Type: Stand | Height
The RM3 mic clip effectively secures your microphone to its stand without interfering with its polarity or frequency response. Using RODE stand mounts ensures that your microphones performance is not interfered with. Dimensions: 94 x 35 x 64 mm. Weight: 107 g. | Made in: China
Shock mount microphone clip consists of an isolation mount and adapter that attaches a microphone with a shaft diameter of 3/4inch or larger (25 to 30 mm) to a stand. Shure models with a 3/4inch (25 to 30 mm) mm shaft diameter include SM, KSM, Microflex and more
Microphone clip for fastening KMS 104/105 microphones. The clip is tiltable and has a 5/8'-27 female thread with a reduction to 1/2' and 3/8' for mounting on a microphone stand. It is produced in matte black. | Colour : Black | Compatible with : Neumann KMS105
The Bespeco HM12A stand for drum microphones is designed to be attached to the drum rim, is made of the most durable materials and, thanks to its flexibility, enables precise adjustment of the position of the microphone. | Material: Plastic | Colour: Black | Made in: China | Package Quantity (pcs): 1
Clip to mount a d:vote 4099 Instrument Microphone to an accordion. The mic clip can be attached permanently to the instrument using screws. The versatile gooseneck provides stable and repeatable positioning. The mics can be easily unclipped and repositioned or moved to another instrument. The
Extensible arm microphone stand featuring fixed desktop base and clip-on base desktop stand. Suggested for radio installations and dubbing studios. 5 m XLR – XLR microphone cable included. | Made in: China | Weight: 1,3 kg | Package Contents: Microphone Cable | Incl. Gig bag/Case: None